SPECIAL REPAIR TO CERTAIN SMQS OR OMQS AT 31 WING AF UNDER GE AF PANAGARH

Amount

Removing existing damaged roof treatment including screed bed or bedding layers and removing the debris from outside of MoD land as directed by Engineer-In-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Material and labour for PCC 1:2:4 type B0 12.50 mm crushed stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item

Material and labour for applying evenly a priming coat with cold bituminous primer at 0.25 ltr/sqm over dry surface as directed by Engineer-In-Charge.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Material and labour for preparation of APP membrane applying one coat of aluminium paint at 0.11 ltr/sqm over APP membrane as directed by Engineer-In-Charge.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item

Material and labour for 5 mm thick rendering in cement mortar 1:3 on ceiling surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additive @ 1.43 litre/ 10 Sqm over and including a coat of exterior primer applied @ 0.902 litre/ 10 Sqm complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer and 3 mm thick wall care putty complete all as specified.

Material and labour for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified.

Material and labour for complete removal of existing treatment of wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additive @ 1.43 litre/ 10 Sqm over and including a coat of exterior primer applied @ 0.902 litre/ 10 Sqm complete all as specified.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer and 3 mm thick wall care putty complete all as specified.

Material and labour for complete removal of existing treatment of ceiling surfaces and applying three coats of white wash complete all as specified.

Supply only liquid water proofing compound as per manufacturer instruction.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each. Including hold fasts and PCC block all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4.00 Sqm each. Including hold fasts and PCC block all as specified.

Taking down Shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm for each leaf all as specified.

Taking down Shutters of any description exceeding 2.0 sqm for each leaf all as specified.

Refixing Shutters of any description exceeding 2.0 sqm for each leaf all as specified.

Supply and fix Pressed steel frames of sizes 165 mm x 60 mm made of 1.25 mm thick cold rolled mild steel sheet for doors with one or more rebates including necessary PCC work as in back filling, hold fast including hinges (100/50 mm stainless steel), lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black bituminous paint including hinges, hold fast/ lugs etc., and necessary mild steel work to fixed the frame into the hold fast complete all as specified.

Supply and fix Pressed steel frames of sizes 125 mm x 60 mm made of 1.25 mm thick cold rolled mild steel sheet for doors with one or more rebates including necessary PCC work as in back filling, hold fast including hinges (100/50 mm stainless steel), lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black bituminous paint including hinges, hold fast/ lugs etc., and necessary mild steel work to fixed the frame into the hold fast complete all as specified.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Material and labour foe 35 mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP.commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Supply and fix 35 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars,. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Material and labour for 18 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including all necessary fittings complete all as specified.

Supply and fix 100 mm size of hasp and staple, safety type, brass with aluminium anodized hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and 2 nos of 150 mm long steel tower bolts and steel peg stay, complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and 2 nos of 150 mm long steel tower bolts and steel peg stay, complete without glazing bars, dovetailed or welded, including locking arrangements complete all as specified.

Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Supply and fix stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fix 3 mm thick sheet glass ,ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified. Make: SAINT GOBAIN GLASS / MODIGUARD / HINDUSTHAN PILKINGTON

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 150 mm long aluminium alloy handles, cast type, anodized all as specified.

Supply and fix 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Supply and fix steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified.

Supply and fix 4 mm thick figured glass ,pinheaded and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified. Make: SAINT GOBAIN GLASS / MODIGUARD / HINDUSTHAN PILKINGTON

Supply and fix as in repairs, 150 mm long aluminium alloy handles, cast type, anodized all as specified.

Supply and fix as in repairs, 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

Supply and fix as in repairs, 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Material and labour for providing cement concrete 1:3:6 type C1 with using 20 mm graded stone aggregates as in hold fast including necessary form work complete all as specified.

Supply and fix 300 mm long mild steel , ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden/steel chowkhats with flat iron 40 mm x 3 mm size 750 mm long with necessary bolts/ welding complete all as specified.

Supply and fix as in repairs 300 mm long mild steel , ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden/steel chowkhats with flat iron 40 mm x 3 mm size 750 mm long with necessary bolts/ welding complete all as specified.

Supply and fix as in repairs, harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified.

Material and labour for prepration new or previously untreated wood or wood base materials of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and labour for old wood or wood base materials of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified.

Material and labour for old steel or iron surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Supply and fix as in repairs, stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Hacking out old broken glass (any thickness, size quality or description ) from wooden frames of stone, concrete or brick sorrunds, glazed with putty or fixed with nails all as specified.

Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work as directed by Engineer-In-Charge. Note: Reinforced will be cut and measured including this item

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified.

Material and labour for formwork to sides and soffits of rough finished flat surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type B1 using 20 mm crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like complete all as specified. Note:- Reinforcement and form work shall be measured and paid on separate item.

Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type B1 using 20 mm crushed stone aggregates as in beams, cantilevers, bressummers, lintels complete all as specified. Note:- Reinforcement and form work shall be measured and paid on separate item.

Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type B1 using 20 mm crushed stone aggregates as in chajjas complete all as specified. Note:- Reinforcement and form work shall be measured and paid on separate item.

Dismantling water tanks of capacity exceeding 250 ltr but not exceeding 500 ltr and removing to store as directed by Engineer-In-Charge.

Dismantling water tanks of capacity exceeding 500 ltr but not exceeding 1000 ltr and removing to store as directed by Engineer-In-Charge.

Supply and fix Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 25 mm dia Ball valves (Minimum weight of valve 455 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified including dismantling the old unserviceable one. Make:Sintex/ Astral/ Finolex/ Supreme

Refixing 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified.

Disconnecting existing tanks of Capacity exceeding 250 ltr but not exceeding 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge.

Disconnecting existing tanks of Capacity exceeding 500 ltr but not exceeding 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge.

Supply and fix 20 mm dia ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified

Taking up or down water tubing 32 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.

Taking up or down water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.

Taking up or down water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.

Supply, lay and fix 32 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply and fix as in repairs, white vitreous wash basin (without pedestal) ,including 32 mm dia chromium plated waste coupling, waste pipe, cutting for and pinning in ends of brackets or erecting stand complete all as specified. Make of Basin - Johnshon Cat No P6215PW/ Jaquar Cat No FNS-WHT-40801/ Cera Cat No S2040115

Supply and fix as in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. Make: Diamond/ Nirali/ Grohe/ Kohler

Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW

Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as specified. Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW

Supply and fix as in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. Make: Prayag Polymer Pvt. Ltd./ Parryware/ Blue Star & Silver Shine

Supply and fix as in repairs 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103

Supply and fix brass CP single lever shower mixer for connection to hand shower with connecting legs & wall flanges for mixing hot and cold water complete all as specified. Make:- Parryware Cat No T3858A1/ Jaquar Cat No KUP-35149PM / Marc Cat No MMO-2030

Supply and fix as in repairs 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction. Make:- Jaquar Cat No FON-40053/ Johnson Cat No T3410C/ Cera Cat No F2008201

Supply and fix as in repairs 15 mm bore CP pillar tap, quarter turn concealed type with aerator complete as per manufacturer instruction. Make:- Jaquar Cat No CON-021KN/ Parryware Cat No G4002A1/ Cera Cat No F1015101

Supply and fix as in repairs,15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030

Supply and fix as in repairs brass CP shower rose with or without swivel joints, 125 mm size, including fixing to steel pipe or union complete all as specified. Make:- Jaquar / Parryware / Marc

Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified. Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff

Material and labour as in repair 150 mm x 150 mm of size stainless steel floor trap, square type flat slooted gratings with frame as per manufacturer instruction. Make: PRAYAG/ JAQUAR/ MARC

Supply and fix as in repairs, 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. Make: Jaquar/ Cera/ Marc

Dismantling of 100 mm dia pipe cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as directed.

Supply and fix 100 mm dia cast iron soil, waste and vent (spun) pipes in any length with or without ears, with cement joints, laid in trenches or in floors including necessary bends, tees complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries Note: Bend and tee should be measured and paid on separate item

Supply and fix 100 mm dia cast iron soil, waste and vent (spun) pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries Note: Bend and tee should be measured and paid on separate item

Supply and fix 75 mm dia cast iron soil, waste and vent (spun) pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries Note: Bend and tee should be measured and paid on separate item

Supply and fix 75 mm dia cast iron soil, waste and vent (spun) pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries Note: Bend and tee should be measured and paid on separate item

Supply only 100 mm bore cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply only 75 mm bore cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 100 mm bore cast iron cowls Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 75 mm bore cast iron cowls Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 100 mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 75 mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 75 mm bore cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 100 mm bore cast iron socket, double collars complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 75 mm bore cast iron socket, double collars complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Material and labour for 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm crushed stone aggregates complete all as specified. Make:- Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix as in repairs, 180 mm x 100 mm salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' complete all as specified.

Supply and fix 100 mm bore stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

Supply and fix 75 mm bore stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge.

Material and labour for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4 complete all as specified.

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 300 mm x 200 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 300 mm x 300 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 10 mm thick joint free premium quality dark shed vitrified ceramic tiles of size 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for Coloured chequered cement concrete tiles, machine pressed, factory made of size 300 mm x 300 mm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 20 mm thick screed bed in CM 1:4 complete all as specified. Make: Ultra/ Bansal/ Anjali

Demolition of Brickwork built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework in and precast concrete articles

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius,built in cement mortar (1:6), complete all as specified and as directed.

Material and labour for half brick thick work with fly ash bricks built in cement mortar 1:4 straight or curved on plan to any radius complete all as specified.

Demolition of existing roof padding including roof treatment complete carefully by cutting, chiselling etc cleaning the surfaces by scrapping, booming brushing etc and removing the rubbish from site to a distance exc 50m and n.exc 100m all as directed by the Engineer-in-Charge and M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacture's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing coat of bitumen primer @ 0.40 Kg/Sqm complete in horizontal and vertical surfaces of sunken floor. (iii) Providing coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm over primer surfaces alongwith aluminium paint @ 0.11 Kg/Sqm over the APP. (iv) Providing a layer of APP based polymeric membrance of approved manufacturer, 4mm thick reinforced with polyester non wooven fabrix (weighing not less than 150 gm/ Sqm) laid by torch application method, side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's insructions and provided upto a height o 60cm in the parapets and inserted inside the parapets by cutting a groove and finished by membrane flashing complete all as directed.

Material and labour for 75 mm thick PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregates as in plinth protection laid to slope 1:12 and finished the surface even and smooth without using extra cement complete all as specified.

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete, including fittings such as switches,ceiling roses,pendants,regulators sockets etc.,removing from site and making good disturbed surfaces of walls,floors,ceiling etc.,all as directed

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Havells(ISI Marked)/ Finolex(ISI Marked)/ KEI(ISI Marked)

All as per Item No 122 here in above but for One light/ one fan point controlled by one switch Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per Item No 122 here in above but for 5 pin socket outlet 6 Amp socket point (Independent board) Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per Item No 122 here in above but for one 5 pin socket outlet 6 Amp socket point (same board) Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per item No.122 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 5 pin, 16 Amp socket outlet, independent, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: Havells/ Legrand/ Schnieder/ L&T

Supply and fix as in repairs Switch piano, flush type single pole one way 16 Amps 240V. Make: Havells/ Legrand/ Schnieder/ L&T

Supply and fix switch socket outlet , 3 pin 6 Amps 240 V flush type . Make: Havells/ Legrand/ Schnieder/ L&T

Supply and fix switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: Havells/ Legrand/ Schnieder/ L&T

Supply and fix ceiling fan regulator socketed, step type heavy duty suitable to work on 230 volts AC supply complete with cover plate all as specified. Make: Havells/ Legrand/ Schnieder/ L&T

Supply and fix ceiling rose surface baklite with three terminals 240 V. Make: Havells/Legrand/Schneider

Supply and fixing sub-main wiring with PVC insulated & unsheathed four run of 6.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith two run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit complete all as specified. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fixing sub-main wiring with PVC insulated & unsheathed four run of 4.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith two run of 2.50 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 20 mm PVC conduit complete all as specified. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fixing sub-main wiring with PVC insulated & unsheathed four run of 2.50 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith two run of 1.50 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 20 mm PVC conduit complete all as specified. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fix sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 8 ways 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'C' curve all as specified. Make: ABB/ Siemens/ Schneider

Supply and fix MCB SP 240 volts, 50 Hz capacity 40 Amps 'C' curve all as specified. Make: ABB/ Siemens/ Schneider

Supply and fix MCB SPN 240 volts, 50 Hz capacity 6-32 Amps 'C' curve all as specified. Make: ABB/ Siemens/ Schneider

Supply and fix MCB SPN 240 volts, 50 Hz capacity 40 Amps 'C' curve all as specified. Make: ABB/ Siemens/ Schneider

Supply and fix 18-20 W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver Double sided connection and all accessores complete all as specifed and directed. Make:- Bajaj Cat No- BLRB 18W LED/ Havells LED Item Description LUMILINEPLUSBS20WLED865SPCSS/ Crompton Cat No LTT8-20 Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted to the Engineer-In-Charge for LED light fittings (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to Engineer-In-Charge (c) LED light fitting and drivers shall be of same make.

Supply and fix 10 W LED bulk head light energy saving, surface mounted, decorative type LED with driver IP 65 luminiares and all accessores complete all as specifed and directed. Make:- Bajaj Cat No- BIBWP 10W LED/ Havells LED Item Description HEXAFT10WLED857SSYMBOPC/ Crompton Cat No LBHE-10-CDL Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: Anchor (Penta)/Havells/ Cona/Plaza

Supply and fix bell push flush type 6 Amps. Make: Anchor (Penta)/Havells/ Cona/Plaza

Supply and fix call bell ding dong type SP 230V. Make: Anchor (Penta)/Havells/ Cona/Plaza

M/S SWAPAN KUMAR MONDAL

SUPARNA TRADING