Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.5 L+₹2.9 L (10.2%)Rejected-Finance R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹31.9 L+₹3.3 L (11.5%)Rejected-Finance | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹31.9 L+₹3.3 L (11.5%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹32.4 L+₹3.7 L (13.1%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L5 | Rejected-Finance Other Than L1 |
Tender Value
₹40.1 L
EMD Value
₹80,500
Closing Date
18 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col V S Sengar, Cdr
HQ 138 Works Engineers PIN-914138 C/O 56 APO
SPECIAL REPAIR TO BLDG NO P 123 (CENTRAL MI ROOM) AND PROVN OF HARDSTANDING AT MT FOR 255 (I) ABOU AT KARU UNDER GE 860 EWS
2023_MES_573762_1
138WE/L-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 860 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 860 EWS
₹80,500
Yes
14 Mar 2023
11 Jan 2023
25 Feb 2023
11 Jan 2023
18 Feb 2023
25 Jan 2023
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and as directed by Engr-in-Charge.
Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface Broken stone or boulders, complete all as specified and as directed by Engr-in-Charge.
M & L for PCC 1:4:8 type D-2 using (40 mm graded stone aggregate) as in sub - base 100mm thick, complete all as specified and as directed by Engr-in-Charge.
M & L for PCC Cement concrete type B-1,1:2:4 (20mm graded aggregate) floor finishing 100 mm thick, complete all as specified and as directed by Engr-in-Charge.
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade'B', complete all as specified and as directed by Engr-in-Charge.
Removing excavated material nexc 50 m and deposited where directed at a level n. exc 1.50m above the starting point, complete all as specified and as directed by Engr-in-Charge.
Finishing surface of concrete hardstanding by brooming, complete all as specified and as directed by Engr-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets including scantling complete all as specified and as directed by Engr-in Charge
S&F of coloured PVC designer Modular wall clading 5 to 6mm thick with air gap between installed with U shapped GI Channel with end joints on edges (Designed, colour patterns as per directed by GE). The frame work will be fixed to wall using aluminium screws complete all as specified and as directed by Engr-in-Charge Note :- If necessary size of the frame work/wall panelling will be changed as per site requirement
S&F grid false celling GI system powder coated prelude (main runner sec 32x24x0.30x3600mm), cross tee 25x24x0.30x1200mm, walll angle 24x24x0.40x3000mm and including providing and fixing 9mm thick gypsum boad designer of size 595x595 mm fixed in celling frame work), complete all as specified and as directed by Engr-in-Charge.
Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed by Engr-in Charge.
Taking down chowkats or frame not exc 1.5 sqm each with shutters without taking off shutters from the frames, complete all as specified and as directed by Engr-in-Charge.
Taking down carefully aluminium door after removing glass (if required) and re-fix to same or other opening after making size adjustment or repair for the same for proper functioning including rubber gasket for holding of glass, complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised windows with side hung shutters / sliding shutters and frame made with aluminium section with and including glass/particle board 12mm thick (as specified below) Aluminium sections shall be of size as given below:- Frame : 44.5x44.5x1.60mm thick Top/bottom rail; 90x44.5mmx1.60mm thick side style/rails of shutter-44.5x44.5mmx1.60mm thick Glass : 5mm thick plain glass, sun control film fixed with rubber gasket with aluminium beading . Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and making good of wall surface with matching to existing surface, complete all as specified and as directed by Engr-in-Charge.
S&F for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engr-in-Charge.
S&F of 30mm thick 2nd class hard wood (shisham) glaze and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded , complete all as specified and as directed by Engr-in-Charge.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm Aluminium handles, cast type, anodised, complete all as specified and as directed by Engr-in-Charge.
M&L for two coat of synthetic enamel (ordinary tint each coat) over a coat priming with pink primer on new or previously untreated wooden surface, complete all as specified and as directed by Engr in Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed by Engr in Charge.
S&F 4mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane, complete all as specified and as directed by Engr in Charge.
S&F in repair of galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed by Engr in Charge.
S&F in repair of aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as speicified and as directed by Engr in Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as speicified and as directed by Engr in Charge.
Demolition of Bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles, complete all as speicified and as directed by Engr in Charge.
M & L Precast cement concrete solid block made of cement concrete type C1 1:3:6 using (20mm graded stone aggregate) in masonary , exc. 10cm in width and, setting in cement mortar 1:6, complete all as speicified and as directed by Engr in Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as speicified and as directed by Engr in Charge.
M&L for Rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra, complete all as speicified and as directed by Engr in Charge.
M&L for preparation of new plastered surfaces and apply two coats of cement base paint, complete all as speicified and as directed by Engr in Charge.
Material and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces fair and even smooth without using extra cement, complete all as speicified and as directed by Engr in Charge.
M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion over a coat of putty, complete all as speicified and as directed by Engr in Charge.
M&L for Rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement, complete all as speicified and as directed by Engr in Charge.
M&L for preparation surface and apply three coats of white wash on newly plastered surface, complete all as speicified and as directed by Engr in Charge.
M&L for joint free glazed ceramic coloured tiles 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over 15m thick CM (1:6) in such as skirting dado etc incl circular cutting or notching and waste etc, complete all as specified and as directed by the Engr-in- Charge.
M&L for coloured ceramic non skid joint free tiles of size 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, over 15mm thick screed bed or bedding layer of cement mortar in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.
Material and labour for coloured glazed ceramic tiles in vertical surfaces size300x200x7mm thick set and jointed in cement neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1: 4, complete all as specified and as directed by Engr-in-Charge.
M&L for coloured ceramic non skid joint free tiles of size 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38, over 15mm thick screed bed or bedding layer of cement mortar in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engr-in-Charge
Material and labour for 25mm thick type B1 PCC 1:2:4 (20mm graded aggregate in sub base, complete all as speicified and as directed by Engr in Charge.
M&L for demolition of reinforced cement concrete in any description or in any position (reinforcement cut as required to facilitate demolition), complete all as speicified and as directed by Engr in Charge.
M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded aggregatet) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like, complete all as speicified and as directed by Engr in Charge.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as speicified and as directed by Engr in Charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engr in Charge.
Taking up or down 15mm dia steel tubing and connections, complete all as specified and as directed by the Engr-in-Charge.
Taking up or down 20mm dia steel tubing and connections,complete all as specified and as directed by the Engr-in-Charge.
S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 15 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc, complete all as specified and as directed by the Engineer -in-Charge.
S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 20 mm pipes SDR 7.4 (PN-16) UV stablized and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, celling or in floors etc, complete all as specified and as directed by the Engineer -in-Charge.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed by Engr in Charge.
S&F in repair vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm with integral foot rest white with CI "P" or "S" trap front or back inlet including PCC bedding, complete all as speicified and as directed by Engr in Charge.
S & F in repair of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc, complete all as speicified and as directed by Engr in Charge.
S&F in repair wash down water closet EWC (Cascade type) vitrious china white in colour one piece (incl flush cistern, seat cover) with all fittings & fixture complete and fixing with outlet pipe, complete all as specified and as directed by the Engineer-in-Charge
S&F in repair of 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed, complete all as speicified and as directed by Engr in Charge.
S&F in repair of 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as speicified and as directed by Engr in Charge.
S&F in repair of Viterous China wash hand basin with pedestal coloured, flat back of 550 x 400 mm including brackets, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of 750mm long, complete all as speicified and as directed by Engr in Charge.
S&F in repair of 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as speicified and as directed by Engr in Charge.
S&F in repair of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed, complete all as speicified and as directed by Engr in Charge.
S&F in repair of PVC connection 15mm size with PTMT nuts of length 450mm fixed, complete all as speicified and as directed by Engr in Charge.
S&F 32mm bore and 800mm long PVC corrugated waste pipe, complete all as specified and as as directed by Engr-in-Charge
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as speicified and as directed by Engr in Charge.
Dismantling water tanks exc 500 and n.exc 1000 Ltr, complete all as speicified and as directed by Engr in Charge.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,complete all as speicified and as directed by Engr in Charge.
S&F in repairs brass chromium plated health faucet with 1.5m flexible chromium pipe screw down suitable for 15mm bore pipe/fittings with angle cock with CP brass check nut and holder, complete all as speicified and as directed by Engr in Charge.
S&F aluminium anodised glazed door complete with shutter size of style top rail and lock rail 83x45x1.60mm thick and bottom rail 114x44x1.60mm thick and door frame size 63x38x1.60 mm including aluminium mongry fitting, hinges, tower bolt, handle, lock etc all necessary fittings and glazing with 5mm thick tinted glass/12mm thick pre laminated particle board complete including rubber lining at sides for air locking with & incl floor spring, complete all as speicified and as directed by Engr in Charge.
Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as speicified and as directed by Engr in Charge.
Material and labour for light shade vetrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,over 15mm thick screed bed or bedding layer of cement mortar in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, complete all as speicified and as directed by Engr in Charge.
S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe, complete all as specified and as directed by Engr in Charge.
S&F in repair viterious china urinal half install type, white including urinal spreader complete including chromium plated brass waste fitting, complete all as speicified and as directed by Engr in Charge.
Preparation of old treated/decorated surfaces (plastered or unplastered) concrete wall cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds mass efflorescent salts trading old and greasy spots etc and applying one coat of cement base paint on old treated surfaces of walls, complete all as speicified and as directed by Engr in Charge.
Supply and fixing in repairs to Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as speicified and as directed by Engr in Charge.
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as speicified and as directed by Engr in Charge.
M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of switches / sockets etc,complete all as speicified and as directed by Engr in Charge.
All as per srl item no. 72 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board, complete all as speicified and as directed by Engr in Charge.
All as per srl item no. 72 here-in-before but for one socket outlet 3 pin, 5 Amps on same board, complete all as speicified and as directed by Engr in Charge.
All as per srl item no. 72 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point, complete all as speicified and as directed by Engr in Charge. Note : The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit pipe.
S&F, in replacement, of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as speicified and as directed by Engr in Charge.
S&F, in repalcement, of Switch Socket Combination, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as speicified and as directed by Engr in Charge.
S&F, in repalcement, of Switch Socket Socket combination, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as speicified and as directed by Engr in Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as speicified and as directed by Engr in Charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as speicified and as directed by Engr in Charge.
S&F, in replacement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as speicified and as directed by Engr in Charge.
M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, non metallic casing caping accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as speicified and as directed by Engr in Charge. Note : 1. The cost of casing caping & accessories is deemed to be included in quoted rates. 2. The two run of 6 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of MCB, C Curve type, 10 kA, 25 to 63 Amp, TPN with over load and short circuit protection, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection,complete all as speicified and as directed by Engr in Charge.
S&F in replacement of MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as speicified and as directed by Engr in Charge.
M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as speicified and as directed by Engr in Charge.
S&F in replacement of recessed mounted LED light fitting of 2' x 2' size, suitable for false ceiling, 36 Watt, 6500K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections, complete all as speicified and as directed by Engr in Charge.
M/S BHAT ENGINEERS
SHANTI ENTERPRISES
M/S TRADE LINK
M/s Aman Enterprises
M/s Koul & Sons
PADMA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .