Renovation and modernisation of control room building at receiving station Hiller Kokernag under UT- CAPEX 2025-26.

Amount

Renovation of electrical wiring by way of providing and fixing of switches lamps wires with required channels and modular plates/switches etc of standard make (4 mmsq =1 coil, 2.5 mmsq=2 coils , 1.5 mmsq = 4 coils , 6 A/10 A switch/indicator = 30 No. , 5 pin socket 6/16 A with switches= 6No., 32 A switch with socket = 04 No. , 15 w LED lamps with holders = 12 No. , 100 w floodlight outdoor with brackets = 02 No. , cieling fan with fan dimmer switch =01 No, MCB 6 A =4 No., 10 A = 4 No. 32 A = 2 No. and 63 A DP = 1 No of standard make along with distribution box complete job

Providing and applying wall putty of specified thickness, of approved brand and manufacturer, over distempered wall ( to be peeled off and cleaning the surface to prepare the surface even and smooth complete. 1 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2 Two coats

Providing and fixing panelled or panelled and glazed shutters for Windows/doors, fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood: With shutter thickness 35 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.. 75x50x2.5 mm(for windows) and 100x75x3.5mm(for doors)

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on doors and windows over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 on slab including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

P&L 15 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering on slab of CRB with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for treatment of slab leakage

Centering and shuttering including strutting, propping etc. and removal of form for Shelves (cast-in-situ)

P&L Reinforced cement concrete in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

P&F Water heater/geyser of reputed brand and make ISI marked 50 Ltr capacity with two angle valves,10m PPR 25mm pipes along with all required accessories

GENIUS ENGINEERS (BID ID -2578857)

YASIR ALTAF VAID (BID ID -2573426)