Reparing and Painting of A.E II Residence

Amount

Ist class B/W in 1:4 with cement coure sand/cum

12mm thick plaster with cement and fine sand of 1.25 F.M. in 1:5 cement mortar at ground floor/M2

Distempering with oil bound washable distemper of approved brand and required shade area new interior wall with two or more coats over and including water thinable priming coat with cement primer complete/M2

Finishing walls with Acrylic smooth exterior paint of required shade two or more coat opplied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied (@) 2.20 kg/10 Sqm (2)

P/F vitrified flor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to is : 15622 of approved make in all colurw and shades,laid on 20mm thick cement mortar 1:4 including grouting the joints with shite cement and matching pigments etc, complete.

P/F 1st quality ceramic glazed wall tiles confirming to IS:15622, of approved wake, in all colour, shades except burgundy, bottol green, black of any size on walls over 12 mm thick bed of ciment mortar 1:3 and joining with grey cement slurry @ 3.3 kg/Sqm including painting in white cement

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : with Chlorpyriphos/Lindane E.C. 20% with 1% concentration

SARLA DEVI CONTRACTOR

MANGLI RAM CONTRACTOR

m/s mohd.sajid thekedar

A U CONSTRUCTIONS

INTJAR AHMAD THEKEDAR