Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹58.8 LAccepted-AOC OPP SHRI NAVNIKETAN H S SCHOOL CHHOLA KANCHI BHOPAL M P 462 010 | BHOPAL | BHOPAL | MADHYA PRADESH | 462010 | L-1 | Accepted-AOC lowest bidder for the work. | |
| 2 | L-2₹71.3 L+₹12.4 L (21.1%)Rejected-Finance 84 A VIJAY NAGAR COLONY LALGHATI PO NAYAPURA BHOPAL 462032 | 462032 | L-2 | Rejected-Finance other than the lowest bidder | |
| 3 | L-3₹71.7 L+₹12.8 L (21.8%)Rejected-Finance | L-3 | Rejected-Finance other than the lowest bidder | |
| 4 | L-4₹74.4 L+₹15.5 L (26.4%)Rejected-Finance | L-4 | Rejected-Finance other than the lowest bidder | |
| 5 | L-5₹77.1 L+₹18.2 L (31.0%)Rejected-Finance | L-5 | Rejected-Finance other than the lowest bidder |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
16 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col M C Patwardhan, Offg CWE
Headquarters, Commander Works Engineer, Bhopal, Military Engineer Services, SI Line, Bhopal, Pin Code - 462001 (Madhya Pradesh)
SMART PERIODICAL FOR MD AND OTM ACCN AT SI LINES UNDER GE BHOPAL
2024_MES_672042_1
83927/E8
Open Tender
Civil Works
Item Rate
180 days
BHOPAL
AS PER NIT CONDITION
7 documents required · 7 mandatory
₹1,000
Yes
GE BHOPAL
₹1.8 L
Yes
28 Nov 2024
5 Sept 2024
18 Oct 2024
5 Sept 2024
16 Oct 2024
4 Oct 2024
5 Sept 2024 - 4 Oct 2024
Amount
Material & labour for complete removal of old existing treatment of wall (External / internal) and ceiling finishes using completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete as specified and as directed. Note Approved OEM equipments to be used as per site requirements.
Material and labour for preparing new plaster surface of wall complete all as specified and as directed. Note :- Approved OEM equipments to be used as per site requirements.
Material & labour for applying waterproof cement based putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (External / internal ) and ceiling surfaces as per sr item No 2 above in following steps:- Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer. Step 3) Apply the first coat of the prepared mix in bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix in horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface complete all as specified and as directed. Note:- (i) Primer shall be measured and paid separately under relevant item. (ii) Make :- Berger Home shield waterproof putty , Asian paint smart care waterproof putty, Nerolac Perma waterproof putty, Berger Homshield waterproof putty. (iii) Approved OEM equipment’s to be used as per technical & site requirements and as mentioned above.
Material & labour for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied on prepared and wall (interior ) surfaces as per sr item No 2 & 4 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make :- Asian royale wall base coat primer, Nerolac premium primer, berger BP white primer complete all as specified and as directed. Note :- Approved OEM equipments to be used as per technical & site requirements and as mentioned above.
Material & labour for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied on prepared and wall (External ) surfaces as per sr item No 1.1 & 1.2 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make :- Berger HS PU RoofKoat primer ,Truecare exterior wall primer ,dulux promise exterior primer , Kansai Nerolac Excel alkali prime primer. Note:- Approved OEM equipments to be used as per technical & site requirements and as mentioned above.
Material & labour for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall as per sr item No 2 to 3 above .Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. MAKE :- Berger weathercoat long life 15 emulsion paint / Apex Ultima Protek Duralife / Dulux weathershield Powerflexx paint/Kansai Nerolac Excel Everlast 12 Note:- Approved OEM equipments to be used as per technical & site requirements and as mentioned above.
Material & labour for applying two coats of oil emulsion distamper over wall and ceiling surface complete all as specified and as directed . Make:- Asian tractor emulsion, Berger Bison or equivalent Note:- Approved OEM equipments to be used as per technical & site requirements and as mentioned above.
Material & labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
Material & labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
Material and labour for preparation of old existing roof surface by washing rubbing down removing oil grease and vegitation etc. and applying Ready made branded chemical treatment of approved OEM to roof / exterior wall / parapet wall / chhajja and any other position complete all as specified and as per site requirement in following steps:- Step-1 Opening of sealed container and dilute the chemical with water @ 1:3 using mechanical mixer to prepare primer and apply one coat of primer using roller complete all as specified and as directed. Allow 4-6 hrs to dry treatment. Step-2 Apply two coats of approved chemical treatment with roller to primed surface as per Manufacturer's Instruction. Note: - Allow 4-6 hrs to dry treatment. Note: - (i) Removal of old roof treatment work and plastering to floor / wall surface will be will be measured and paid separately under respective item. (ii) Work shall be got executed only from approved OEM. Make: - Asian Smart Care Damp Proof / Berger Weather Coat Roof Guard / Nerolac Perma No Damp
Material and labour for preparing and applying Dr. Fixit raincoat in following steps as appended below :- Step-1 Existing substrates cleaned and removed all scale dirt, algae moss, and fungal growth with high pressure water using high pressure jet washer. All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and narrow cracks upto 5mm shall be repaired with crack X-paste and the larger cracks upto 10mm with Dr fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer. Step-2 Material and labour for applying one coat primer Dr. Fixit primeseal diluted with 2:1 with water (primeseal water) maintaining spreading rate @ 8 to 10 sqm/ltr complete all as specified and as directed. Step-3 M & L for applying two coats of Dr Fixit raincoat without any dilution for coverage 3.5 sqm per /ltr and apply second coat of Dr. fixit rain coat without any dilution for coverage 7 sqm/ltr complete all as specified and as directed. Note :- (i) second coat must be applied after lapse of 6 to 8 hours application of first coat. (ii) The application of Dr Fixit raincoat must be avoided at temperature below 10˚C more than 35˚C & in direct sunlight.
