Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance JABALPUR | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
11 Nov 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Office of Ex En PHE Division Reasi
Office of Ex En PHE Division Reasi
Providing, installation testing and commissioning of electro mechanical components and other allied works under WSS Kolsar Jerri
2023_PHE_234595_1
E-NIT no PHER/80 of 2023-24
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
120 days
Reasi
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
2 Dec 2023
21 Oct 2023
13 Nov 2023
21 Oct 2023
11 Nov 2023
21 Oct 2023
Amount
Providing, installation testing and commissioning of H.C. Pump of 5000 GPH X 300m ( 2 nos )Head coupled with suitable induction motor. The specification of motor should be 2900-3000 rpm, 50 HZ,, TEFC Cooled. The pumping machinery should confirm to relevant ISO standard with all latest amendments. INSTALLATION of Pump sets:- Foundation Blocks ( 2 NO) :-Construction of R.C.C. foundation block – 2No of required size as per base frame of pumpste inside the pump room at pump room for installation of pumping units by excavation of soil to finish with required dimensions of the pit, removal of excavated material and disposing off the same outside the pump room at suitable place as per site conditions. The job also includes demolishing the existing flooring of requisite area with jack hammer, high carbon steel chisels and sledge hammer, providing and laying of crushed stones 40 mm and ramming properly. Laying of one layer of 1:3:6 concrete mass 30 mm thick. Fabrication& Providing of steel foundation bolts of required dia 600 mm in length – 6 Nos. having threaded portion at one end and an anchor at the other end. Also providing fabrication of steel hexagonal nuts and washers for the foundation bolts. Fabrication of steel reinforced cuboidal structure of requisite size for the foundation block out of T.M.T steel bars 10 mm thick by way of cutting, the steel bars of required length and placing in position at proper spacing longitudinally and transversally and binding with black annealed wire them properly so that internal cube meshes of 6” size are formed. Job includes fabrication charges as well hirer charges of welding set. Lowering the reinforced/cuboidal steel structure in the pit and then placing the base frame of the pump over the steel reinforced cuboidal steel structure making proper leveling and alignment of the base frame over the cuboidal steel structure. Placing the threaded end of the foundation bolts in upright vertical position at required distance in position and in alignment after lowering through holes of base frame. Binding of the foundation bolts with the steel mesh of cuboidal steel reinforced structure at various spots and then fastening the base frame over the reinforced steel structure by tightening the nuts of the foundation bolts, simultaneously ensuring proper leveling and alignment of the base frame over the reinforced cuboidal steel structure. The job further includes laying of M-20 grade cement concrete block including steel reinforcement, machine mixing laying and compaction with vibrator using stone aggregate 1:11/2:3 mix (1 cement 11/2 coarse sand and 3 graded stone mixture of specified grade of nominal size 20mm) including binding chemical up to top level from inside the base frame and up to the bottom line of base frame from outside of the base frame – also plastering the exposed surface of block. Construction of drain for draining out the occasional leakage water of pump. Also repairing of damaged flooring wherever required with cement concrete mixture using chemical bonding material for smooth finish of the flooring of the pump room, and proper curing of cement works for proper strength for a minimum of 07 days. The whole job also includes cost of material and carriage charges for all material from various sources by Mech. Transport as well as head load, hire charges of shuttering material, vibrator and concrete mixture and welding set, POL for vibrator and concrete mixture, labour charges for laying of foundation block, including skilled and semi-skilled workers deployed for execution of job. Carriage:-Carriage of pumping machinery (pump, motor, coupling set, base frame to site of work by Mech. Transportation and Head Load up to Pump Room. The job also includes dismantling the pumping unit, unfastening the coupling bolts, nuts, bolts of the base frame for separating each component viz. motor pump, coupling set, base frame etc., for their proper handling and carriage. Installation (2 nos ):-Installation of new 5000 GPH X 300m. Head H.C. pump set on the foundation blocks at pump room by way of providing and fitting of bolts with nuts and washers for fitting of new pump and motor on each base frame, Also leveling of pump and motor in proper alignment with each other. Tightening the nut bolts of the base frame. Providing and fitting graphite gland packing with fitting of pump glands. Coupling the pump and motor by way of fixing of coupling bolts. Job includes cost of graphite gland packing, nut bolts of the base frame and labour charges for skilled and semiskilled workers deployed for execution of job. Delivery manifold( 1 Nos):-:-Fabrication of delivery manifold out of 150 mm M.S. pipe 10-15 feet length by plugging both the ends by welding 1 No. blind flange at each end and placing in position and required height outside the pump room and anchoring by laying of RCC Cubical blocks 2 nos. Of required size over the manifold with required foundation of blocks beneath the manifolds and curing properly the RCC