Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
4 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DRAWING
29 conditions · 9 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
(b) Audited Balance Sheets clearly indicating contractual receipts from the works done for Govt./ Govt. bodies / PSUs/Pvt. Organization in the P&L Account of the balance sheet duly certified by the Chartered Accountant for the completed & current Financial years.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31 st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfilment of the Para No.17.15.2 of part-I of IRSGCC- 2019 for J.V guide lines (with upto date correction slip).
NOTE: If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
Valid Electrical Contractor license: "The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected". The License should have been issued on a date prior to the date of Tender opening. Clear scanned copy is to be submitted along with the tender. A copy of license should be uploaded through IREPS with their offer, failing which the tender will be rejected.
Similar Nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items/equipments) for 230V, 1phase or 415V, 3phase system or higher voltages". a copy of similar nature of work should be uploaded through IREPS with their offer, failing which the tender will be rejected.
94 conditions · 9 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following:
Cost of tender document & EMD deposited through IREPS e- payment
In case of Partnership firm : The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.1.2 only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (As detailed in Standard Technical Criteria).
Submission of Certificate(s) in support of Financial Eligibility (As detailed in Standard financial criteria).
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed 1.3.1 to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv]An undertaking by all partners of the partnership firm that they are not blacklisted or 1.4.1 debarred by Railways or any other Ministry / Department of the Govt. of India / any State Govt. from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 1.4.2 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of 1.4.3 Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 1.4.4 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.5.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint 1.5.2 Venture Agreement on a stamp paper, (c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and 1.5.3 Articles of Association of the Company. (c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
IN CASE THE TENDER VALUE MORE THAN RS. 50 LAKHS; Tenderers shall submit a notarized affidavit on a non-judicial stamp paper stating that all their statements / documents submitted along with bid are true and factual.
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.17 of Part-I of IRSGCC. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document.
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B) For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
IN CASE OF SINGLE PACKET TENDERS; CONSORTIUM AGREEMENTS, JOINT VENTURE FIRMS AND MOUS SHALL NOT BE CONSIDERED
IN CASE OF TWO PACKET TENDERS CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED . BUT JOINT VENTURE FIRMS ARE CONSIDERED FOR ELIGIBILITY.
CONDITIONS FOR PARTICIPATION OF PROPRIETARY FIRM / PARTNERSHIP FIRM /PRIVATE LIMITED COMPANY / LIMITED COMPANY/ JV FIRMS:
In case the tenderer is an individual / proprietary concern, the experience and turnover shall be in the name and style of the Individual / Proprietary concern only.
In case the tenderer is a Partnership Firm, the experience and received contractual payments shall be in the name and style of the firm only. The other guidelines at Clause 18 of Part I of 4.1.1 IRSGCC shall be applicable . Note: The partner of a Partnership Firm cannot claim the credentials of Partnership firm to the extent of his share either during the subsistence of the Partnership firm or after its dissolution.
FOLLOWING DOCUMENTS SHALL BE ENCLOSED:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create 4.2.1 liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company 4.2.2 (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iii) copy of PAN number of the Company.
In case of JOINT VENTURE (JV) FIRMS: Clause No.17 of Part-I of IRSGCC with upto date correction slip shall be applicable in all aspects for Participation of Joint Venture[JV] firms in works tenders. JV firm should submit Memorandum of 4.2.3 Understanding[MOU] as per the format attached as annexure to the tender in DOCUMENTS. Submission of all other documents by JV firm / Members of JV should also be as per Cl.No.17.14 of Part-I of IRSGCC.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 4.2.4 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 4.2.5 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Uploading of other relevant documents connected to the tender; such as Declaration regarding employment of Retired Engineer/ Retired Railway officer, NEFT Form, List of Personnel/Organization, List of Plant/machinery, Particulars of works on hand and completed (As per the formats attached in the list of Documents)etc.
Hyderabad Division: 1) KRNT: Construction of New Type-II quarters (12 Nos.) - Electrical Arrangements 2) Provision of Staff Quarters (Ty-II-06 Nos. & Ty-III-06 Nos) at KRNT station on replacement accounts - Electrical Arrangements
39-SW-26-27-SrDEE-M-HYB~SCR
39-SW-26-27-SrDEE-M-HYB
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.4 L
9 Nov 2026
9 Nov 2026
20 Nov 2026
178 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ 12048689.00 Below/P | ||
| — | 5820.00 | — | — | ||
| Supply & laying of 25 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site | — | — | — | 1,80,420 | |
| — | 2580.00 | — | — | ||
| Supply & laying of 32 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site | — | — | — | 1,41,900 | |
| — | 1320.00 | — | — | ||
| Supply & fixing of PVC conduit moulded bend pipe 32/25 mm dia 2 mm thick in concealed | — | — | — | 36,960 | |
| — | 840.00 | — | — | ||
| Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed | — | — | — | 21,000 | |
| — | 480.00 | — | — | ||
| Supply and laying of flexible 25mm PVC pipe | — | — | — | 8,640 | |
| — | 234.00 | — | — | ||
| Supply & erection of 2 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 9,360 | |
| — | 234.00 | — | — | ||
| Supply & erection of 2 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 10,764 | |
| — | 120.00 | — | — | ||
| Supply & erection of 3 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 7,320 | |
| — | 120.00 | — | — | ||
| Supply & erection of 3 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 9,240 | |
| — | 60.00 | — | — | ||
| Supply & erection of 4 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 4,560 | |
| — | 60.00 | — | — | ||
| Supply & erection of 4 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 5,460 | |
| — | 60.00 | — | — | ||
| Supply & erection of 6 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 5,760 | |
| — | 60.00 | — | — | ||
| Supply & erection of 6 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 7,320 | |
| — | 72.00 | — | — | ||
| Supply & erection of 8 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 8,784 | |
| — | 72.00 | — | — | ||
| Supply & erection of 8 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 11,016 | |
| — | 72.00 | — | — | ||
| Supply & erection of 12 way module size GI sheet metal/PVC box concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 11,376 | |
| — | 72.00 | — | — | ||
| Supply & erection of 12 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 13,608 | |
| — | 72.00 | — | — | ||
| Supply & erection of 18 way module size GI sheet metal/PVC box concealed/surface similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 13,968 | |
| — | 72.00 | — | — | ||
| Supply & erection of 18 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site | — | — | — | 17,424 | |
| — | 2328.00 | — | — | ||
| Supply & erection of 6/10A 1-way switch | — | — | — | 1,51,320 | |
| — | 324.00 | — | — | ||
| Supply & erection of 6/10A 2-way switch as per the directions of Engineer at site | — | — | — | 28,836 | |
| — | 262.00 | — | — | ||
| Supply & erection of 6/10A socket pin with safety shutter | — | — | — | 22,270 | |
| — | 343.00 | — | — | ||
| Supply & erection of 16/20A one way switch | — | — | — | 30,184 | |
| — | 343.00 | — | — | ||
| Supply & fixing of 16/20/10A socket heavy duty with safety shutter | — | — | — | 48,363 | |
| — | 480.00 | — | — | ||
| Supply and erection of ceiling rose. | — | — | — | 19,200 | |
| — | 12900.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor | — | — | — | 2,19,300 | |
| — | 8400.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 2.5 sq. mm FRLS Cu. Conductor | — | — | — | 2,35,200 | |
| — | 7500.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 4 sq. mm FRLS Cu. Conductor | — | — | — | 3,30,000 | |
| — | 1440.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 6 sq. mm FRLS Cu. Conductor | — | — | — | 1,35,360 | |
| — | 1440.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 10 sq. mm FRLS Cu. Conductor | — | — | — | 1,69,920 | |
| — | 480.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 1.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site | — | — | — | 27,840 | |
| — | 24.00 | — | — | ||
| Supply & fixing of ding dong call bell | — | — | — | 5,520 | |
| — | 24.00 | — | — | ||
| Supply & erection of modular type bell push switch as per the directions of Engineer at site | — | — | — | 3,336 | |
| — | 144.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 20 Watts 1200mm LED tube light aluminium fitting with lamp including wiring connections etc. as per enclosed specification | — | — | — | 81,072 | |
| — | 48.00 | — | — | ||
| Supply and fixing of 10W LED tube light 6500K (Cool Day Light) suitable to operate on 230V 50Hz AC supply should be similar to cat no.D531065 of Wipro make be as per detailed specification | — | — | — | 15,600 | |
| — | 48.00 | — | — | ||
| Supply and fixing of 3W foot lights as per specification direction of engineer at site | — | — | — | 16,656 | |
| — | 120.00 | — | — | ||
| Supply and fixing of 9W LED Bulb as per the directions of engineer at site. | — | — | — | 15,600 | |
| — | 78.00 | — | — | ||
| Supply & fixing of 1200 mm sweep energy saving BLDC ceiling fan of copper wound and with remote, 300mm length of down rod, input power not more than 28W, minimum 1.1mm aluminium blade material, double ball bearing, 2 canopy, to be operated in AC single phase supply. | — | — | — | 2,24,016 | |
| — | 72.00 | — | — | ||
| Supply and fixing of of 10"/ 250mm sweep noise less exhaust fan complete with all connected accessories. | — | — | — | 1,39,536 | |
| — | 4.00 | — | — | ||
| "Design, supply, installation, testing and commissioning of cubicle type 14SWG LT panel (Indoor type) with 200 amps sectionalized electrolytic copper bus bar (phase RYBN uniform sizes). LT switchgear confirming to IS-8623 or latest. Advanced Multi function meters with CTs of suitable capacity with R.S.485 port for incoming supply with CTs of suitable and RYB LED indication lamps with all other connected accessories etc., as directed by Engineer at site. 2x100 A 4pole 35/36KA MCCB (I/C), 1x100A change over switch, Out goings: 4x63 Amps RCBO 100mA, 2x16A SP MCB.Note: MCCBs:1) ICs=100% ICu 2) All MCCBs should be microprocessor based" | — | — | — | 4,21,976 | |
| — | 7.00 | — | — | ||
| Supply, erection, commissioning of 8 way TPN vertical double door Distribution Board with the following switchgear 1 x 63A 4 Pole ELCB 6 KA with 100mA sensitivity, 2 x 20A 10KA DPMCB, 2 x 32 A 10kA SPMCBs, 5 x 16 A 10kA SPMCBs, 8 x 10 A 10kA SPMCBs | — | — | — | 86,044 | |
| — | 31.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 4 way single door SPN DB with Acrylic window power coated sheet steel enclosure fitted with bus bar DIN & Nueutral link 1 x 25A DP ELCB 6 KA with 100mA senstivity (I/C), 2 x 20A DPMCB 10KA, 2 x 10A SPMCB 10KA (O/G) | — | — | — | 1,65,850 | |
| — | 3.00 | — | — | ||
| Supply and fixing of 4 way VTPN Distribution Board including all connected accessories etc. | — | — | — | 44,400 | |
| — | 2.00 | — | — | ||
| Supply and fixing of microprocessor type 125A 4P MCCB, 35kA breaking capacity with adjustable microprocessor release conforms to IS/IEC: 60947-2 as per the directions of engineer at site | — | — | — | 25,810 | |
| — | 20.00 | — | — | ||
| Supply, erection, commissioning of 63A 4 Pole ELCB 6 KA with 100mA sensitivity | — | — | — | 74,880 | |
| — | 84.00 | — | — | ||
| Supply and fixing of 20A SP MCB 'C' curve 10KA | — | — | — | 11,676 | |
| — | 2470.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 70 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 14,64,710 | |
| — | 600.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 25 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 1,41,600 | |
| — | 1200.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 4core 16 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 | — | — | — | 2,29,200 | |
| — | 4270.00 | — | — | ||
| Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire | — | — | — | 38,430 | |
| — | 3500.00 | — | — | ||
| Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per the direction of engineer at site. | — | — | — | 4,55,000 | |
| — | 370.00 | — | — | ||
| Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer. | — | — | — | 79,920 | |
| — | 120.00 | — | — | ||
| Supply & fixing with suitable clamps/joints of 50 mm dia "B" class G.I. pipe as per the directions of engineer at site | — | — | — | 1,07,160 | |
| — | 3650.00 | — | — | ||
| Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest, as per the directions of Engineer at site | — | — | — | 6,57,000 | |
| — | 14.00 | — | — | ||
| Supply and fixing of 4 module Plexo Junction Box for MCB IP 65 protection. | — | — | — | 21,420 | |
| — | 340.00 | — | — | ||
| Supply & fixing of cable termination lug as per the site requirement | — | — | — | 34,000 | |
| — | 30.00 | — | — | ||
| Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Single arm bracket for fixing of LED light with all connected accessories, etc. | — | — | — | 2,19,480 | |
| — | 10.00 | — | — | ||
| Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Double arm bracket for fixing of LED light with all connected accessories, etc. | — | — | — | 96,570 | |
| — | 40.00 | — | — | ||
| Excavation of pit for octagonal pole/ poles of suitable size in all type of soils as per the direction of engineer at site | — | — | — | 40,000 | |
| — | 28.00 | — | — | ||
| Provision of concrete foundation and constructing the plinth as per the directions of engineer at site. | — | — | — | 1,12,084 | |
| — | 57.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 60W LED street light complete with necessary clamps and hardware etc. as per Railway specification | — | — | — | 1,60,170 | |
| — | 320.00 | — | — | ||
| Supply, fixing, connecting & commissioning of GI strip of size 25x3 mm as per the directions of the engineer at site. | — | — | — | 22,400 | |
| — | 100.00 | — | — | ||
| Making of 8" bore and HDPE duct installation by HDD method as per the directions. All the joints of casing pipes should be tight and leak proof by HDD method as per the directions of engineer at site. | — | — | — | 3,10,000 | |
| — | 155.00 | — | — | ||
| Supply & erection of Cast Iron LT Cable Marker as per the directions of Engineer at site | — | — | — | 42,625 | |
| — | 400.00 | — | — | ||
| Supply, fabrication and installation of MS checker plates of 6mm thickness along with channels and all connected accessories as per directions of engineer at site. | — | — | — | 27,200 | |
| — | 7.00 | — | — | ||
| Design, supply and fixing of 5 KWp rooftop on-grid solar plant with MPPT technology with Mono PERC Solar Panels of 535wp or above, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT), Inverter (5 KW output puresine wave inverter), and Controls and Protections, interconnect cables and switches including net meter, all complete as per the standard specifications and as per the direction of site Engineer. | — | — | — | 22,47,140 | |
| — | 7.00 | — | — | ||
| Design, supply, installation, testing and commissioning of online monitoring system of solar power plant with 5 years validity and access to web portal, including server charges and connected accessories etc. as per the direction of Engineer at site. | — | — | — | 1,15,640 | |
| — | 50.00 | — | — | ||
| Supply and erection of earth electrode (as per RDSO Drawing No. ETI/OHE/P/7021 & RDSO Spec no. TI0LKO(PSI)/ 38/ 2020 Dt:25.08.2021 or latest) | — | — | — | 3,31,500 | |
| — | 18.00 | — | — | ||
| Supply, installation, testing and commissioning of Single Phase Two Wire Tamper Proof, Static Watt-Hour Meter (Smart meter) of Accuracy class 1.0, 240 v, 50 Hz, Current range 5A- 60A, conforming to Indian Standards: IS-13779, IS-15884, IS-16444, IS-15959 with Dual Mode (Prepaid/Postpaid) Support, Advanced Protection Features, Inbuilt billing data calculation, Microprocessor and LED based Circuitry Meter with functionalities: Advanced metering mobile application on iOS and Android, both which shows all electrical parameters, alerts and supports credit transfer to meter in addition to HES, Load limiting switch with load setting configuration from HES or through app via BLE, Support tamper event and power outage detection and reporting to HES and to app via BLE, Bi-directional communication NB-loT Cellular Communication for remote disconnection also, Tamper proof external enclosure box having IP54 or better, 10 year warranty, Support of atleast 15 mins instantaneous data for voltage, current, pf, freq. energy and maximum demand load profile, meter should transfer the data for billing and tamper to HES using communication NBiOT or GPRS including Two Years Vending Charges & training charges etc. | — | — | — | 2,23,020 | |
| — | 48.00 | — | — | ||
| Supply, installation, testing and commissioning of storage water heater (Geyser) 25Ltrs capacity vertical with following specification. a) Special element protection for long life of heating element b) adjustable thermostat c) Unique temperature indicator dial d) Multiple safety system for cut-off, cut-in e) Fire retardant cable with 3 pin plug f) Suitable for high raise buildings and pressure pump applications g) Five star rated h) 2 years guarantee on product and five years on inner tank. | — | — | — | 3,11,952 | |
| — | 1.00 | — | — | ||
| Supply of Professional infrared thermal camera imager for hot spot and cold spot tracking with minimum of 2.2 inch Colour TFT LCD Display, Visual Camera of 48608 Pixels, selectable colour palette, Image Capture Frequency of atleast 9 Hz, Thermal Sensitivity of 150 mK, Operating Temperature of 0 C to 50 C, Measurement Range of -20 C to 300 C, Accuracy of ± 2 C or ± 2 % (whichever is better), with SD Card Storage of minimum 4 GB, Memory Review option, USB Interface for charging and downloading images, Auto Power off after 10 Mins, Rechargeable Li-Ion Battery with warranty of atleast 2 years including battery, USB Mains charger, Charger Adapter, USB Lead, Micro SD Card, SD Card Adapter and calibration certificate similar to Model No Meggar TC3231 | — | — | — | 1,06,200 | |
| — | 109.00 | — | — | ||
| Supply & fixing of LED mirror light as per specification given below: LED mirror light S/S body with white LED, using existing fixtures in put, Voltage range of 180 to 270V AC power factor>0.90, high power LEDs having efficiency 120 lumens/Watt, THD<10%, driver efficiency>90% etc. complete LED | — | — | — | 1,07,910 | |
| — | 108.00 | — | — | ||
| Supply and fixing of Lamp Holder for LED Bulb as per the directions of engineer at site. | — | — | — | 9,720 | |
| — | 2.00 | — | — | ||
| Supply, deisgn, fabrication and installation of meter box cubicle type 14SWG panel suitable to accommodate 6 Nos of single phase meters along with connectors with 10 sqmm copper wire for termination including glass and all connected accessories as per the direction of engineer at site | — | — | — | 70,000 | |
| — | 4.00 | — | — | ||
| Supply, deisgn, fabrication and installation of meter box cubicle type 14SWG panel suitable to accommodate 2 Nos of single phase meters along with connectors with 10sqmm copper wire for termination including glass and all connected accessories as per the direction of engineer at site | — | — | — | 1,00,000 | |
| — | 3.00 | — | — | ||
| Supply, testing, installation & commissioning 3Ph, 10HP mono submersible, 415V, delivery 50mm, head range 35mts-50mts, 1000LPM, star delta connection including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 1,69,815 | |
| — | 3.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 5HP vertical type energy efficient submersible pump with a total head of 275Mts with a discharge of 20LPM at total head suitable to work on 3-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 1,47,738 | |
| — | 3.00 | — | — | ||
| — | 3.00 | — | — | ||
| — | 600.00 | — | — | ||
| — | — | — | 81,000 | ||
| — | 6.00 | — | — | ||
| — | — | — | 25,500 | ||
| — | 6.00 | — | — | ||
| — | — | — | 40,080 | ||
| — | 6.00 | — | — | ||
| — | — | — | 15,000 | ||
| — | 12.00 | — | — | ||
| — | — | — | 3,456 | ||
| — | 6.00 | — | — | ||
| — | — | — | 21,876 | ||
| — | 6.00 | — | — | ||
| — | — | — | 14,808 | ||
| — | 1200.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 4Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 2,01,600 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NEFTForm.pdf
ATTACHMENT
ExperianceCertificate.pdf
ATTACHMENT
GCC_April-2022_2022_New.pdf
ATTACHMENT
CorrectionSlip2022_CE-I_CT_GCC-2022Policy14.07.2022_1.pdf
ATTACHMENT
ACS-3toGCCApril.2022RBCE_CE-I-CT2023_04_26.pdf
ATTACHMENT
ACS-2toGCC-2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
GCCACS11dt.13.03.2026.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed11.pdf
ATTACHMENT
ApprovedTB39-26-27.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .