Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.7 L
Closing Date
1 Sept 2026, 3:00 pm5d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
DRAWING
29 conditions · 9 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
(b) Audited Balance Sheets clearly indicating contractual receipts from the works done for Govt./ Govt. bodies / PSUs/Pvt. Organization in the P&L Account of the balance sheet duly certified by the Chartered Accountant for the completed & current Financial years.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31 st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets. (iv) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfilment of the Para No.17.15.2 of part-I of IRSGCC- 2019 for J.V guide lines (with upto date correction slip).
NOTE: If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
Similar Nature of work: "Works of installation, testing and commissioning of motor driven pump sets (with or without supply of motor/pump sets) (Or) AMC/repairs to motor driven pump sets." a copy of similar nature of work should be uploaded through IREPS with their offer, failing which the tender will be rejected.
Valid Electrical Contractor license: "The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected". The License should have been issued on a date prior to the date of Tender opening. Clear scanned copy is to be submitted along with the tender. A copy of license should be uploaded through IREPS with their offer, failing which the tender will be rejected.
94 conditions · 9 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following:
Cost of tender document & EMD deposited through IREPS e- payment
In case of Partnership firm : The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.1.2 only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (As detailed in Standard Technical Criteria).
Submission of Certificate(s) in support of Financial Eligibility (As detailed in Standard financial criteria).
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed 1.3.1 to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv]An undertaking by all partners of the partnership firm that they are not blacklisted or 1.4.1 debarred by Railways or any other Ministry / Department of the Govt. of India / any State Govt. from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 1.4.2 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of 1.4.3 Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 1.4.4 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.5.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint 1.5.2 Venture Agreement on a stamp paper, (c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and 1.5.3 Articles of Association of the Company. (c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
IN CASE THE TENDER VALUE MORE THAN RS. 50 LAKHS; Tenderers shall submit a notarized affidavit on a non-judicial stamp paper stating that all their statements / documents submitted along with bid are true and factual.
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.17 of Part-I of IRSGCC. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document.
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B) For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
IN CASE OF SINGLE PACKET TENDERS; CONSORTIUM AGREEMENTS, JOINT VENTURE FIRMS AND MOUS SHALL NOT BE CONSIDERED
IN CASE OF TWO PACKET TENDERS CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED . BUT JOINT VENTURE FIRMS ARE CONSIDERED FOR ELIGIBILITY.
CONDITIONS FOR PARTICIPATION OF PROPRIETARY FIRM / PARTNERSHIP FIRM /PRIVATE LIMITED COMPANY / LIMITED COMPANY/ JV FIRMS:
In case the tenderer is an individual / proprietary concern, the experience and turnover shall be in the name and style of the Individual / Proprietary concern only.
In case the tenderer is a Partnership Firm, the experience and received contractual payments shall be in the name and style of the firm only. The other guidelines at Clause 18 of Part I of 4.1.1 IRSGCC shall be applicable . Note: The partner of a Partnership Firm cannot claim the credentials of Partnership firm to the extent of his share either during the subsistence of the Partnership firm or after its dissolution.
FOLLOWING DOCUMENTS SHALL BE ENCLOSED:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create 4.2.1 liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company 4.2.2 (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iii) copy of PAN number of the Company.
In case of JOINT VENTURE (JV) FIRMS: Clause No.17 of Part-I of IRSGCC with upto date correction slip shall be applicable in all aspects for Participation of Joint Venture[JV] firms in works tenders. JV firm should submit Memorandum of 4.2.3 Understanding[MOU] as per the format attached as annexure to the tender in DOCUMENTS. Submission of all other documents by JV firm / Members of JV should also be as per Cl.No.17.14 of Part-I of IRSGCC.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 4.2.4 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 4.2.5 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Uploading of other relevant documents connected to the tender; such as Declaration regarding employment of Retired Engineer/ Retired Railway officer, NEFT Form, List of Personnel/Organization, List of Plant/machinery, Particulars of works on hand and completed (As per the formats attached in the list of Documents)etc.
Hyderabad Division-Attending to the repairs to the pumping Installation with Lifting and Lowering of submersible pumps over division.
25-REV-26-27-SrDEE-M-HYB~SCR
25-REV-26-27-SrDEE-M-HYB
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.7 L
5 Aug 2026
5 Aug 2026
18 Aug 2026
107 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,33,73,997 | ||
| — | 50.00 | — | — | ||
| Lifting of GI pipe submersible pumps from the existing bores of various capacities Upto 600 Ft depths including transportation of pumps from site to depot. The required tools, Trypod, man power, transportation shall be at the contractor's cost only including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 2,52,450 | |
| — | 50.00 | — | — | ||
| Lowering of GI pipe submersible pumps in the existing bores of various capacities Upto 600 Ft depths including transportation of pumps from depot to site. The required tools, Nipple, Reducers, couplers, PVC & water proof taperolls, Trypod, man power including all connected accessories etc. and transportation shall be at the contractor's cost only as per the direction of site Engineer. | — | — | — | 2,32,250 | |
| — | 300.00 | — | — | ||
| Lifting of GI pipe submersible pumps from the existing bores of various capacities Above 600 Ft depths including transportation of pumps from site to depot. The required tools, Trypod, man power, transportation shall be at the contractor's cost only as per the direction of site Engineer. | — | — | — | 16,800 | |
| — | 300.00 | — | — | ||
| Lowering of GI pipe submersible pumps in the existing bores of various capacities Above 600 Ft depths including transportation of pumps from depot to site. The required tools, Nipple, Reducers, couplers, PVC & water proof taperolls, Trypod, man power including all connected accessories etc., and transportation shall be at the contractor's cost only as per the direction of site Engineer. | — | — | — | 15,000 | |
| — | 240.00 | — | — | ||
| Lifting of submersible pumps from (HDPE Pipe) the existing bores of various capacities Upto 600 Ft depths including transportation of pumps from site to depot. The required tools, Trypod, man power, transportation shall be at the contractor's cost only as per the direction of site Engineer. | — | — | — | 9,42,480 | |
| — | 300.00 | — | — | ||
| Lowering of submersible pumps (HDPE Pipe) in the existing bores of various capacities Upto 600 Ft depths including transportation of pumps from depot to site. The required tools, Nipple, Reducers, couplers, PVC & water proof taperolls, Trypod, man power, transportation shall be at the contractor's cost only including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 10,93,800 | |
| — | 400.00 | — | — | ||
| Lifting of submersible pumps from (HDPE Pipe) the existing bores of various capacities Above 600 Ft depths including transportation of pumps from site to depot. The required tools, Trypod, man power, transportation shall be at the contractor's cost only as per the direction of site Engineer. | — | — | — | 16,400 | |
| — | 500.00 | — | — | ||
| Lowering of submersible pumps (HDPE Pipe) in the existing bores of various capacities Above 600 Ft depths including transportation of pumps from depot to site. The required tools, Nipple, Reducers, couplers, PVC & water proof taperolls, Trypod, man power, transportation shall be at the contractor's cost only including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 18,000 | |
| — | 12.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 7.5HP vertical type energy efficient submersible pump with a total head of 300Mts with a discharge of 30LPM WITH DISCHARGE 50 MM at total head suitable to work on 3-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 6,86,664 | |
| — | 6.00 | — | — | ||
| Supply of 3Ph, 415V, 20HP Open well submersible pump without control panel, outlet delivery size 100mm, Head range: 28 mtrs-52, Star delta connection as per the directions of engineer at site | — | — | — | 5,22,000 | |
| — | 3000.00 | — | — | ||
| Supply and laying of HDPE pipe with required fittings and joints of 40mm outer dia. Manufacturing of PE-100 grade material. The pipe pressure class of PN-16. the pipe should be suitable for drinking/raw water application as per direction of engineer at site. | — | — | — | 4,05,000 | |
| — | 24.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 5HP vertical type energy efficient submersible pump with a total head of 275Mts with a discharge of 20LPM at total head suitable to work on 3-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 11,81,904 | |
