ADDN/ALTN TO TOILETS AND OTHER AMENITIES AT VARIOUS LOCATIONS AND PROVN OF QTY FIRE RETARDANT FALSE CEILING AT CERTAIN LOCATIONS AT HQTC (U) BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Note:- All debris & rubbish shall be removed from MoD land during or at the end of each working period at his own risk and cost in accordance with all applicable federal, state and local regulation. After removel of debris area to be cleaned and levelled as directrd by Engr-in-Charge.

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4.all as specified and as directed

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 600x300x7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4.all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for. Note:- All debris & rubbish shall be removed from MoD land during or at the end of each working period at his own risk and cost in accordance with all applicable federal, state and local regulation. After removel of debris area to be cleaned and levelled as directrd by Engr-in-Charge.

M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, all as specified and directed.

M&L for non skid Ceramic tiles coloured 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM 1:6 all as specified and as directed

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 all as specified

All as per item No:07 but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.

M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking plateform, widow sill, step, wall lining and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick mortar in CM 1:6.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden not exceeding 1.5 Sqm each.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden exceeding 1.5 Sqm not exceeding 4 Sqm each.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site etc complete all as speicfied and directed

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel,

S&F for 125mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125mm Aluminium handles, cast type anodised.

S&F in repairs 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L second class 35mm thick Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs powder coated anodised aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F in repairs sheet glass, of 4.8mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane.

S&F 18/19mm Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Supplying & fixing of Internal auto closing concealed hinge, Kutchina'/Hettich/Hafele make complete all as directed.

Supply & fixing of 6" premium quality crome finish Handle, "Kutchina"/Hettich/Hafele make complete all as directed.

Supply & fixing of good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long , "Kutchina"/Hettich/Hafele Make.

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.

S&F in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified of make- Jaguar Cat No-FON-40081/OPP5037PM

S&F in repair soap Dish Make-Jaguar Code No- CAN-1137/AKP-35731P

S&F in repair Toilet paper roll holder with flap of Make-Jaguar Code No- AKP-35753P

S & F in repairs single lever basin mixture with popup waste system with 450 mm long braided hoses all as directed Make: Jaquar-LYR-38051B/ORP-10011BPM

S & F in repairs table top basin of size 170x835x455 mm/565X425X140mm of whitecolour complete all as specified and directed make-Jaquqr Cat No-KUS-WHT 35935/ JDS-WHT-0547

S&F in repairs premium quality 15mm pillar tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified of make- Jaguar Cat No-FON-40081/OPP5037PM

S&F in repairs 15mm bore hand shower (Health Faucet) with 8 mm Dia, 1 Meter Long flexible tube & wall hook of make: Jaguar Cat No- ALD -573/ALD 577

S&F in repair Towel rail of 600 mm long Make-Jaguar Cat no-AHS-1507

S&F in repair glass shelf of 600 mm long with cp bracket.Make-Jaguar Cat no-CAN-1171N or equailent.

S & F Rimless Single Piece-WC with UF slim seat cover, hinges fixing accessories and accessories Set,Cistern fitting,size 380mmx670mmx765mm with hydraulic sheet cover and connecting to 'S' trap 300 mm incl taking down old complete.Make Jaguar FSS-WHT-29853S300UFSM / OPS-WHT-0205.

S&F in repairs CP connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete.Make jaguar cat no-ALD-805B.

S&F stainless steel Gratings size 125 mm dia complete all as specified & directed.

S&F Towel rack without lower hanger of 600 mm long and 03 no hooks Make-Jaguar Code No- AHS-1581

S&F Towel ring square with round flange of Make-Jaguar Code No-ACN-CHR-7721

S&F in repair angle stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, all as specified and as directed Make-Jaguar Cat no-CON 059KN

S & F in repairss fancy type CP 2 way bib cock with wall flanges fixed as in repair all as specified.

S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S & F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F in repairs PVC connection 15mm size 450mmlong with CP PTMT nuts all as specified.

S & F in repair Vitreous china wash down water closet (Pedestal pattern), white including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S & F fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.

S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

Taking up or down 15mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed by Engineer In Charge.

Taking up or down 20 mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed by Engineer In Charge.

Taking up or down 25 mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed by Engineer In Charge.

S&F UPVC 16 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.

S&F UPVC 20 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.

S&F UPVC 25 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.

S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.

S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including necessary fixing cleats/ clamps, complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.

S&F in repairs PVC bends of 110 mm dia complete all as specified and directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and directed.

PVC (SWR) branch piece, of 110 mm dia single (single Y) equal or unequal

Dismantling water tanks, capacity in litres exc 500 & n exc 1000 and removing to store.

S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F ball valves 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm dia and fixed

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc. all as specified.

Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement.

M&L for preparing new plastered on ceiling and applying three coats of white wash.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement. all as specified and direction by Engr in Charge.

M&L Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

M&L Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer on surfaces of walls.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M & L of Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match all as specified and directed.

M&L for 50mm thick Cement concrete type B1, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. all as specified.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 20 mm thick screed bed of cement mortar (1:6).all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation all as specified and as directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for floor including finishing the surface even and smooth with using extra cement all as specified.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply,laminate and cove) as directed

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil

M & L for plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings including special shaped washer etc complete using ERW or induction butt welded tubes Conforming to IS 1161-1979 grade St -240 all as specified and directed

Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/ loose soil

M&L 12mm thick for HPL (high pressure lamination) board durable toilet partition system of size 1000x1500x 1950 mm modular polished surface incl necessary joinery fitting like SS Hinges, Handles,Sliding bolt/tower bolt etc. complete all as specified and directed .

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) orinsulation boards /slabs/blankets, any thickness, includingcover fillet all as specified and directed.

S&F 5.5mm thick ceiling board with powder coated GI suspended ceiling with 9mm wide T section. The frame work comprises of main runner at 1200mm c/c. The last hanger at end of each main runner should not be greater than 450mm from wall. T channel 1200mm long cross was to be inter locked between main work at 600mm long cross to centrally between the 1200mm cross tees main T channell suspended with 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with following specifications and directed by Engr in Charge:- (a) Ceiling board dimension 595x595mm (b) Weight - 5.94Kg/Sqm (c) Density - 1200Kg/Cum (d) Acoustics - 34 DB (e) Moisture resistance - Yes (f) Fire resistance - Yes (g) Thermal Insulation - Yes

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted through mechnical means. over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment all as specified and directed by Engr in Charge.

Taking down carefully U/S aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.

Taking down ceiling fan & dismantaling blades & refixing of the same including provision of suitable size of fan down rod below the false ceiling height as per the site requirement, Painting of Ceiling Fan complete with Syntetic enamel paint by spray painting including filling patty work connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed.

Taking down & Refixing for geyser of sizes 50/25 ltrs capacity after repairs in new position including drilling holes on wall ,fixing four Nos anchor bolts,nuts and washers and connecting to the water and electric connections and testing complete all as directed.

Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed, FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC conduit Concealed in walls/ floors/ ceiling etc with and including fixing of metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light point controlled by one way switch

One Ceiling fan point controlled by one way switch

One Exhaust fan point controlled by one way switch

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket point 5 Amps on Same board.

All as per item No 109 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated sheathed continuous earth continuity for 3 pin 15 amps socket outlet independently.

Cutting chasis, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring into the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Supply & fix ceiling rose surface backelite two to three terminal complete all as directed.

Supply and fixing of modular type fan regulator upto 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm.

Supply & fix switch modular single pole 1 way 6 Amp 230 volt complete as directed.

Supply & fix switch modular single pole 1 way 16 Amp 230 volt complete as directed.

Supply & fix socket 6 Amps modular type, 230 volts complete as directed.

Supply & fix Socket 6A/16A - modular type 230 volts complete as directed.

Supply and fixing of modular white cover plate with frame, 2 module

Supply and fixing of modular white cover plate with frame, 3 module

Supply and fixing of modular white cover plate with frame, 4 module

Supply and fixing of modular white cover plate with frame, 6 module

Supply and fixing of metal flush box 2 module

Supply and fixing of metal flush box 3 module

Supply and fixing of metal flush box 4 module

Supply and fixing of metal flush box 6 module

Supply and fixing in repairs of LED Light fitting of 20 Watts, 220 volts, AC decorative box type with driver

Supply and fixing in repairs of LED Light fitting of 2 feet, 10 Watts, 220 volts, AC decorative box type with driver

Supply and fixing in repairs of LED Bldg Security Light fitting of 45 Watts, 220 volts, IP 65/66 Protection complete with driver, holder including connecting up with 2 core flexible copper conductor cable of suitable size.

Supply and fixing in repairs round shape 12 watt 220 volts AC, recessed type with high efficiency, PMMA diffuser, soft glare free light complete with drivers, holders, LED lamp suitable, for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing in repairs of DB, SPN 8 ways, Double door type complete all as specified and as directed

Supply and fixing in repairs of DB, SPN 2 ways, single door type complete all as specified and as directed

Supply & fix in repairs of MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed

Supply & fix in repairs MCB SPN 32 Amps 240 volts 10 KA rupturing capacity complete all as directed

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Supply and fixing Exhaust fan, steel body AC Single of size 300 mm sweep with blades and frames, louvers complete voltage 230 volts, 50 HZ Complete all as specified and as directed.

SRUSHTI CONSTRUCTIONS

raashi constructions

M R CONSTRUCTIONS

OM CONSTRUCTIONS