Work

Amount

Carriage of structure/materials from Electy. fabrication unit Naini Prayagraj/other Substations To 132 KV S/S Amawan.

Sorting, counting, stacking erection mark wise and proper loading of structure truck/tralier (10.21 MT)

Safe carriage of loaded structure from electy. fabrication unit Naini Prayagraj To 132 KV S/S Amawan-Raebareli . Distance approx. 150 km (7.38 MT X150 km=1107MT-KM)

Safe carriage of loaded structure from 132 KV S/S Baccharawan-Raebareli To 132 KV S/S Amawan-Raebareli. Distance approx. 150 km (2.83 MT X45 km=127.35 MT-KM)

Unloading of carriage structure from Truck/Trailer its Sorting, Counting and proper Stacking at the S/S premises as per direction of supervisioning engineer (10.21 MT)

Carriage of 02MT 40mm MS round bar from 220 KV S/S Hardoi road, Lucknow to 132 KV S/S Amawann, Raebareli including cost of Truck/trailer, Labour and T&P required for same.

Safe Caariage of 15 MT 50mm x 6 mm MS Flat from Central Store -Sultanpur To 132 KV S/S Amawan-Raebareli including cost of loading of Flats from store and cost of unloading and shifting of Flats to store at 132 KV S/S Amawan(15 MT X 100 km=1500 MT-KM)

Safe Caariage of 03 no. 145 KV CTs from 132 KV S/S Salon-Raebareli To 132 KV S/S Amawan-Raebareli including cost of loading and shifting of CTs from store at 132 KV S/S Salon and cost of unloading and shifting of CTs to store at 132 KV S/S Amawan.

Transportation of towers and their extensions including required nut/bolt, templates, stubs etc. from 132 KV S/S Dalmau-Raebareli to 132 KV S/S Amawan-Raebareli (64 KM X 9.304 MT)

Safe Caariage of 145 KV Post Insulators from 220 KV S/S Baccharawan-Raebareli To 132 KV S/S Amawan-Raebareli including cost of loading and shifting of PIs from store at 220 KV S/S Baccharawan and cost of unloading and shifting of PIs to store at 132 KV S/S Amawan.

Survey of new route for 132 KV Amawan-Tripula Circuit- II -

Survey including preparation of schedule of materials, marking of locations (route length), GPS survey of line with co-ordinates of each tower(Length of new line should be authenticated by GPS survey)

Check Survey and peg marking

Cost of excavation of 132 KV Tower foundation pits including earthwork, backfilling, levelling etc.

Setting of Stub of 132 KV DC/+5 Tower including all foundation work but excluding cost of concreting and excavation

Cost of concreting(1:2:4) for tower foundation including cost of cement, dewatering, shoring and shuttering, forming, curing but excluding cost of reinforcement bars.

Installation of steel reinforcement bars in RCC foundation including cost of steel reinforcement bars with cutting, bending, placing etc.

Erection of Superstructure of 132 KV Towers(With N&Bs) with their extensions whereever required including all work above ground level excluding hoisting of insulators, hardware and accessories.

Tack welding of all bolts upto the height of one section of tower or 5 mtr above ground level whichever is higher with three tacks at 1200 separation of miimum 10 mm thickness with 10/12 mm electrode & application of zinc rich aluminium paint on the affected surface including cost of all materials.

Laying , stringing, tension clamping, joining etc of ACSR Panther Conductor including hoisting of insulator, fitting of all accessories like armour rods, vibration dampers etc on all three phases of 132 KV Line.

Laying , stringing, tension clamping, joining etc of 7/10 SWG Ground Wire including hoisting of insulator, fitting of all necessary accessories like vibration dampers etc on 132 KV Line.

Grounding work including earth work etc for pipe type grounding including cost of coke and salt.

Cooping of foundations and levelling of excavated soil and other associated jobs

Erection of following structure/equipments as per instruction of various equipments manuals and technical specifications including shifting of structures/equipments from store to erection site including all other associated works for completion of erection work satisfactorily:-

Auxiliary structures (AXM-01 Nos.BBL-02 Nos, BTI-01 Set., BCT-06 Nos., ALP-5 Nos.)

132 KV SF-6 Circuit Breaker

132 KV C.Ts

132 KV Bus Isolator without earth blades

132 KV Line Isolator with earth blades

132 KV Tandem Isolator

120 KV Lightening Arresters

132 KV C.T./P.T. Junction box

145 KV Post Insulators

Gear box mechanism of 145 KV LSI, BSI & TI

Jumpering of all equipments of 132 KV feeder bay with ACSR Panther conductor between Main & Transfer bus with help of suitable clamps/fittings to be provided by department including hoisting of 120 KN disc insulator on each phase on 132 KV gantry with suspension clamps.

Earthmat laying in extended switchyard for 132 KV Amawan- Raebareli Ckt-II Bay/Transformer-III Bay

Fabrication of 3M long 40mm diameter electrode with following MS Rod having 150mm long conical shape and then its piercing vertically inside the ground with top 50mm below ground level and its welding with earth mat excluding the cost of MS Bar.

Extension of MS Round Bar Earth Mat 40mm by digging of earth cutting, laying, welding and back filling of earth and doing all other associated work to complete the job satisfactorily excluding cost of MS Round Bar.

Cutting, straightening & laying of following MS flat 700 mm below inside ground and above ground of 75 mm x 10 mm size, 50 mm x 6 mm size and 25 mm x 6 mm size MS Flats for earthing of main auxiliary structures, equipment and cable trenches including welding with main earthmat and with the object to be earthed excavation of trenches its back filling painting and all other associated work to complete the earthing work satisfactorily as per technical specification (MS Flat will be provided by department).

Earthing of main structures with 75 mm x 10 mm size MS Flat.

Earthing of main structures with 50 mm x 6 mm size MS Flat.

Earthing of auxiliary structures and equipments with 25 mm x 6 mm size MS Flat.

Earthing of cable trenches/Racks with 25 mm x 6 mm size MS Flat.

Prepartion of Interconnection diagram of cable schedule as per drawings to complete job including C.B., C.T., Isolators etc. & submission of same in hard bound sets of 03 copies to the department.

Laying of following size of control cables in the cable trenches and relay panels in control room to various equipments, junction boxes, etc. in switchyard as per cable schedule its saddling with 25X3mm size including carriage of cable drums from stores to work site and shifting back to store with all other associated works to complete the job satisfactorily as per technical specifications:-

Laying of 2X2.5 sqmm size control cable

Laying of 4X2.5 sqmm size control cable

Laying of 6X2.5 sqmm size control cable

Laying of 10X2.5 sqmm size control cable

Providing & Fixing of Name Plate made of 2mm Thick Alu. sheet with covering of 3M HIP/ Equivalent retro reflective sheet of size 300mmx150mm plate to fixed with the help of Nut & Bolts already installed equipement (C.B.-02No., BSI-02 No., LSI-02 Shutdown Board-02No.) (content to be printed on Name Plate will be provided by department)

Providing & Fixing of Phase Plates made of 2mm Thick Alu. sheet with covering of 3M HIP/ Equivalent retro reflective sheet of size 300mmx150mm plate to fixed with the help of Nut & Bolts already installed equipement (C.T. - 09 Nos., P.T.-03 Nos., L.A.-12 Nos., B.T.I.-06 Nos.) (content to be printed on Phase Plate will be provided by department)

Dismantling of 03 no. 132 KV PTs alongwith BCT Structure from 132 KV Line Bay and safe shifting of Structure and 132 KV PTs to new 132 KV Line Bay.

Delta earthing of 120 KV LA consisting of 06 nos. electrode its placing inside the ground and connecting all three electrodes with M.S. flat and connecting the same with main earthmat at two place required excluding cost of MS strip and MS roud bar.

De-Stringing of old conductor from gantry to new tower location of all three phases and earthwire

Dismantling of 01 no. of C type tower

Proper Stacking of dismantled tower, rolling of de-stringed conductor at substation store including its safe transportation from site to store

Lighting enhahcement in extended switchyard for Transformer Bay and Line Bay

Providing & fixing of new generation energy & environment friendly long aluminium outdoor beam street light with high power 120 watt LEDs as light source & exclusively designed polycarbonate cover along with electronic driver complete fitting suitable for 220 Volt AC input supply of CGL/Havells/ Surya/Philips/Bajaj etc. Including wiring from junction box to light fitting point and checking of healthyness of LED lights.

Supply and installation of junction box of size 280x225x150 mm made of 16 SWG sheet with grey painting suitable for 2x4x6 C sq mm incoming cable and 2x4x6 C sq mm outgoing cable fitted with 03 Nos. HRC fuse link of 5 Amp. cable glands, nutral link, terminal block etc and fixing of junction box on columns with the help of 50x6 mm GI Clamp.

Supply and fixing of pipe bend of 50/35 mm dia GI 'B' Class pipe 1.5 meter long bended at 1 meter at an angle of 30o for light in switchyard.

Taking out 2C x2.5, 4Cx2.5 sq mm copper control cable from junction box light fittings fixed over the column by fixing G.I. clamps of 40x5mm flat with each crossed bracing on structures.

Providing & Fixing of outdoor type AC power supply cubical of 16 SWG MS sheet Vermin proof having 03 Nos. Alu. Bas Bar for RY B-Phase and 01 No. netural bas bar of size 25x12 mm and 25x6 mm respectively. The cubical will have 16 Nos. 32 Amp. 3 Phase MCB And 08 Nos. 06 Amp. Singal Phase MCB of Havell's make with indication Lamp wiring detail as per tech. specification.

Laying of L.T. power cable of size 95/50 sq. mm for ACDB from control room to designated point for ACDB.

Termination of ACDB by L.T. power cable of size 95/50 sq. mm includes laying and termination of cable with crimping of lugs etc.

Installation of 250 KVA 33/0.4 KV Station Transformer on transformer plinth and proper earthing of Station Transformer through MS Earth flat

Laying of power cable for substation transformer of size 400 sq. mm for substation transformer from control room to designated point for substation transformer.

Termination of substation transformer by power cable of size 400 sq. mm includes laying and termination of cable with crimping of lugs etc.

Painting of all sizes of M.S. flat/strips above ground with one coat of red oxide primer and two coat of synthetic enameled green Japan paint after thorough rubbing and cleaning of strips including the cost of paint.

Construction of Open Yard Store for Proper Stacking of Equipments

Cleaning of area of open-yard store (20Mx20M) by removing grass, rubbish and foreign materials with help of hasiyan, talwar etc. with associated works, labour and T&P.

Shifting of store items like C.T./CVT/ Isolator/L.A. etc. for cleaning of above said area and re-shifting & stacking properly of them as directed by Engineer in-charge of work. Crane, labour and other T&Ps will be arranged by the contractor.

Concreting work of flooring surface 20cm thick with 40mm gauge first class brick ballast obtained from breaking bricks in propotion of 12:6:1 of brick ballast coarse sand (F.M.1.5 to 2.0) and cement including cost of all materials, labour and T&P required for proper completion of work. The work also includes levelling & dressing of surface area by ramming etc. and alo providing soil if required to complete the job satisfactorily before concreting works.

12mm thick plaster for smoothing the surface area of floor of above said size in propotion of 1:2 of cement and coarse sand (F.M.1.5 to 2.0) over brick work including supply of all material labour and T&P required for completion of work including curing & caring works untill obtaining sufficient hardness and durability of plaster.

Suplly of Material:-

Four bolted PG clamp made of Al-alloy LM6 with spring washer along with GI bolts and nuts suitable for - (as per sample)

Moose To Moose

Moose To Panther

Panther To Panther

Five Bolted tension fitting suitable for Twin Moose conductor without turn buckle for 33KV Main bus bar suitable for 70 KN disc insulator string with hardware fitting, D-shackle, D-shocket, yoke plate,bolt hook, D-clip, tension clamp etc.

Five Bolted tension fitting suitable for Twin Moose conductor with turn buckle for 33KV Main bus bar suitable for 70 KN disc insulator string with hardware fitting, D-shackle, D-shocket, yoke plate,bolt hook, D-clip, tension clamp etc.

Rigid spacer to be used with twin moose conductor of bus bar.

Rigid spacer to be used with twin panther conductor jumpers .

36 KV C.T. clamp made of LM6 Al-alloy for Twin Panther (as per sample).

36 KV Isolator clamp made of LM6 Al-alloy for Twin Panther (as per sample).

36 KV C.B. clamp made of LM6 Al-alloy for Twin Panther (as per sample).

Fuse Set Assembly for 250KVA 33/0.4KV station transformer

Cable Tray made of galvanised Iron of breadth 6"

Cable Tray made of galvanised Iron of breadth 4"

CONDUCTOR ACCESSORIES SUITABLE FOR ACSR Panther

Single Tension fitting

vibration Dampers

Performed Armour Rod

EARTHWIRE ACCESSORIES SUITABLE FOR 7/10 EARTHWIRE

Suspension clamp

Tension clamp

vibration Dampers

copper bonds

145 KV Bus Post Insulator(BPI) terminal connector/clamp (as per sample)

MS RK ERACTORS

SHIVAM ENGINEERS

ARK ENGINEERING

Hi-tech power transmission