REPAIR TO JOINERY, FALSE CEILING, TILING, SANITARY FITTINGS ETC AT NEW DRDE AND REPAIR/MAINT OF ALL TYPES OF PUMPING SETS/CONTROL VALVES AND MISC WORKS AT DRDE GWALIOR UNDER GE I RND DELHI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each and making good the disturbed surface complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exceeding 4 sqm each and making good the disturbed surface complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Cutting holes in brick walls built in cement mortar exc. half brick but not exc. one brick in for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and finishing the surface to match with existing surface complete all as specified and directed.

S&F Pressed steel frames for doors 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and filling hollow portion with PCC 1:3:6 type C-1 (20mm graded aggregate) complete all as specified and directed.

S&F Pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and filling hollow portion with PCC 1:3:6 type C-1 (20mm graded aggregate) complete all as specified and directed.

S&F Second class hardwood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials of any description and girth such as ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.

S&F Mild steel hold fasts of ms flat/ angle iron confirming to Fe 290 Gde 165 complete all as specified and directed.

M&L Preparing surfaces of small steel or iron articles of any description and girth such as holdfasts etc., area n exc 0.1 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.

S&F 35mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) partially panelled and partially glazed or gauged shutters, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) plain framed panelled shutter (two panel) with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rails and stiles as per IS : 1003 (Part-I) complete all as specified and directed.

S&F 30mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (b) complete all as specified and directed.

M&L for praparation of new wood and wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed.

S&F Powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and directed.

S&F 5.5mm thick sheet glass of any plain or tinted, ordinary quality and glazing with exising snap beading and rubber gasket in aluminium frames complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement complete all as specified and directed.

S&F18/19 mm thick pre laminated particle board interior grade prelaminated one side with decorative choice lamination provided with 6mm thick (width equal to thickness of board) polished teakwood lipping all around, fixed to timber frame work/ steel frame work as in cup board shutter/ shelves complete all as specified and directed.

S&F 18 mm thick wood plastic composite (WPC) panel with suitable pins, screws and adhesive in cabinets body, shutters and shelves complete all as specified and directed.

S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters complete all as specified and directed.

S&F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position complete all as specified and directed.

S&F stainless steel cabinet handles 75mm size decorative type complete all as specified and directed.

S&F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter complete all as specified and directed.

S&F 100 mm size aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 100mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F 75mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt extruded section, 200 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt extruded section, 100 mm long complete all as specified and directed.

S&F Extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified and directed.

S&F Extruded anodised aluminium alloy handles fabricated type 100mm long grip complete all as specified and directed.

S&F Aluminium alloy anodized hooks and eye 150mm size complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Anodised aluminium alloy body door stopper and rubber shoe, overall length of cover plate 140mm complete all as specified and directed.

S&F in repir Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm repairs in wooden or metal frames complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and directed.

S&F 3 mm thick figured glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and directed.

S&F in repair 0.80mm thick plain, galvanised, mild steel sheeting fixed in repairs on crumple joints with screws (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling mild steel and structural work including grills, guard bars, doors and gates etc complete all as specified and directed.

M&L for Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, framed and hung as gates, including pintle hinges, stops hand made sliding bolts etc., ladders framed balusters walk ways railings, framework of water tanks and similar work confoRMing to Fe 290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling leaves of main entrance steel gates of DRDE new campus technical area including roller guide rail/ channel, adjusing height by relocating hinging/ locking arrangement, repairing worn out and corroded parts of gate and guide rail/ channel by welding, refixing the gate and embedding roller guide rail/ channel in cement concrete 1:1½:3 complete all as specified and directed.

Repairing and easing of rolling shutter push and pull (manual type), any size without taking down of rolling shutter but by opening top cover and refixing, cleaning guide channels, replacement of rusted partsincluding welding, grinding; greasing and oiling etc. for smooth operation and painting both sides and top cover with one coat of synthetic enamel paint after preperation of surface complete all as specified and directed.

Repairing and easing of collapsible gate, any size without taking down, cleaning guide channels, replacement of rusted parts including welding, grinding, greasing and oiling etc. for smooth operation and appling one coat os synthetic enamel paint complete all as specified and directed. Note for 48 & 49 : Any unserviceable part to be replaced shall demed to be in included in quoted rates.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (40mm graded aggregate) in sub base of floor complete all as specified and directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (20mm graded aggregate) in floors complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Non- skid joint free ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Non-skid joint free ceramic tiles skirting cut out of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces, area of each tile exc 0.08 sqm but not exc 0.16 sqm, 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Vitrified ceramic light shade coloured tiles 8 to 9 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified ceramic light shade coloured tiles skirting cut out of 8 to 9 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps and other similar situations complete all as specified and directed.

M&L for Chequered cement concrete tiles in grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 20mm thick screed bed in cement mortar 1:6, set jointed and pointed in neat cement slurry complete all as specified and directed.

Dismantling interlocking paver blocks of any description, laid dry complete all as specified and directed.

Providing and laying 60mm thick factory made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

Laying only 60mm thick paver blocks any description, by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

Providing and laying factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp or insulation etc) or insulation boards/ slabs/ blankets, any thickness, including framework of any description complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the inteRMediate channel at 457 mm centre to centre complete all as specified and directed.

S&F PVC coated gypsum ceiling board/ tiles for insulation and acoustic purpose 60x60 cm in size fixed in position complete all as specified and directed.

Cutting of berms and clearance of rubbish, debris and organic deposits by surface excavation not exceeding 30 cm deep including cutting and uprooting of shrubs and bushes and removing and depositing where directed out of MoD land at a distance not exceeding 1 km complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel sheet 1mm thick including waste coupling and washers and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F 32mm dia waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface complete all as specified and directed.

S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer complete all as specified and directed.

S&F in repair 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, streched length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repair 40mm dia ribbed PVC waste drain pipe for sink, streched length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC complete all as specified and directed.

S&F in repair PVC cover for PVC water storage tank covers upto 1000 litres capacity fixed in repair complete all as specified and directed.

Taking down PVC soil, waste and rainwater pipes (any size or pattern), including all fittings, shoes, bends etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece provided with access door, single (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece provided with access door, (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

PVC (SWR) floor trap plain with grating including skirting with solvent cement 75mm dia of outlet, fixed in repairs complete all as specified and directed.

Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up down steel tubing and connections 25mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Fixing only 15mm bore galvanised steel water tubing with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only 20mm bore galvanised steel water tubing with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only 25mm bore galvanised steel water tubing with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore galvanised steel water tubing medium grade with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore galvanised steel water tubing medium grade with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F 25mm bore galvanised steel water tubing medium grade with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm dia chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick plaster on concrete/brick masonry surfaces in CM 1:4 finished even and fair w/o using extra cement complete all as specified and directed.

M &L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:4, including finishing with sagol finish not less than 1mm thick even & fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over wall care putty of 2mm thick over one coat of primer on walls complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of two coats of weather proof paint over a coat of primer complete all as specified and as directed.

Taking down aluminium door shutter exc 1.5 Sqm but not exc 4 Sqm and refixing in the same opening after repairs/refitting the door shutter including all screws and cleats and bolts complete all as specified and as directed.

Taking down aluminium Sliding window shutter not exc 1.5 Sqm and refixing in the same opening after repairs/refiiting the window shutter included all screws and cleats, Rollers, handles complete all as specified and as directed complete all as specified and as directed.

M&L for taking down aluminium Sliding window shutter not exc 1.5 Sqm and refixing in the same opening after repairs/refixing the window shutter included all screws and cleats, Rollers, handles complete all as specified and directed.

M&L for Post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L for Post construction Anti TeRMite Treatment along the Internal wall below concrete or masonry using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30 mm flaps complete all as specified and directed.

Disconnecting the existing non functional submersible pump sets, dismantling from rising mains, removing and lifting out submersible pump sets of 7.5 HP to 20 HP capacity in any position along with existing column pipe 80 mm dia any type and submersible cable of any size from bore well 150/200mm dia (approx 70 mtr depth of pupmpset from GL) complete all as specified and directed.

Lowering down the serviceable submersible pump sets of any description and in any position and in any capacity in bore well along with the column pipe 80mm dia up to 70 mtr deep and submersible cable of any size complete all as directed and making necessary electric connection, connect with rising main and testing complete after lowering complete all as specified and directed.

Dismantling and strip opening of submersible pump and motor 15 HP to 20 HP, 3 phase, 415 volts, 50hz AC Supply of any description and in any position for servicing/overhauling, cleaning, greasing, removing and replacement of defective unserviceable parts with new parts, reassembling the pump and motor with proper alignment of both pump and motor, fixing in position connecting to existing system and testing at site of full load to meet the diesier requirment complete all as specified and directed.

All as per ser item No. 120.00 & 121.00 above but 10.5 HP to 12.5 HP, 3 phase, 415 volts, 50hz AC Supply (a) The replacement of defective non functional parts shall be measured and paid for separately under respective items BOQ. (b) Burnt out winding of motor shall be measured and paid seperately. (c) The rate of above item shall include necesaary transportation to & pro workshop if any. (d) Lifting and lowering shlll be measured under respective items of BOQ.

Supply only Gun metal bush upper and lower.

Supply only Brass thrust plate

Supply only C I thrust bearing

Supply only CI thrust casing

Supply only Water seal

Supply only CI lower housing of shaft

Supply only CI upper housing of shaft

Supply only Rotor sleeve

Supply only coupling set with key of stainless steel

Supply only discharge outlet CI

Supply only stage casing CI

Supply only gun metal sand guard

Supply only gun metal neck ring

Supply only gun metal impeller

Supply only gun metal body bush

Supply only CI suction housing

Supply only SS distance bush

Supply only key for coupling.

Supply only cable seal

Supply only upper flange with studs & nuts

Supply only lower flange with studs & nuts

Supply only Connection piece with nuts and bolts

Supply only Gun metal seal bush.

S&F HS shaft with key for the submersible pumps of any description and capacity having 7 to 10 stages 10.5 hp to 20 hp complete all as specified and as directed.

S&F in repair for rewinding of submersible motor 15 HP to 20 HP, 3 Phase 415 V, AC 50 Hz with proper size PVC insulated copper winding wire of existing size and approved make after taking down burnt winding, cleaning of slots with CTC solution, fixing in position and testing complete all as specified and as directed.

All as per ser item No. 146.00 above but 10.5 HP to 12.5 HP, 3 Phase 415 V, AC 50 Hz.

All as per ser item No. 146.00 above but 7.5 HP, 3 Phase 415V AC 50 Hz.

Disconnectiong existing defective centrifugal/booster pump set with electric motor of any make of 10 HP capacity from electric mains isolating the naked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump etc and carrying the servicing of defective pump unit at any workshop, dismantling for grinding, machining and polishing to retrieved pump shaft, replacement of impellor and GM bushes, space bushes, replacement of rubber gasket and carrying back to the site and re-assembling of suction and delivery pipe line including replacement of wornout nut, bolts, washers etc complete all as specified and as directed by Engr-in-Charge. Note: Replacement of defective parts shall be measured and paid separately under relevant item.

M&L for replacement of existing Ball bearing of the electric motor of capacity 10 HP complete all as specified and directed. Make: SKF/NBC equipment as approved by GE.

M&L for replacement of CI impellor as per existing size for 10 HP Pump complete all as specified and directed.

M&L Rewinding of electric motor while taking out all the burnt stator winding coils and preparing the stator surface, rewindig the stator with suitable gauge of super enamelled copper wire with insulating materials, sleeves, polishing, varnishing etc including connection of leads with suitable size copper lead wire upto teRMinal plate of the motor for the capacity of Induction Motor, 3 Phase complete all as specified and directed.

S&F for heavy duty GI Bend suitable for 80 mm bore column pipe, one side threaded for socket & other side drilled for nut bolts for flange & having arrangement of mounting pressure gauge, including flange & socket complete all as specified and directed.

Labour for cutting of CI/GI pipe (2 cut) in position for repairing/ reducting to required length for insertion of new tees, branches etc of size 80mm dia bore complete all as specified and directed.

Servicing of LT panels/ automatic starters complete including minor replacement of burnt internal wiring, thimbles/ lugs, replacement of burnt bolts, nuts and washers and major replacement of accessories like MCCBs, MCBs, Changeover switches, Power contactor etc. NOTE : 1. Minor accessories shall be included in the item rate. 2. Major accessories shall be measured and paid separately under relevant item

S&F in replacement of Digital type voltmeter 0-500 v square type 96mmx96mm complete all as specified & as directed.

S&F in Replacement of Digital type Ammeter 0-30 Amps square type 96mmx96mm with required size CTs complete all as specified & as directed.

S&F in replacement On Load Change over switch in sheet metal enclosur of 100 Amps, 4 pole, 415 volts complete all as specified and directed.

S&F 3 pole MCCB 200 amp 415 v adjustable type with breaking capacity 36 KA complete all as specified and directed.

S&F in replacement of 3 pole MCCB 125 amp 415 v adjustable type with breaking capacity 36 KA complete all as specified and directed.

S&F in repair power contactors AC-3 rating 40 Amps, 415 Volts complete all as specified and directed. Make: Cat : MNX 40 of Make - L&T or equivalent in Legrand/ havells

S&F Bi metalic over load relay for automatic starters to operate 20 HP pump set of relay range 40-50Amp complete all as specified and directed.

Supply and fixing Star delta timer range 0-30 Sec, 250V, complete all as specified and directed. Make : L& T / C&S /Legrand or equivalent

Supply and fixing Star delta timer range 0-30 Sec, 415V, complete all as specified and directed. Make : Make : L& T / C&S /Legrand or equivalent

S&F in replacement of fully automatic star- delta motor starters oil merged suitable for capacity 10.5HP to 20 HP motor with overload, over current, overheat etc protection system complete all as specified and directed. Make :Bentex or equivlant as approved by GE.

M&L in repair for submersible cable joint for 3 core 6 sq mm/10 sq mm with and including waterproof compound and testing complete all as specified and directed.

S&F in repair stainless steel spindle with gun metal nuts suitable for 150 mm dia sluice valve

All as per item No. 169.00 here- in-before but 100mm dia sluice valve

All as per item No 169.00 here- in-before but 80mm dia sluice valve

Taking out unservicable brass/ steel spindle of size upto 150 mm dia by opening top cover of sluice valve including taking to the workshop for the required leath work, brass welding, rebuilding threads etc as required and refix the same for smooth functioning of water supply complete all as specified and as directed

S&F leather packing 6mm thick complete all as directed and specified.

M&L for Replacement of cast iron 80mm bore sluice valve PN 1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and and directed

All as per item No 174.00 here- in-before but 100mm bore pipe

All as per item No 174.00 here- in-before but 150mm bore pipe

S&F GI tubing 50 mm bore galvanised medium grade of any length including all fitting such as bend , elbow ,tee and union laid in trenches/floor with required cutting , threading etc including taking out old unserviceable GI pipe complete all as specified and directed.

All as per item No 177.00 here- in-before but 80mm bore pipe

All as per item No 177.00 here- in-before but 100mm bore pipe

Excavation in trenches not exceeding 1.5 m deep & not exceeding 1.5 m wide and getting out in soft / loose soil including levelling and ramming complete all as specified and as directed.

Returning, refilling in trenches soft/loose soils, including spreading levelling & well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removal of excavated surplus soil to a distance n.exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

M&L in replacement MS frame including 6 mm thick MS sheet cover with locking arrangement, MS frame made out of 40 x 40 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of metal primer incl nut bolts, washer, welding, bending, drilling holes for bolts in any shape or size as indicated and directed complete.

M&L for Construction of fire fighting post of height 3.5 feet x length 6 feet x width 3 feet made out of MS angle 40 x 40 x 6 mm and MS sheet two coats of syntheic enamel paint of tint RO Red over a coat of red oxide primer duly painted with PO red enamel and construction of PCC foundation for fire fighting including diswmantling old post.

Supply installation in repair bucket made out of MS sheet of capacity 9 ltr with carrying handle at bottom of the bucket each for fire fighting point duly painted with two coats of PO office red enamel over a coat of red oxide primer, complete all as specified and directed.

Supply and lying in repair of rubber mat of size 1 M x 2 M , 19 mm thick complete all as specified and directed.

Supply installation in repair ABC type fire Extinguisher of cap 9 ltr (ISI marked) with all accessories complete all as specified and directed.

Supply and installation in repair wooden made duly painted first aid box in built hanging and locking arrangement with all necessary first aid medicines material complete all as specified and directed.

M&L for re-threading of GI column pipe 80mm dia 3m long including cleaning, finishing complete all as specified and as directed.

S&F in repair of PVC insulated Submersible 3 core copper multi standard flat cable 6 sq mm 1100 Volt complete all as specified and directed.

S&F in repair of PVC insulated Submersible 3 core copper multi standard flat cable 10 sq mm 1100 Volt complete all as specified and directed.

S&F in replacement LED Aviation obstruction light Die-cast aluminum housing with Red polycarbonate dome having IP -65, 240 V for Overhead Water storage tank or reservoir over the height of 1.5 mtr above the top of Tank including with fixing arrangement complete all as specified and directed. Cat Part No. BGAV 302 LED of Bajaj or equivalent make in PHILIPS/Orient Electric.

S&F single door MCB DB 2 way including MCB SP 10 AMP - 01 No complete including necessary electrical connection for aviation light, complete all as specified and directed.

S&F on surface wheather proof service wire connection of, single strand 1100 volt size 6 Sqmm 2 core for aviation light by mean of clips/ saddling complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 32 x 6 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following as shown in electrical plate No. 3 including testing on completion:-

M & L for earth continuity conductor in replacement fixed to wall or buried in ground or in any other situation with GI strips 25 x 3.15 mm, complete all as specified and directed .

M&L for PCC 1:4:8, Type D-2 using 40mm graded aggregate for repair to in footpath for borewells, pump houses etc including prepration of old surface all as specified and directed.

Supply & Fixing in replacement, retro reflective installation board made out of acrylic sheet, size 1.2 x 1.0 Mtr. Writing with computer graphic marking, size of letter not more than 50 mm in length with approved white letter writing on blue back and border of 10mm all around including necessary grouting the installation board with PCC 1:2:4 with 20mm graded stone aggregate upto the depth of not exc. 50mm from ground level and to the ground with angle iron of size 40x40x6mm complete with necessary frame work, welding, bending etccomplete all as specified and as directed.

M&L for rubber gasket/tightening joints for 100mm dia CI pipes complete all as specified and as directed.

Surface excavation or surface dressing in hard/dense soil, not exceeding average 15cm deep for cleaning the area by cutting the unwanted bushes/vegitation growth in and around the area of installations/around the valve pit chamber/along the pipe line routes if reqd etc, all as specified and as directed.

Supply and fixing in repair add on aux contact for existing MNX contactor complete all as specified and directed. Make - L&T/legrand/Schneider

Supply and installation of Receptacle power free automatic water sanitizer/conditioning treatment station with prportional dosing arrangement Stequa Dosing System, Model ADS – PRO (previously Altoch Dosing System) including to provide stequa dosing 411 AE refill (set of 25 piece) for dosing system having following specifiecation :- Chlorine tablets contained in plastic cylindrical sealed disposable sanitizer refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through recommended dosing system, Replacement induction visual & weight variation, water contant orifice design sealed when dry, exposed upon immersion, Operation type. Non contact, non inhalatory, Cylinder dia 2.5 inches + 0.5 inches, Cylinder height Minimum 10.0 inches within permissible limits of make Declibac technologies Pvt Ltd complete all as specified and directed (Model - STEQUA 411 AE REFILL with following arrangements :-

(a) i. Water Inlet Regulator ii. Overflow Vent iii. Water Outlet Regulator with non-return valve (for standalone gravity flow) iv. Water Outlet Regulator (for offline automated gravity flow) v. Drain valve vi. Fluid Level controller vii. Sludge Level Guage viii. Station Base Assembly with Station Base Buffer ix. Station Hood Assembly with multi-cavity arrangement (13) x. Station Holding Assembly xi. Material of construction: Non-metallic theRMoplastic xii. Maximum Temperature: 45°C xiii. Capacity: 100 litres xiv. Shape: Cylindrical

b) Custom cover for power-free automatic water sanitiser / conditioning treatment station with proportional dosing arrangement with following attachments: i. Refill Cavity Lids (13) ii. In-built Level Switch & Processor iii. ½ inch Processor Outlet & Processor Inlet connections iv. Flexible Connecting Duct v. Material of construction: Non-metallic vi. Maximum Temperature: 45°C vii. Shape: Circular c) Additional Fittings: i. 6metre Suction Tubing ii. PVC Ball Valve iii. Plastic check valve iv. Hose nipple

GUPTA ENGINEERING WORKS

M/S J P ENTERPRISES