Supply & fixing in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S & F galvenised steel wiremesh in size 12mm, 1.40mm nominal dia of wire and fixed with tinned tacks or galvenised wire staples such as chicken mesh in plaster cut to any width complete all as specified and as directed.
Material & labour in repair 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in EACH pane complete all as specified and as directed.
Material & labour in repair 3mm thick sheet glass frosted on one side , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in EACH pane complete all as specified and as directed.
Material & labour for preparing old surface of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of synthatic enamel paint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
Complete removal to unservicable PCC of any type and in position from shunken floor complete all as specified and as directed
M & L for brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed
Material & labour for rendering 15mm thick polymer waterproof mortar plaster using Sika Latex ® SBR @ 0.675kg/m2 in ratio 1:4:8:32 (Sika Latex ® SBR : water: cement : sand) or equivalent mixed mechanicaly with water or as per manufacturer's instruction to wall & slab of shunken or structural repair in patches etc. including taking down old unservicable plaster porperly and prepare surface for application of new plaster complete all as specified and as directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed
Material & labour for rendering 15mm thick in cement mortar 1:4 mixed with waterproofing compound @ 3% by weight of cement on fair faces of brick work or concrete surfaces of wall and finished even and smooth without using extra cement complete all as specified and directed.
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n. exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed.
Supply and fixing GI wire netting 0.90mm dia and 12mm mesh lathing to joists, etc. in walls, ceilings, stanchions, beams, stone wall etc. including all laps, cutting and waste complete all as specified and directed.
Material & labour for filling and mass concrete type D-2 1:4: 8 using 40mm graded stone aggregate in shunken floor complete all as specified and as directed
Providing cement concrete type B-1, 1:2 :4 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material & labour for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.
Material & labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:4 cement mortar complete all as specified and as directed.
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of galvenised steel wire with cement mortar 1:3 complete all as specified and as directed . Note :- Galvenised steel wire netting shall be measured and paid under relevant items.
Material & labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified and as directed.
Material & labour for glazed ceramic tiles in vertical surface 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surface skirting / dedos etc complete all as specified and as directed.
Material & labour for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of EACH tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material & labour in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Material & labour in repair 15mm dia conceled stop valves long shank , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Supply & fixing in repair 10 litres, capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
Material & labour in repair 15mm dia Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Material & labour in repair 15mm dia medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and as directed.
Material & labour in repair 20mm dia medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and as directed.
Supply & fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply & fixing in repair 75mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed
Supply & fixing in repair 110mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed
Supply & fixing 110mm PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing 110mm PVC (SWR) bend inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing 75mm PVC (SWR) bend inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing in repair light coloured vitreous china wash hand basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified and as directed.
Material & labour for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Material & labour in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.
Material & labour in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
Material & labour in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply & fixing in repair vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and as directed.
Material & labour PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Material & labour in repair brass chromium plated shower rose 125mm size fixed to 15mm bore GI / CPVC pipe complete all as specified and as directed.
Taking down and refixing shutter exc. 1 sqm and not exc. 2 sqm in same opening complete all as specified and as directed.
Taking down existing old roof treatment of any description, any type including removal of old Tar felt, screed bed and plastering etc complete all as specified and directed.
Material & labour for roof treatment to RCC roofs with and including comprising of following steps:- (a) Providing bituminous primer grade 85/25 bitumen @ 1.2 kg/Sqm in EACH coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and as directed. (b) Applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and as directed. (c) Material and labour for preparing new bituminous APP membrane surfaces and applying two coats of heat resistance paint complete all as specified and as directed. Note:- (i) Ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the roof slab at least for 72 hrs to be done. (ii) Taking down carefully cables and ACs and removing materials to MES store for keeping in safe custody for re-use at site in functional as earlier and making good disturbed surface of walls, floors, roofs etc. complete all as specified and as directed. Roughening old surface and laying screed bed in cement mortar will be measured and paid separately under relevant item
Supply only integral water proofing compound
Material & labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing with provision of neat cement slurry with 3.0kg of cement per sq. metre. Note :- Water proofing compound will be measured and paid saperately.
Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and as directed.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. Note reinforcement cut as required to facilitate demolition.
Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
Material and labour for preparing new steel surface and applying two coats of synthatic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material & labour for writing letters, figures & digits (Block. Roman, Italic or Indian) building Nos 25 centemeter height with black background and white letters as approved by Engineer-In- Charge complete all as specified and as directed.
Material & labour for writing stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and as directed.
Securing glass of any description in existing steel frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)
POONAM ELECTRIC INDUSTRY (BID ID -3134335)
RAJPATI CONSTRUCTION (BID ID -3141045)
M/S Blues Developers Pvt. ltd (BID ID -3141169)
M/S AJAY JAIN (BID ID -3140977)
JYOTI ENTERPRISES (BID ID -3134272)
Vee kay construction (BID ID -3140451)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .