REPAIR REPLACEMENT OF PLUMBING CARPENTRY ETC RELATED PETTY WORKS IN CITY AREA ALWAR

Amount

Disconnecting existing tank of capacity exc 250 but not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position including scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical and marking the date of cleaning with white paint and stencil complete all as specified & as directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

Disconnecting existing tank of capacity exc 500 ltr but not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position including scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical and marking the date of cleaning with white paint and stencil complete all as specified & as directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking out old unserviceable PVC pipe with fittings and making good the disturbed surface as per existing complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking out old unserviceable PVC pipe with fittings and making good the disturbed surface as per existing complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F 75mm bore PVC (SWR) single junction (single ‘T’) equal or unequal with access door complete all as specified.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking out old unserviceable PVC pipe with fittings and making good the disturbed surface as per existing complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking out old unserviceable PVC pipe with fittings and making good the disturbed surface as per existing complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified.

S&F 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fittings/fixtures and any obstruction to water supply in rooms, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof in the area of AGE B/R - II ( City Area) Note: (i) Contractor or his authorised representative collect such type of complaints from AGE B/R-II complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor.

Taking up or down 15mm bore steel tubing and connection incl cleaning for refixing or removal to store

Taking up or down 20mm bore steel tubing and connection incl cleaning for refixing or removal to store

S&F galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

S&F galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

S&F as in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F as in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F as in repairs Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed.

S&F as in repairs Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15mm dia (minimum weight 142 gms) complete all as specified and as directed. Make:- Prayag, Polytuf, Jindal

S&F as in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified & as directed.

S&F as in repair Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings complete all as specified.

S&F as in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm complete all as specified.

S&F as in repair vitreous china wash hand basin, white, flat back of size 450mm x 300mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm complete all as specified.

S&F waste fitting 32mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed , complete all as specified.

S&F as in repair waste fitting 32mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed , complete all as specified.

S&F as in repair Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white (ISI marked) of 10 litre capacity with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or 32 mm dia PVC pipe, for low level cistern connections to pipes and fixing of chain and pull, or lever, if any complete all as specified.

S&F as in repair PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides, complete all as specified.

S&F as in repair PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed by Engineer-in-Charge. complete all as specified.

S&F as in repair tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges.

S&F as in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F as in repair brass spindles for 15mm bore size brass CP pillar cocks complete all as specified.

S&F as in repair MS grating CP 100mm dia, with hole for waste pipe of approved make complete all as directed.

S&F as in repair fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S&F as in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms)

S&F as in repair fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S&F as in repair brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F as in repair brass chromium plated shower rose 125mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F as in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified & as directed.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 including taking down old unserviceable sink complete all as specified.

S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.

S&F as in repair stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 4.00 Kg.

S&F as in repair 15 mm bore bib tap, cast copper alloy, chromium plated, with capstan head, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F as in repair 15mm bore bib tap standard of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F as in repair 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repair 15mm bore angle stop valve fancy type of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F as in repair 15mm bore Stop valve fancy type of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F as in repair vitreous china bowl type urinal flat back, size of 465 x 355 x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified.

S&F 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms)

S&F as in repairs swivel shower of PTMT any colour for fixing with 15mm bore pipe, (minimum weight 40 gms) complete all as specified.

S&F in repair chromium plated health faucet for EWC complete all as specified.

S&F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified.

S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe of Cera Cat No CL-113 & CG 425 or equivalent make in Jaquar/Parryware complete all as specified & directed.

S&F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc. complete all as specified & directed by Engr-in-Charge.

S&F in repairs CP towel ring size complete all as specified and directed.

S&F in repairs CP soap dispensar complete all as specified and directed.

S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted. Make :- Prayag (Cat Part No. 554) or equivalent of Commander (Jasmine) / Polytuf / Jindal

S&F in repairs glass corner shelf complete all as specified & as directed.

S&F in repairs glass shelf rectangular type complete all as specified & as directed.

S&F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified.

S&F in repair 2-in-1 CP bib cock complete all as specified and directed by Engr-in-Charge.

S&F in repair 2 way CP angle cock complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs cover for rotational moulded polyethylene water storage tanks of any capacity complete as specified and directed.

S&F in repairs Sink Coupling including PVC flexible waste pipe 80cm long with socket for union, complete all as specified.

S&F in repairs vitreous china counter top basin size 450 x 525 x 195 mm shape oval of Jaquar or equivalent of PARRYWARE / MARC / KINGSTON / SOMANY / ESS ESS / SIECO / KOHLER / HINDWARE / PRAYAG / PARKO including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “Cardiff Range” of Parryware equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved by GE.

S&F in repairs vitreous china wash hand basin white of size 800mm x 475 mm with and including PVC side cabinet and floor mounted cabinet of size 240x140x975 mm and 780x440x800 mm and mirror with PVC frame of size 560x800 mm complete all as approved by Engineer-in-Charge. Make : Somany Cat Part No 10527 (Basin) & 16122 (Cabinet), 170114 (Mirror), 160121 (side cabinet) or equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Hindware, Madhusudan Ceramic as approved by GE.

S&F in repairs vitreous china wash hand basin white of size 600mm x 465 mm with and including PVC side cabinet and floor mounted cabinet of size 200x120x950 mm and 580x340x800 mm and mirror with PVC frame of size 400x700 mm complete all as approved by Engineer-in-Charge. Make : Somany Cat Part No 10527 (Basin) & 16122 (Cabinet), 170114 (Mirror), 160121 (side cabinet) or equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Hindware, Madhusudan Ceramic as approved by GE.

S&F in repairs PVC dropery rod 20-25mm dia fency type fixed with suitable brackets on walls compleete all as directed by Engr-in-charge.

S&F in repairs CP conduit pipe bright finished 19/20mm dia as in curtain rod including suitable brackets for pelmet box.

Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty all as specified and as directed.

S&F for 3mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F for 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified.

Taking down carefully anodized aluminium doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

S&F anodized aluminium frame with power coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

Supply only 4.8mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq.m each pane all as specified and directed by Engr-in-Charge

Supply only 4.8mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified.

Supply only 4mm thick Sheet glass, frosted, on one side and glazing in square n exc 0.5 sq. m in each pane complete all as specified.

Supply only 4mm thick Sheet glass, frosted, on one side and glazing in square exc 0.5 sq. m in each pane complete all as specified.

S&F anodized aluminium grill of approved pattern for windows / ventilators / doors complete as directed and all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified& directed by Engr-in-Charge.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed.

S&F in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. Make :- Godrej / Harrison / Link

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium complete all as specified.

S&F in repair 150mm long aluminum anodised handle complete all as per IS.

S&F in repairs 150mm long aluminum, anodized barrel tower bolts of extruded section all as specified.

S&F in repair 0.56mm thick aluminum sheet fixed with nails to door shutters all as specified.

Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each & removing to store.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store.

S&F 35mm thick IInd class hard wood panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete.

S&F 30mm thick (factory made) glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L Solid PVC single Door Frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory Made Solid PVC Moulded Door Shutter, With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing.

S&F butt hinges 100mm long medium weight cold rolled MS to pressed steel/angle iron frames by welding all as specified.

S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, sections cast or extruted sections or cast aluminium alloy sections and fixing bolts & sliding bolts of extruded section complete all as specified

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified

Resecuring or easing & adjusting, without taking down shutter of any description exc 1 sqm and not exc 2 sqm each all as directed.

M&L for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer,including taking down existing shutter complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3

Taking down plaster in cement mortar over walls/ceiling including racking out joints & hacking for keys.

M&L Rendring 15mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L Rendring 15mm thick in CM 1:4 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparing newly pastered surfaces & applying three coats of white wash on walls all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over 1mm thick birla care putty complete all as specified & directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over primer of approved shade/tint complete all as specified & directed by Engr-in-Charge.

M&L for preparing newly pastered surfaces & applying three coats of white wash on ceiling all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises

M&L 18/19mm thick Machine cut udaipur green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. directed.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed

M&L non skid ceramic tiles colored 300x300x7mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. directed.

M&L for glazed ceramic tiles (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed

M&L for 20mm thick Granite slab of approved shade, in steps, jambs, pillars, windowcills,cooking platforms and like bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Material and labour for writing building numbers {with letters or figures (Block, Roman, Italic or Indian) on plastered surfaces with thick synthetic enamel paint (white) over 20cm dia circle painted with two coats of synthetic enamel paint (Black) complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 Complete all as specified

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre-painted galvalume aluminium zinc coating GI based semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed.

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with 'L' type or J type or cranked hook bolt.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness, complete all as specified and directed.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directed and specified.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with existing frame work including screw as per manufacturers instruction GI frame work for seamless ceiling complete all as specified & as directed.

Arihant Enterprises

M/S GAURI CONSTRUCTION

M/s Laxmi Enterprises

GAR CONSTRUCTIONS

MADAN MOHAN JAIN sons