Construction of Samudaya Bhavan Building at Kengal Kadapatti RC in Hunagund Taluka Bagalkot Dist

Construction of Samudaya Bhavan Building at Kengal Kadapatti RC in Hunagund Taluka Bagalkot Dist

KSRB 2-2: Earthwork excavation by manual means for foundation of buildings,water supply and sanitary lines and electridal conduits etc, either in pits or in trenches 1.5m and above in width, in soil n...

KSRB 2-2: Earthwork excavation by manual means for foundation of buildings,water supply and sanitary lines and electridal conduits etc, either in pits or in trenches 1.5m and above in width, in soil n...

KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregtes @...

KSRB 2.5 : Earthwork excavation in all soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with ...

KSRB 4.2.8 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine ag...

KSRB 5.4-3 : Providing and constructing granite / trap / basalt size stone masonry in superstructure with cement mortar 1:6 , edges of stones chistle dressed in courses not less than 15 cms high, bond...

KSRB 4-1.7 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ ...

KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05175 cum and fi...

Providing RCC loft (atta) 7.5 cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per desig...

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding ...

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materi...

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, lab...

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttres...

KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels...

KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specificaiton. S...

KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thicknes...

KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specif...

KSRB15-3.11 : Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Provid...

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty, scrapping and levelling the surface using steel blade and preparing the surface even and smoo...

KSRB 9.4-3 : Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves(excluding cost of cem...

Providing and fixing M.S bars to windows and ventilators including cutting making holes in frame work with two coats of approved paints.with all lead and lifts etc complete & as per directions of Engi...

KSRB 9-6.3 : Providing and fixing in position fully panelled Mathi/ Nandi wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide ...

KSRB 9-17.3 : Providing and fixing in positionMathi/ Nandi wood fully panelled shutters for windows with styles and rails of 30mm. thick, 75mm wide in two halves with panels of 20mm thick including co...

KSRB 9-25.3 : Providing and fixing in position fully glazed shutters for ventilators side hung or central pivoted with Mathi/ Nandi wood styles and rails of 30mm. thick, 50mm wide and central divider ...

KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and d...

KSRB 9-27.2 : Fixing of window frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and...

KSRB 9-27.3 : Fixing of ventilator frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm...

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with in...

KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM...

PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with ...

Providing and fixing M.S. Hand railing for Balcony/Staircase etc, with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S. square rod placed vertically, spaced at 100mm at regular interva...

KSRB15-3.14 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffold...

KSRB 14.10-2: Flooring with 20mm thick polished Shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slur...

KSRB 15.1.3 '- do - Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing...

KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dir...

KSRB 15-14.1 : Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the ...

KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knot...

KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all...

Fabrication supplying and erecting M.S.tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable,reliable and corrosion...

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and ...

KSRB15-3.14 : Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffold...

KSRB15-4.2 Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one Kg perbag or in the proportion recommended by the manufactures. cement mortar 1:4, 12mm ...

ELECTRICAL ITEMS

Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2 x 1.5 sqmm (Phase & Neutral) & 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated coppe...

Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2 x 1.5 sqmm (Phase & Neutral) & 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirmin...

Supplying and wiring adopting loop system in existing PVC conduit/casing capping using 2 x 1.5 sqmm (Phase & Neutral) & 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirmin...

Supplying 6A flush type socket and 6 amps/ flush type SP switch either surface /flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wirin...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32 Amps D.P.Switch with all lead and lifts etc complete & as per directions o...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs scews (a) 8...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs scruws (b) ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxed, adhesive paste etc, and running before concreting the slab. The cond...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...

Supplying & fixing of porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. -do- 32 Amps with all lead and lifts etc complete & as per directions of En...

Supply and Installation/fixing/provision of outdoor type Thermoplastic modular panel enclosure with transparent polycarbonate Lid, shock proof, IP65 (Weather proof), rust proof, dust proof, water proo...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball...

Fixing a ceiling/wall mounting fan of all capacities and all types, with necessary clamps and 'S" hook made out of 15mm dia MS rod, with 5 amps, ceiling rose of approved quality with necessary length ...

Fixing all types and all capacities of 1'x4'/2'x2' LED Light fittings indoor on the wall/ceiling/ rasfters/girders with necessary supporting frame,using 23/0.0076" twin twisted PVC insulated wires,req...

Supplying,fixing,wiring earth electrode for grounding conduits, I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit.. The pit should b...

Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated, PVC extruded inner sheath armoured UG LT cable as per IS-1554 (Part-1) r IS-7098 Part-1, Armouring strip thickness in average+ 5% ...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required -do- 6sqmm to 16 sqmm with all lead and lifts etc complete & as per directions...

Supplying and fixing of class-A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV -do- 50mm with all...