For Flooring AND Electrification Work at Newly Renovatied office Room at Santoshi Mata Madir District Sitapur

Amount

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers (Asian,cico,durabuild or equivelent Brand as approved by E/I) having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge with 7 years Warranty NSI

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.5 mtr. and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer-in-Charge upto a distance of 30 m from the foundation trenches.

Local sand filling in plinth including supply of necessary quantity of local sand outside the UPPCL permises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(Local from approved local quarry)

Ist class brick work in 1:6 cement & coarse sand (F.M. 1.8 to 2.5) mortar in foundation & plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Ist Class brick (class 150) work in 1:6 cement & coarse sand (FM1.8 to 2.50) mortar but in supper structure but for wall of one brick thick including supply of all materials, labour T&P etc required for proper completion of work.

Concrete with 4 cm. gauge 1st class brick ballast (Class 150) coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and T&P etc. required for proper completion of work.

Cement concrete with 2 cm. gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion 4:2:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work.

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

3mm thick floating coat of Neat cement finish over roof & walls including supply of materials, labour and T&P etc. required for proper completion of work (cement consumtion 0.044 bag/Sq.m.

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)

One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08)

As in item 13.08 but for every coat after the first coat. (CSI No. 13.09)

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect

Wiring point for exhaust fan/Power Plug with 2.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm.thick henolic laminated backelite sheet etc, complete in all respect.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

S/F Batten/Angle Holder/Ceiling rose of approved quality complete in all respect .

Supply and fixing of Bajaj Fresh/Exhaust fan including cost of all materials, labour, T&P etc. for proper completion of the work.

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat.

Supply and fixing of 110 mm dia PVC pipe 4 Kg./ Sq.cm for water supply mains & rain water pipe of Tirupati or equi. Make with special such as Tee, bend, socket, elbow etc. including cutting of pipe where necessary and including excavation of trenches for laying the pipe line of approved size (600 x 900 mm) and including its back filling after testing the pipe line , watering, ramming etc complete including disposal of surplus earth from the sides upto 100 mtr as per direction of Engineer incharge as required for proper completion of work.

Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame.

Renewing panes of 4.00 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

Engaging of labour for misc. civil works with required T&P

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)

Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23)

Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included).

Note :- 1 GST Will paid only extra as applicable. 2 Quantity of individual item may increase or decrease to any extent as per site condition 3 Dismantling item work if recovery required it deducted from contractor bill’s 4 All the item rates including labour cess, no extra payment shall be done.

M/S SWASTIK TRADERS

M/S G.K.TRADERS