| — | 12.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 3HP vertical type energy efficient submersible pump with a total head of 174Mts with a discharge of 20LPM WITH DISCHARGE 40 MM at total head suitable to work on 3-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 3,89,988 | |
| — | 20.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 2HP vertical type energy efficient submersible pump with a total head of 183Mts with a discharge of 20LPM at WITH DISCHARGE 40 MM total head suitable to work on Single-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 5,30,740 | |
| — | 15.00 | — | — | ||
| Single phase starter with dry run protection for 2 HP submersible pumps with suitable Ammeter, Voltmeter, Control cb, run and start capacitors, start/stop push button, off delay timer as per direction of engineer at site | — | — | — | 63,750 | |
| — | 15.00 | — | — | ||
| Supply of stainless steel sand/mud proof submersible pump of 1.5HP vertical type energy efficient submersible pump with a total head of 123Mts with a discharge of 20LPM WITH DISCHARGE 40 MM at total head suitable to work on 1-ph with pump maximum outer dia 98mm as per the directions of engineer at site | — | — | — | 3,87,090 | |
| — | 15.00 | — | — | ||
| Single phase starter with dry run protection for 1.5 HP submersible pumps with suitable Ammeter, Voltmeter, Control cb, run and start capacitors, start/stop push button, off delay timer as per direction of engineer at site | — | — | — | 59,250 | |
| — | 2400.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 4 Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 4,03,200 | |
| — | 2400.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 2.5 Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 3,33,600 | |
| — | 600.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 6 Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 1,74,000 | |
| — | 400.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 10 Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 1,86,000 | |
| — | 40.00 | — | — | ||
| Supply & fixing of 4 No's of 2"x1.5', 6" GI bore cover, 2" GI bend, GI coupler, 2"x3' GI for coupling, suitable capacity nut & bolt the GI/HDPE pipe and pump & connected accessories as per the directions of engineer at site | — | — | — | 98,720 | |
| — | 40.00 | — | — | ||
| Supply & fixing of 4 No's of 1.5"x1.5', 6" GI bore cover, 2" GI bend, GI coupler, 1.5"x3' GI for coupling, suitable capacity nut & bolt the GI/HDPE pipe and pump & connected accessories as per the directions of engineer at site | — | — | — | 83,040 | |
| — | 48.00 | — | — | ||
| Supply & fixing of control panel consisting of DOL starter, single phase preventer with power automatic ON & OFF system, with dry run, pilot lamps, selector switch, Voltmeter, Ammeter in suitable sheet steel box of 16 SWG upto 7.5HP pumps including all connected accessories as per the directions of engineer at site. | — | — | — | 6,78,576 | |
| — | 40.00 | — | — | ||
| Supply, testing & commissioning of Fully automatic Star Delta Starter with wideband coil i-ph preventer, dry run protection & all connected accessories suitable for operation on 415V, 3Ph 50Hz AC supply Relay range 30-50, coil voltage:380V test and Guarantee certificate should be provided at the time of supply, similar to Make: M/s. Havells/L&T/ABB/Siemens as per the direction of Engineer at site (for upto 30HP) | — | — | — | 17,16,120 | |
| — | 20.00 | — | — | ||
| Supply, testing, installation & commissioning of 1HP, 1Ph, 230V mono submersible pump, head 11-14 mtrs, delivery 32/40mm including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 2,09,800 | |
| — | 20.00 | — | — | ||
| Single phase starter with dry run protection for 1/0.5 HP mono submersible pumps with suitable Ammeter, Voltmeter, control cb, run and start capacitors, start/stop push button, off delay timer as per direction of engineer at site | — | — | — | 70,000 | |
| — | 10.00 | — | — | ||
| Supply, testing, installation & commissioning of 0.5HP, 1Ph, 230V mono submersible pump, head 11-14 mtrs, delivery 32/40mm including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 81,200 | |
| — | 15.00 | — | — | ||
| Supply, testing, installation & commissioning 3Ph, 7.5HP mono submersible, 415V, delivery 50mm, head range 30mts-40mts, 800LPM, star delta connection including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 5,97,450 | |
| — | 15.00 | — | — | ||
| Supply, testing, installation & commissioning 3Ph, 10HP mono submersible, 415V, delivery 80 mm, head range 35mts-50mts, 1000LPM, star delta connection including all connected accessories etc. as per the direction of site Engineer. | — | — | — | 8,49,075 | |
| — | 5.00 | — | — | ||
| Supply & fixing of Screw ends type Non-Return Valve, 50mm dia with all the connecting accessories as the direction of the engineer at site. | — | — | — | 21,250 | |
| — | 5.00 | — | — | ||
| Supply & fixing of w ends type Non-Return Valve, 65 mm dia with all the connecting accessories as the direction of the engineer at site. | — | — | — | 38,820 | |
| — | 30.00 | — | — | ||
| Supply & fixing of flange 50 mm, 04 holes along with suitable EPDM rubber gasket with SS fasteners both washers and nut bolts as per the direction of the engineer at site | — | — | — | 27,000 | |
| — | 30.00 | — | — | ||
| Supply & fixing of flange 65 mm, 04 holes along with suitable EPDM rubber gasket with SS fasteners both washers and nut bolts as per the direction of the engineer at site | — | — | — | 34,500 | |
| — | 30.00 | — | — | ||
| Supply & fixing of flange 80 mm, 04 holes along with suitable EPDM rubber gasket with SS fasteners both washers and nut bolts as per the direction of the engineer at site | — | — | — | 37,500 | |
| — | 40.00 | — | — | ||
| Supply & fixing of flange 100 mm, 04 holes along with suitable EPDM rubber gasket with SS fasteners both washers and nut bolts as per the direction of the engineer at site | — | — | — | 50,000 | |
| — | 20.00 | — | — | ||
| Supply & fixing of long bent 90 degrees 50 mm both side threading along with 02 nos sockets as per the direction of the engineer at site | — | — | — | 8,000 | |
| — | 20.00 | — | — | ||
| Supply & fixing of long bent 90 degrees 65 mm both side threading along with 02 nos sockets as per the direction of the engineer at site | — | — | — | 10,000 | |
| — | 20.00 | — | — | ||
| Supply & fixing of long bent 90 degrees 80 mm both side threading along with 02 nos sockets as per the direction of the engineer at site | — | — | — | 16,280 | |
| — | 10.00 | — | — | ||
| Supply & fixing of long bent 90 degrees 100 mm both side threading along with 02 nos sockets as per the direction of the engineer at site | — | — | — | 14,280 | |
| — | 20.00 | — | — | ||
| Supply & fixing of gland rope 8 mm as per the direction of the engineer at site | — | — | — | 7,080 | |
| — | 15.00 | — | — | ||
| Supply & fixing of gland rope 10 mm as per the direction of the engineer at site | — | — | — | 7,080 | |
| — | 10.00 | — | — | ||
| Supply & fixing of gland rope 12 mm as per the direction of the engineer at site | — | — | — | 5,900 | |
| — | 20.00 | — | — | ||
| Supply & fixing of EPDM rubber sheet hardness 60-65 and 5 mm thickness as per the direction of the engineer at site | — | — | — | 45,260 | |
| — | 20.00 | — | — | ||
| Supply & fixing of EPDM rubber sheet hardness 60-65 and 4 mm thickness as per the direction of the engineer at site | — | — | — | 36,200 | |
| — | 10.00 | — | — | ||
| Attention of borewell pump struck up due to mud and tree roots 50 mm GI rotary as per the direction of the engineer at site | — | — | — | 1,50,000 | |
| — | 10.00 | — | — | ||
| Attention of borewell pump struck up due to mud and tree roots 40 mm GI rotary as per the direction of the engineer at site | — | — | — | 1,25,000 | |
| — | 10.00 | — | — | ||
| Flushing of borewell for improving circulation | — | — | — | 2,15,000 | |
| — | 25.00 | — | — | ||
| Brick work around bore well 1x1x2 ft (as a protection from foreign objects such as waste plastic/clothes etc.) as per the direction of the engineer at site | — | — | — | 1,80,000 | |
| — | 30.00 | — | — | ||
| Supply, laying & fixing of casing pipe PVC 150mm | — | — | — | 33,750 | |
| — | 10.00 | — | — | ||
| Supply & fixing of SS Nipple 32mm x 25 inch | — | — | — | 4,500 | |
| — | 10.00 | — | — | ||
| Supply & fixing of SS Nipple 40mm x 25 inch | — | — | — | 5,000 | |
| — | 10.00 | — | — | ||
| Supply & fixing of SS Nipple 50mm x 25 inch | — | — | — | 7,250 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NEFTForm.pdf
ATTACHMENT
ExperianceCertificate.pdf
ATTACHMENT
GCC_April-2022_2022_New.pdf
ATTACHMENT
CorrectionSlip2022_CE-I_CT_GCC-2022Policy14.07.2022_1.pdf
ATTACHMENT
ACS-3toGCCApril.2022RBCE_CE-I-CT2023_04_26.pdf
ATTACHMENT
ACS-2toGCC-2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
GCCACS11dt.13.03.2026.pdf
ATTACHMENT
ApprovedTB25-26-27LL.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].