SPL REPAIR TO WATER SUPPLY PUMP HOUSE CONTROL PANEL REC VEH SHELTER FOR LRV 01XTOILET NEAR BLDG NO T 127 PATHWAY WITH INTERLOCKING TILES AT CREMATION AREA UNDER AGE B/R II AND E/M AT GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation of pole, stay, filling & mass concrete complete including formwork if required all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 20.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

S&F mild steel work as in roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS angle and tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F mild steel work as in vertical members such as posts including necessary welding, cutting etc conforming to Fe-410-0 (Gde E-250) quality A complete all as specified and directed.

S&F mild steel rolled sections Fe 410-W (Gde E-250) quality - B as in main and cross beams, hip and jack rafters; truss, purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate, framing for cladding, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 16 mm to 20 mm complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre-painted coloured plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for sand filling under floor or in foundations in layes n. exc 25 cm thick including watering and consolidation all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floor complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with gray cement and pigment complete all as specified and directed.

M&L precast PCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar 1:4 including formwork if required complete all as specified and directed. (Note : Precast man hole covers shall be casted on platform as approved by GE, and curing shall be carried out in water tank continously for 14 days, the cost of temp tank and plat form is deemed to be included in this item )

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for size (300mm x 450mm) x 7 to 8mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed. (Pidiproof of Dr.fixit or equivalent)

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

S&F 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 100 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 4.00 mm thick frosted glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in steel ventilator with top hung shutter including hinges steel peg staycomplete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement, etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of white wash on wall complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of colour wash on wall complete all as specified and directed.

S&F white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan european type (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and also including cast iron S trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. (Make: Hindware/Cera/Parryware)

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints laid in trenches or in floor complete all as specified and directed.

S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F 110mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and as directed.

S&F 110mm bore PVC (SWR) 'P' or 'S' trap complete all as specified.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

S&F 75mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and as directed.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F shelf PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

S&F soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F Salt-glazed stoneware gully traps, square or round mouthed of size 150x150mm, (type 'P' or 'S') setting and jointing to drains with cement mortar 1:1 complete all as specified and directed.

S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F in 15 mm Stop valves, cast copper alloy with chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Pillar taps, 15mm bore dia of pipe, fancy type (long neck) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar(1:1) 150mm internal dia of pipe complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

Forming letters, figures etc. by cutting 'V grooves in new lime, cement-lime or cement plaster (per cm of height)' complete all as specified and directed.

M&L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 250 and n exc 400 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for One light point or one fan point /lightpoint/ bell point controlled by one switch

Ditto all as per item No. 91.00 here-in-before but One 3 pin socket outlet, 5 Amp independent

Ditto all as per item No. 91.00 here-in-before but One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

S&F switch socket outlet combination 3 pin 5/6 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 6 pin 5/15 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 5Amp, 230 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed.

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F lamp holder insulated body PVC/ polycarbonate with back plate including 7 Watt LED bulb suitable for batten fitting complete all as specified and as directed.

S&F Exhaust Fan of Size 300mm sweep, 230Volts AC, PVC body, heavy duty including frame and louvers and connection from existing ceiling rose including cutting hole and making good distrurbed surface and necessary fixing arrangement complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit 25mm bore ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

Taking out old/Unserviceable rusted LT Panel board from site complete all as specified and as directed.

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts indoor type Feeder pillar box 'Pedastal type' Confirming to IP 43, CPRI approved, factory fabricated & factroy assembled , waterproof,dust and vermin proof cubical type with locking arrangement , LT Penal made out of suitable size angle iron, channel and fabricated from 3.15 mm thick ( minimum) CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), independently housing for each control switch gear and indicating lamps with & including busbars made of copper duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours. Bus bar shell be properly supported/mounted on epoxy insulators. All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for cable gland and lugs for incoming and out going cable and connecting suitable earth strips. Suitable openable doors shall be provided of all operational switchgear and MCCBs and detchable cover shall be provided on all other accessories. Grouting the pillar box in ground with & including suitable size foundation & plinth of PCC 1:3:6(type C-1 using 20 mm grade stone aggregate) complete. Penal shall be manufactured suitable for housing and including the following duly control wiring with multistranded copper condutor FRLS with colour coding incl connection with copper lugs complete for 3 phase 50 Hz electric supply. INCOMING (a) MCCB 4 pole, 415 Volts, 200 Amps, 25 KA, 100% Icu- 01 No. Make - Legrand/L&T/ABB/Havells OUTGOING (a) MCCB 4 pole, 415 Volts, 100 Amps, 25 KA, 100% Icu- 02 No. Make - Legrand/L&T/ABB/Havells

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts Outdoor type Feeder pillar box 'Pedastal type' Confirming to IP 43, CPRI approved, factory fabricated & factroy assembled , waterproof,dust and vermin proof cubical type with locking arrangement , LT Penal made out of suitable size angle iron, channel and fabricated from 3.15 mm thick ( minimum) CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), independently housing for each control switch gear and indicating lamps with & including busbars made of copper duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours. Bus bar shell be properly supported/mounted on epoxy insulators. All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for cable gland and lugs for incoming and out going cable and connecting suitable earth strips. Suitable openable doors shall be provided of all operational switchgear and MCCBs and detchable cover shall be provided on all other accessories. Grouting the pillar box in ground with & including suitable size foundation & plinth of PCC 1:3:6(type C-1 using 20 mm grade stone aggregate) complete. Penal shall be manufactured suitable for housing and including the following duly control wiring with multistranded copper condutor FRLS with colour coding incl connection with copper lugs complete for 3 phase 50 Hz electric supply. INCOMING (a) MCCB 4 pole, 415 Volts, 160 Amps, 25 KA, 100% Icu- 01 No. Make - Legrand/L&T/ABB/Havells OUTGOING (a) MCCB 4 pole, 415 Volts, 100 Amps, 25 KA, 100% Icu- 02 No. Make - Legrand/L&T/ABB/Havells

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts Outdoor type Feeder pillar box 'Pedastal type' Confirming to IP 43, CPRI approved, factory fabricated & factroy assembled , waterproof,dust and vermin proof cubical type with locking arrangement , LT Penal made out of suitable size angle iron, channel and fabricated from 3.15 mm thick ( minimum) CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), independently housing for each control switch gear and indicating lamps with & including busbars made of copper duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours. Bus bar shell be properly supported/mounted on epoxy insulators. All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for cable gland and lugs for incoming and out going cable and connecting suitable earth strips. Suitable openable doors shall be provided of all operational switchgear and MCCBs and detchable cover shall be provided on all other accessories. Grouting the pillar box in ground with & including suitable size foundation & plinth of PCC 1:3:6(type C-1 using 20 mm grade stone aggregate) complete. Penal shall be manufactured suitable for housing and including the following duly control wiring with multistranded copper condutor FRLS with colour coding incl connection with copper lugs complete for 3 phase 50 Hz electric supply. INCOMING (a) MCCB 4 pole, 415 Volts, 100 Amps, 25 KA, 100% Icu- 01 No. Make - Legrand/L&T/ABB/Havells OUTGOING (a) MCCB 4 pole, 415 Volts, 100 Amps, 25 KA, 100% Icu- 01 No. Make - Legrand/L&T/ABB/Havells

Taking out old/Unserviceable earthing material from site complete all as specified and as directed.

Supply, Installation of Advance Encapsulated compound based CPRI tested Maintenance Free earthing with Zinc & Alloy coated G.I. safe earthing electrode with pipe in pipe technology of not less than 76.30 mm outer dia (thickness not less than - 2.5 mm) and 42.40 mm inner dia (thickness not less than 3.2 mm) and Three meter length, the electrode should be of galvanised with Zinc (80 -100 micron) and Alloy ( 250 - 300 micron) coated. The GI Electrode shall be pre-filled with Crystalline Conductive Material (CCM) . The GI electrode shall be surrounded with 50 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification . GI Electrode Shall be tested from CPRI. The earting pit should be cover with pcc(1:2:4) B1 cover of 450 x 450 mm complete all as specified and directed and as per sketch "A" Zinc and Alloy coated safe earthing electrode should be Make : ASHLOK/INDELEC/ TERCEL/TRUE POWER Note :- (i) Earth Resistance should be less than 2 Ohm. (ii) For each earth electrode excavation to be done of size not less than 3m x 0.75m and excavated soil to be replace with good quality / highly conductive soil, rate deemed to be include in the quoted rate. (iii) All earth connection to be done using special nut bolt.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 13,900.00 (refer Tender Srl Page No 44). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S JANATA CONSTRUCTION

M/S R. K. INDUSTRIES

M/S CONTRACTS

Shree Ram Construction

M/S KAR CONSTRUCTION

M/S TARAN INFRACON

M/S Vaishno Constructions

PRADIP KUMAR BOSE