Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.3 LAccepted-Finance | 1 | Accepted-Finance Single tender found ok |
Tender Value
₹3.1 L
EMD Value
₹6,210
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Civil
BSNL Civil Div, 2nd Floor, BSNL Bhawan, PanBazar Guwahati
Repair and Maintenance works of Qtr No 5 Ty I block II QtrNo 12Ty II block II Qtr No 2 5 and 10Ty II block III Qtr No 12 and 13Ty III block III at wireless compound Dispur Guwahati
2023_BSNL_144178_1
eNIT77/BSNL/CDGH/2022-23
Open Tender
Civil Works - Buildings
Item Rate
90 days
Dispur
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
AO Cash Office of GMTD BSNL Kamrup SSA Guwahati
₹6,210
15 Feb 2023
6 Feb 2023
15 Feb 2023
6 Feb 2023
13 Feb 2023
6 Feb 2023
Amount
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
(a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
(a) Kiln seasoned and chemically treated hollock wood or Ist class local hard wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (a) Kiln seasoned and chemically treated hollock wood or Ist class local hard wood
(i) 30 mm thick shutters
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
(a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.
An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. a) 30 mm thick plain PVC door shutters.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.
(a) New work (two or more coats) over and including water thinnable priming coat with cement primer.
Distempering with 1st quality acrylic distember (Ready mix)having VOC content less than 50 grams/ litre of approved brandand manufacture to give an even shade :
(a) Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
(a)Two or more coats on new work.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
(a) One or more coats on old work.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
(a) With cement mortar 1:4 (1 cement : 4 fine sand).
Renewing glass panes, with putty or beeding and nails wherever necessary including replacing with new beeding if necessary racking out the old putty:
(a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:
(a) Of area 3 sq. metres and below
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
(a) 10 litre capacity - White
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
(a) Flat back wash basin of size 550x400 mm.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Semi rigid pipe
(i) 32 mm dia
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
(a) 20 mm nominal outer dia. Pipes.
Providing and fixing uplasticised PVC connection pipe with brass unions :
a)45 cm length i) 15 mm nominal bore
Providing and fixing PTMT bib cock / stop cock of approved quality and colour.
(a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour .
(a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
Repairs to PVC flushing tank by replacing the damaged portion of kit, changeof washer etc and washing and refixing the same to work as new all complete as directed by the Engineer in charge
Easining of door windows shutter by by taking it out if necessary and oiling the hinges and plaining the edges as necessary including minor repairs by use of cleat angle etc to make doors and window shutters easily operable complete as per direction of Engineer-in-charge. ( payment will be made on shutter basis)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .