Renovation and Retrofitting works for the existing Building for Dormitories 6 to 10 in the First Floor of Block No 3 at CENTRAL PRISON PALAYAMKOTTAI IN TIRUNELVELI DISTRICT

Amount

DI0029) Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

C0068.a) Chipping and removal of sounded area of the existing damaged ceiling area and beam Projection and roughening the surface including labour charges and clearing away the debris materials away from the site

PA0038.a) Supplying and applying of rust remover to the corroded rod surface by using of steel wire brush including labour charges, scaffolding and all charges

PA0038.b) Supplying and applying a coating of concresive nitoprime zincerin fosroc 1 llit (or) equivalent shall be applied over the reinforcement

PA0038.c) Providing micro concrete by using 10mm aggregate with polymer materials with necessary support jacking

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PA0042) Painting the old iron work with two coats of approved first class synthetic enamel ready mixed paint including scrapping and removing old paint from structural steel by manual labour

EL0070) Supplying and fixing of 9 watts LED bulb

EL0004) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable (open wiring) b. Light point without ceiling rose

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0012) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for Fan Point (Open wiring)

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

DI0072) Thorough scrapping the old wall paint from plaster surfaced both inside and outside from the existing walls

PA0001) White washing three coats using clean shell lime slaked

PA0002) White washing two coats using clean shell lime slaked

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D-1785 fully concealed in walls c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)

B0025) Brick Work in Cement Mortor 1:6 using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) with admixture b) In First Floor

FW0004) Providing Form work and centering for reinforced cement concrete works b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade c) In First Floor

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

DI0041.a) Dismantling the existing damaged RCC by manual / by using deploying machineries

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

DI0021) Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures

B0053) Brick Partition wall in Cement Mortor 1:4, 110mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) with admixture c) In First Floor

FL0112) Pointing the pressed tiles with CM 1:3 with Admixture including curing etc.,

FL0112.a) Painting two coats of Brushbond roof guard coating and one coat of roof guard primer pointing pressed tiles jointing with SBR Latex

GR0026.a) Supplying, fabricating and fixing in position of MS rectangular hollow section beam of size 160x80x5mm