Cation Exchange Resin-IS:7330 (Q3)

Cation Exchange Resin-IS:7330 (Q3)

Anion Exchange Resin-IS:7330 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Cation Exchange Resin-IS:7330 Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/5963334 Dated : 11-04-2025 Bid Document 1/12 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 24072 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 4 (a). EMD EXEMPTION: The bidder seeking EMD exemption

must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category

only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). EMD & Performance security should be in favour of Beneficiary

wherever it is applicable.

Beneficiary : SITE DIRECTOR BOISAR MAHARASHTRA

Department of Atomic Energy

NUCLEAR POWER CORPORATION OF INDIA LIMITED

PMO (R. S. Sawant) Reserved for Make In India products Reserved for Make In India products Yes MSE Purchase Preference MSE Purchase Preference Yes 2/12 1. Bid reserved for Make In India products: : Procurement under this bid is reserved for purchase from Class 1 local supplier as defined in public procurement (Preference to Make in India)

Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. However

eligible micro and small enterprises will be allowed to participate. The minimum local content to qualify as a class 1 local supplier is denoted in the bid document. All bidders must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid

failing which the bid is liable to be rejected. In case the bid value is more than Rs 10 Crore

the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor

if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020 . In case Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid

the same will get precedence over this clause. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order

2012 dated 23.03.2012 issued by Ministry of Micro

Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference

the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services

the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted

while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy

such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order

2012 and Public Procurement (Preference to Make in India) Order

2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over

Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. Excel Upload Required : Breakup for GST - 1739792197.xlsx Cation Exchange Resin-IS:7330 ( 6000 pieces ) (Minimum 60% Local Content required for qualifying as Class 1 Local Supplier) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Physical and chemical Properties Total exchange Capacity (min eq/L.min): 1.8

2 Uniform coefficient(max) 1.2

1.7 Particle diameter 0.4

0.45

0.5

0.65

1.0 (millimeter) Moisture holding capacity in % 48-55

46-52 Matrix Divinylebenzen Copolymer 3/12 Packaging Pakaging size 25.0 - 200.0 Or higher (liter) Packaging HDPE bad Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Cation Exchange Resin-IS:7330 ( 6000 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) ((1) Our requirement is Moisture content (%): 40-55

(2) Particle/Bead (min 94%) size (mm): 0.3 - 1.2

(3) Effective Size (mm): 0.40 - 0.65 Noted

agreed & quoted accordingly. (1) Our requirement is Total exchange Capacity (meq/ml): 1.8 (Min) wet resin in Na + Form

(2) Fines content (%) : 1.0 (Max) passing through 300 micro sieve Noted

agreed & quoted accordingly. (1) Uniformity Co-efficient: 1.8 (Max)

(2) Bead Strength (g/bead) : Not less than 500 (average)

Noted

agreed & quoted accordingly. Bidder shall note the Packaging & Colour Coding on packaging requirement alongwith Inspection & Acceptance criteria mentioned under Annexure-C uploaded under Buyer specific Bid uploaded ATC document below and submit acceptance to the same. Noted & agreed.