cubical blocks for proper strength and finally the delivery manifold to be connected with the Rising main by creating a hole of required size in the delivery manifold by gas cutting making v-groove all along the circumference of the cut by way of joining of rising main to the manifold by proper welding work in a precise manner-1Job Suction Line( 2 Nos) :- Fabrication of suction line of dia equivalent to pump inlet dia, for each pump set out of G.I. pipes, cast iron sluice valve- 1 No. for each line , M.S. bends - quantity as per site requirement. MS flanges – qty as per site requirement for connecting pump suction inlet to suction manifold/sump tank. The job includes cutting the pipe in required lengths as per alignment/layout condition of the suction line at site, the cut edges have to be grinded to give them smooth and even surface for proper welding. Welding the flanges to bends and to the pipe pieces at proper ends, and then joining of the suction line to the suction manifold by way of proper welding works in precise manner. Also fitting of sluice valve at appropriate place in the suction line and joining of the other end of the suction line to the pump suction inlet by providing fitting of hexagonal fasteners and rubber insertion sheet. Job also involves creation of a hole of appropriate size in the wall and then properly dressing the hole by cement concrete mix for passing through of the suction line. Delivery Line(2 no):- Fabrication of delivery line of dia equivalent to pump outlet dia for each pump set , out of G.I. pipe cast steel reflex valve 1 no., cast steel sluice valve 1 No. M.S. bends– qty. as per site requirement M.S. flanges qty. as per site requirement for connecting pump delivery outlet to the delivery manifold. The job involves cutting the pipe in required lengths as per alignment/layout conditions of delivery line at site, the cut edges have to be grinded with grinder to give them smooth and even surface for proper welding. welding the flanges to bends and to the pipe pieces at proper ends in a precise manner, fitting of sluice valve and reflex valve at appropriate place in the delivery line and jointing of one end of the delivery line to pump delivery outlet by providing and fitting of hexagonal fasteners and rubber insertion sheet then jointing the other end of the delivery line to the delivery manifold by creating a hole of required size in the manifold by gas cutting and then jointing to the delivery manifold by way of proper welding work in a precise manner making v-groove all along the circumference of the cut and butt welding. Job also includes creation of a hole in the wall and then dressing to appropriate size by cement concrete mix for passing through it the delivery line of the pump. The whole job includes cost of material i-e., G.I Pipes, Reflex Valve, Sluice Valve welding rods, M.S. flanges, M.S. bends, nut bolts, rubber insertion sheet, oxygen acetylene gas used and POL used by DG set, hire charges/carriage charges of welding set, DG set, gas cutting apparatus and labour charges for skilled and semi-skilled workers deployed for execution of job.
Providing, installation testing and commissioning of H.C. Pump of 5000 GPH X 250m ( 1 nos )Head coupled with suitable induction motor. The specification of motor should be 2900-3000 rpm, 50 HZ, TEFC Cooled. The pumping machinery should confirm to relevant ISO standard with all latest amendments. INSTALLATION of Pump sets:- Foundation Blocks ( 1 NO) :-Construction of R.C.C. foundation block – 1 No of required size as per base frame of pumpste inside the pump room at pump room for installation of pumping units by excavation of soil to finish with required dimensions of the pit, removal of excavated material and disposing off the same outside the pump room at suitable place as per site conditions. The job also includes demolishing the existing flooring of requisite area with jack hammer, high carbon steel chisels and sledge hammer, providing and laying of crushed stones 40 mm and ramming properly. Laying of one layer of 1:3:6 concrete mass 30 mm thick. Fabrication& Providing of steel foundation bolts of required dia 600 mm in length – 6 Nos. having threaded portion at one end and an anchor at the other end. Also providing fabrication of steel hexagonal nuts and washers for the foundation bolts. Fabrication of steel reinforced cuboidal structure of requisite size for the foundation block out of T.M.T steel bars 10 mm thick by way of cutting, the steel bars of required length and placing in position at proper spacing longitudinally and transversally and binding with black annealed wire them properly so that internal cube meshes of 6” size are formed. Job includes fabrication charges as well hirer charges of welding set. Lowering the reinforced/cuboidal steel structure in the pit and then placing the base frame of the pump over the steel reinforced cuboidal steel structure making proper leveling and alignment of the base frame over the cuboidal steel structure. Placing the threaded end of the foundation bolts in upright vertical position at required distance in position and in alignment after lowering through holes of base frame. Binding of the foundation bolts with the steel mesh of cuboidal steel reinforced structure at various spots and then fastening the base frame over the reinforced steel structure by tightening the nuts of the foundation bolts, simultaneously ensuring proper leveling and alignment of the base frame over the reinforced cuboidal steel structure. The job further includes laying of M-20 grade cement concrete block including steel reinforcement, machine mixing laying and compaction with vibrator using stone aggregate 1:11/2:3 mix (1 cement 11/2 coarse sand and 3 graded stone mixture of specified grade of nominal size 20mm) including binding chemical up to top level from inside the base frame and up to the bottom line of base frame from outside of the base frame – also plastering the exposed surface of block. Construction of drain for draining out the occasional leakage water of pump. Also repairing of damaged flooring wherever required with cement concrete mixture using chemical bonding material for smooth finish of the flooring of the pump room, and proper curing of cement works for proper strength for a minimum of 07 days. The whole job also includes cost of material and carriage charges for all material from various sources by Mech. Transport as well as head load, hire charges of shuttering material, vibrator and concrete mixture and welding set, POL for vibrator and concrete mixture, labour charges for laying of foundation block, including skilled and semi-skilled workers deployed for execution of job. Carriage:-Carriage of pumping machinery (pump, motor, coupling set, base frame to site of work by Mech. Transportation and Head Load up to Pump Room. The job also includes dismantling the pumping unit, unfastening the coupling bolts, nuts, bolts of the base frame for separating each component viz. motor pump, coupling set, base frame etc., for their proper handling and carriage. Installation (1 nos ):-Installation of new 5000 GPH X 250m. Head H.C. pump set on the foundation blocks at pump room by way of providing and fitting of bolts with nuts and washers for fitting of new pump and motor on each base frame, Also leveling of pump and motor in proper alignment with each other. Tightening the nut bolts of the base frame. Providing and fitting graphite gland packing with fitting of pump glands. Coupling the pump and motor by way of fixing of coupling bolts. Job includes cost of graphite gland packing, nut bolts of the base frame and labour charges for skilled and semiskilled workers deployed for execution of job. Delivery manifold( 1 Nos):-:-Fabrication of delivery manifold out of 150 mm M.S. pipe 10-15 feet length by plugging both the ends by welding 1 No. blind flange at each end and placing in position and required height outside the pump room and anchoring by laying of RCC Cubical blocks 2 nos. Of required size over the manifold with required foundation of blocks beneath the manifolds and curing properly the RCC cubical blocks for proper strength and finally the delivery manifold to be connected with the Rising main by creating a hole of required size in the delivery manifold by gas cutting making v-groove all along the circumference of the cut by way of joining of rising main to the manifold by proper welding work in a precise manner-1Job Suction Line( 1 Nos) :- Fabrication of suction line of dia equivalent to pump inlet dia, for each pump set out of G.I. pipes, cast iron sluice valve- 1 No. for each line , M.S. bends - quantity as per site requirement. MS flanges – qty as per site requirement for connecting pump suction inlet to suction manifold/sump tank. The job includes cutting the pipe in required lengths as per alignment/layout condition of the suction line at site, the cut edges have to be grinded to give them smooth and even surface for proper welding. Welding the flanges to bends and to the pipe pieces at proper ends, and then joining of the suction line to the suction manifold by way of proper welding works in precise manner. Also fitting of sluice valve at appropriate place in the suction line and joining of the other end of the suction line to the pump suction inlet by providing fitting of hexagonal fasteners and rubber insertion sheet. Job also involves creation of a hole of appropriate size in the wall and then properly dressing the hole by cement concrete mix for passing through of the suction line. Delivery Line(2 no):- Fabrication of delivery line of dia equivalent to pump outlet dia for each pump set , out of G.I. pipe cast steel reflex valve 1 no., cast steel sluice valve 1 No. M.S. bends– qty. as per site requirement M.S. flanges qty. as per site requirement for connecting pump delivery outlet to the delivery manifold. The job involves cutting the pipe in required lengths as per alignment/layout conditions of delivery line at site, the cut edges have to be grinded with grinder to give them smooth and even surface for proper welding. welding the flanges to bends and to the pipe pieces at proper ends in a precise manner, fitting of sluice valve and reflex valve at appropriate place in the delivery line and jointing of one end of the delivery line to pump delivery outlet by providing and fitting of hexagonal fasteners and rubber insertion sheet then jointing the other end of the delivery line to the delivery manifold by creating a hole of required size in the manifold by gas cutting and then jointing to the delivery manifold by way of proper welding work in a precise manner making v-groove all along the circumference of the cut and butt welding. Job also includes creation of a hole in the wall and then dressing to appropriate size by cement concrete mix for passing through it the delivery line of the pump. The whole job includes cost of material i-e., G.I Pipes, Reflex Valve, Sluice Valve welding rods, M.S. flanges, M.S. bends, nut bolts, rubber insertion sheet, oxygen acetylene gas used and POL used by DG set, hire charges/carriage charges of welding set, DG set, gas cutting apparatus and labour charges for skilled and semi-skilled workers deployed for execution of job.
Providing, Installation, Testing & commissioning of 5000 GPH x 30 mtrs head mono submersible pumping unit for suction line/dugwell with allied works. he job includes providing of mono block submersible pumpsets ( 1nos + 1 standby ) along with starter and submersible copper cable and then shifting the same to the site of work i-e., l by mechanical transport upto necessary road side and then by head load manually. Providing, Fabrication and fitting of M.S Nipple (of dia equipment of pump outlet dia) with monoblock submersible pumpset. Providing and fitting of delivery G.I Pipe line by way of welding, fabrication and filling of M.S Flanges, nut bolts of required size. The job further includes fitting of monoblock sub pump set with suction line of each HC pumping unit installed. Also installation of Starter for each mono sub pump at appropriate place in the pump room and laying of copper submersible cables of each submersible pump set unit with making of leak proof. Pump cable joints at pump ends with the help of patch roll and taps. Also providing and fitting of copper cables of required current carrying capacity in between starters and the installed voltage stabilizer, then testing, commissioning on full load. Complete job including the cost of material, labour charges, tools and tackles and various types of transportation involved.
Providing of Required capacity submersible pumping unit app 10000 GPH X 50m head along with submersible motor and cable, MUG panel cum starter to including carriage up to actual site using mechanical transport, by head load or other means along with one stand by unit Submersible Pump Set: -Installation M.S. Adopter: -Fabrication of 1 no graded M.S. adopter of Required dia of requisite length by way of welding of M.S. flange Required dia. at one end of the adopter and making outer threads on the other end of the adopter. The threads on the adopter should be properly meshing with inner thread of discharge outlet of submersible pump set so as to make an air tight fitting. Fitting firmly the threaded end of the adopter in the discharge outlet of the submersible pump set. The job includes cost of material and labour charges and hire charges of welding set etc. Tie Rod Clamp: -Providing/fabrication of 1 no u shaped tie rod clamp of approx. – 3 mtr span fabricated out of 40 mm x 6mm M.S. flat and fitting of the tie rod clamp to the submersible pump set with the help of heavy duty bolts and nuts welded on the side of the clamps. Job including list of material and labour charges. Column Pipe: -Fabrication of GI column pipes quantity as per safe discharge position of bore well provided by boring agency each column pipe of length 10 ft. long out of Required dia. GI pipes by way of cutting GI pipes in required lengths and then providing and welding MS flanges to the each end of the pipe lengths in a precise manner exactly perpendicular to the column pipes around the periphery. Job including cost of welding rods, labour charges, hire charges of welding set, gas cutting set as well as to and fro carriage charges of column pipes to work shop for beveling of pipe ends for proper welding the flanges. Submersible Copper Cables: -Making of leak proof joints of submersible copper cables on motor side using patch roles & insulating tapes for connecting each lead of three core of submersible copper cables. Coming from motor with their respective leads of three core copper cables (2no’s) which further to be connected with terminals of star connection arrangement and delta connection arrangement at the motor starter after proper thimbling. The job includes cost of material (excluding the cost of submersible cables)&labour charges. Lowering Installation: - Lowering of submersible pump set fitted with adopter and tie rod clamp along with fitting and lowering in sequence. column pipes Required dia (Each 10 ft.long) one by one alongwith the 3 core submersible copper cables of adequate current carring capacity The job includes placing one column pipe over the other in sequence and connecting with each other by tightening the nut bolts at the flanges with providing & insertion of rubber joint in between the flanges for making leak proof joints of the column pipes and lowering into the tube well step by step with the help of column pipes holding clamps and chain pulley block. The top most column pipe is to be connected with installed delivery line (to tank/to distribution) of the pump set by way of providing and inserting in between M.S. bend and fitting one end of M.S. bend on the M.S. column pipe and other end to the delivery line by fastening the nut-bolts of the flanges. Job includes cost of materials i.e. rubber joints and nut-bolts of the column pipes required for replacement of worn out nut-bolts and labour charges. Testing Commissioning: - Providing and fitting of proper sized thimbles to each lead of 3 core submersible cables (2 no’s) coming from motor and then connecting the leads to their respective terminal of star and delta arrangement formation on the motor starter and then connecting with three phase power supply by putting on the main switch and motor starter respectively. Complete job including cost of material and labour charges.
Providing of Required capacity submersible pumping unit as per data provided by drilling agency head along with submersible motor and cable, MUG panel cum starter to including carriage up to actual site using mechanical transport, by head load or other means along with one stand by unit Submersible Pump Set: -Installation M.S. Adopter: -Fabrication of 1 no graded M.S. adopter of Required dia of requisite length by way of welding of M.S. flange Required dia. at one end of the adopter and making outer threads on the other end of the adopter. The threads on the adopter should be properly meshing with inner thread of discharge outlet of submersible pump set so as to make an air tight fitting. Fitting firmly the threaded end of the adopter in the discharge outlet of the submersible pump set. The job includes cost of material and labour charges and hire charges of welding set etc. Tie Rod Clamp: -Providing/fabrication of 1 no u shaped tie rod clamp of approx. – 3 mtr span fabricated out of 40 mm x 6mm M.S. flat and fitting of the tie rod clamp to the submersible pump set with the help of heavy duty bolts and nuts welded on the side of the clamps. Job including list of material and labour charges. Column Pipe: -Fabrication of GI column pipes quantity as per safe discharge position of bore well provided by boring agency each column pipe of length 10 ft. long out of Required dia. GI pipes by way of cutting GI pipes in required lengths and then providing and welding MS flanges to the each end of the pipe lengths in a precise manner exactly perpendicular to the column pipes around the periphery. Job including cost of welding rods, labour charges, hire charges of welding set, gas cutting set as well as to and fro carriage charges of column pipes to work shop for beveling of pipe ends for proper welding the flanges. Submersible Copper Cables: -Making of leak proof joints of submersible copper cables on motor side using patch roles & insulating tapes for connecting each lead of three core of submersible copper cables. Coming from motor with their respective leads of three core copper cables (2no’s) which further to be connected with terminals of star connection arrangement and delta connection arrangement at the motor starter after proper thimbling. The job includes cost of material (excluding the cost of submersible cables)&labour charges. Lowering Installation: - Lowering of submersible pump set fitted with adopter and tie rod clamp along with fitting and lowering in sequence. column pipes Required dia (Each 10 ft.long) one by one alongwith the 3 core submersible copper cables of adequate current carring capacity The job includes placing one column pipe over the other in sequence and connecting with each other by tightening the nut bolts at the flanges with providing & insertion of rubber joint in between the flanges for making leak proof joints of the column pipes and lowering into the tube well step by step with the help of column pipes holding clamps and chain pulley block. The top most column pipe is to be connected with installed delivery line (to tank/to distribution) of the pump set by way of providing and inserting in between M.S. bend and fitting one end of M.S. bend on the M.S. column pipe and other end to the delivery line by fastening the nut-bolts of the flanges. Job includes cost of materials i.e. rubber joints and nut-bolts of the column pipes required for replacement of worn out nut-bolts and labour charges. Testing Commissioning: - Providing and fitting of proper sized thimbles to each lead of 3 core submersible cables (2 no’s) coming from motor and then connecting the leads to their respective terminal of star and delta arrangement formation on the motor starter and then connecting with three phase power supply by putting on the main switch and motor starter respectively. Complete job including cost of material and labour charges.
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .