Provision of Safety fencing for the length of 180 km on (B) Routes with speed 130 kmph and above other than vulnerable locations in JTJ-PTJ Sec. ( DEN/East/SA Jurisdiction)

applicable to SALEM DIVISION with all correction slips issued upto date - Including Cement.

Item- 1 Please see Item Breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as

2.6 well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m

and for all lift, as directed by Engineer-in-

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as

2.7 well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

3 4.3.1 Foundations, footings, bases for columns Sqm 7917.71 392.15 3104929.98

4.14S MISCELLANEOUS

Providing and laying in position ready mixed or

site batched design mix cement concrete for

plain cement concrete work; using coarse

aggregate and fine aggregate derived from

natural sources, Portland Pozzolana/Ordinary

Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to

4.20 accelerate / retard setting of concrete, to

i m p r o v e durability and workability without

impairing strength; including pumping of

concrete to site of laying, curing, carriage for all

leads; but excluding the cost of centering,

shuttering and finishing as per direction of the

engineer-in-charge; for the following grades of

4.20.1 All works upto plinth level :

4.20.1.3 Concrete of M20 grade with minimum cement cum 2989.21 9212.6 27538396.05

content of 270 kg /cum

10.0 STEEL WORK

10.1S General

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

10.16.3 Electric resistance or induction butt welded Kg 14743.05 194.4 2866048.92

13.0 FINISHING

13.44S EXTERIOR FINISHING

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

SALEM DIVISION-ENGINEERING/SOUTHERN RLY