CLEANING OF SEWAGE LINES, SEPTIC TANKS, MANHOLES AND REAPIRS TO GATES, CERTAIN FLOOR/WALL TILES AND CHEQURED, INTERLOCKING TILES ETC FOR CE RND DMDE AREAS UNDER AGE B/R -II SECUNDRABAD

Amount

Cleaning of Septic tanks of 150 users capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as directed.

M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/disludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed by Engr-in-Charge. Tentative quantities required to be cleaned per month shall be as under:- (a) 100mm bore sewage line -500 Metre (b) 150mm bore sewage line -1500 Metre (c) 200mm bore sewage line -1000 Metre (d) Manholes of any size - 550 Nos (e) Trap/water closet/Urinals -650 Nos The above mentioned quantities may be varied at the descretion of Engineer- in -charge as per requirement and nothing extra shall be claimed on this account.

Note :- (i) Adequate precautions and safely measures shall be taken while working under foul conditions and cost for the same shall be deemed to be included in the quoted rate. (ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor.

Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed

Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed.

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary from work and demolition of concrete. complete all as directed.

M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed.

Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as directed.

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs, set in cement mortar (1:4) for manholes including necessary including demolition of old broken RCC cover, slabs and form work complete all as directed. Note:- Reinforcement required will be measured & paid for separately.

S&F TMT bars 10 mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.90 mm dia complete all as directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including demolition of old brick masonary complete all as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition of old brick masonary complete complete all as specified and directed.

M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition of old brick masonary complete complete all as specified and directed.

M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains.including demolition of concrete, complete all as directed.

M&L in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L in repairs for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer complete all as specified and as directed by Eng-in-charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and including dismantling of old tiles complete all as specified.

M&L for light coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor including 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed

All as per srl item No.26 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed.

S&F in repairs venetian blinds vertical type 100mm width with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. Make : VISTA/ LEVADOR/ AMAR

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one SS wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified. incl dismantling of old windows any descriptions and any size and make good existing surface.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX) Note:- i) Paint work should be carried out by Authorised applicator with brand waranty. ii) The work carryout upto 4 story bldgs and rates are incl necessory eqpt and Scaffolding.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions one coats of putty 1.5mm thick to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT Note:- The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera

S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed. Make:Parryware / HIindware/ Cera

S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make:Parryware/ Hindware/ Cera

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe.

S&F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or equivalent

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked

S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked

S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked

S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. ISI marked

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked.

S&F in repair sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs 15-mm bore bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, and screwed for iron pipe complete all as directed.

Supply and fixing in repairs 15mm & 20mm GI small fittings such as socket, elbow, nipple, tee, union, Double Nippel etc for galvanised iron 15mm & 20 mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing upto 1.5m included in rates.

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed.

S&F in repairs 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect and Incl dissmantling existing glass door any size as specified & directed. Make : Modiguard/ saint Gobain

S&F 10 mm thick Toughened frosted/tinted glass partition etc complete in all respect and Incl dissmantling existing glass partition any size as specified & directed. Make : Modiguard/ saint Gobain

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as speicified and directed. Make : Godrej/Ozone

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as speicified and directed.

SUN LIGHT HOUSE (BID ID -3143654)

SRI SAI ENTERPRISES (BID ID -3141806)

MOHAMMED GHOUSE (BID ID -3144307)

Anjana corporation (BID ID -3144402)

KIRAN CONSTRUCTIONS (BID ID -3142767)

sandhya enterprises (BID ID -3143750)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3144357)