SPECIAL REPAIRS TO BLDG NO. MLS 3 OFFICE COMPLEX AT 2142 RKT BTY UNDER THE AOR OF GE DEOLALI

Amount

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

S&F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as specified and directed .

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

Dismantling of single layer mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size including titing fillets spaced exc 15cm complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall, fixed with self tapping screws as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified and directed.

Dismantling timber scantling 40 Sqm cm and over in section in any position as in unframed work complete all as specified and directed.

S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed.

M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for 30mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.

M&L for Non Skid Ceramic (dark coloured) tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor over and including 15mm thick screed bed in CM (1:6) , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and directed.

All as per Sl item No 13 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Non Skid Ceramic (dark coloured) tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor over and including 15mm thick screed bed in CM (1:6) , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and directed.

M&L for Glazed ceramic tiles of size 350mmx250mmx 7/ 450mmx350mmx 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for rough dressed sand stone flooring 25mm thick bedded and jointed in 15mm thick screed bed in CM (1:6), set & pointed in CM (1:3), complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including flush pipe and plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.

S&F in repairs Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, including waste pipe complete all as specified and as directed.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/fresh water and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed.

S&F in repairs 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed complete all as specified and as directed.

S&F in repairs CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.

S&F in repairs 15mm bore stop valves ,cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repairs 15mm bore CP fancy type Bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed in repairs capacity of flush 10 ltrs complete all as specified and as directed.

Taking up or down steel tubing 15mm bore & connections and S&F new GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all as specified & as directed.

S&F in repairs Toilet paper holder, steel chromium plated complete all as specified and as directed.

S&F in repairs stainless steel soap dish, approximate size 130x120x30mm complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F in repairs Health faucet MS chromium plated hanging device fixed complete all as specified and as directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.

Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished with 1mm thick sagol finish complete all as specified and as directed.

M&L for rendering 15mm (in two layers 10mm+5mm) thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 3mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each

Taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified.

S&F 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Taking down shutter with frame n exc 1.5 Sqm each complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F for powder coated anodised aluminium frame (any No. of tracks or box type as specified by Engr-in-charge) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings such as suitable handle 01 No., locking arangement 01 No. and roller bearings 04 Nos (02 Top & 02 bottom) in each shutter etc complete all as specified.

M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size aluminium anodized handle complete all as specified and as directed.

M&L for 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete 1:4:8 type (D2 using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

S&F 20mm thick boarding second class with nails/screws in any situation (except flooring and skirting) clean sawn with butt joints.

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for following :-

One Light point controlled by one switch

One fan point controlled by one switch

One 5 pin socket outlet. 5 Amps on the same board.

One 5 pin socket outlet. 5 Amps on the independent. board

One bell point controlled by one switch.

All as item No- 65 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix Bell push button SP 5 Amp, flush type complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F lamp angle/batten holder Bakelite complete all as specified and as directed.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model- Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8DSTL20WLED865SGLASS or equivalent in Wipro/ Philips/Bajaj

Supply and fix in replacement fan regulator 100 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix in repairs sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of following sizes:-

Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

Supply and fix in replacement MCB SPN 32 Amps, 240 volts complete all as specified and as directed. Make L&T/ABB/SIEMENS/ LEGRAND

M & L in replacement of sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in Existing conduits/ PVC capping- casing. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) rate of Casing- capping deemed to be included in the rate quoted.

S&F 25 Watt New generation energy saving and environmental friendly long life LED Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07. Make- Havells, Model - ENDURAPEARLSL25 WLED757SASYTOPC or Equivalent in Wipro/Bajaj/ Philips as approved by GE.

M & L for bracket made out of GI tubing 32 mm dia,light grade 1.0 mtr long including fixing with MS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw -4 Nos & flat washer 01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

S&F 34 watt Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling. Make- Havells, Model-PLUTONEO2X2PLR 34WLED840S

Supplying and Fixing/connecting 1100 volts grade heavy duty Cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire for straching with cable, one twin core cable circular of sizes 10 Sqmm 2 Core Complete all as Specified & as Directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge.

Note: Amount of sch of credit of Rs.36,819.00/-will be deducted from total amount of BOQ.

Alpha Construction

Kaushalya Buildcon

M/S R.K.S. CONSTRUCTION

M/S Chandan Construction Company

Vinod Enterprises

JEET CONSTRUCTIONS CO.

J Sams Contructions

M/S KANNANS