8521 REPAIRS TO FALSE CEILING, WALLS, FLOORS, PLUMBING ITEMS AND SANITARY FITTINGS, IRON MONGORY AND MISC ITEMS IN OTM ACCN AND SOUTH IN THE AFMC AREA UNDER GE (CENTRAL) PUNE

Amount

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm & removing from site all as directed.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm & removing from site all as directed.

Taking down shutter of any description and removing frome site exc. 1 Sqm & not exc. 2 Sqm each leaf & removing from site all as directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & as directed.

S & F Factory made any colour solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S&F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Min thickness of powder coating 50 micron) complete all as specified and as directed.

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/Mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Min thickness of powder coating 50 micron) complete all as specified and as directed. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/Mtr including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified & as directed. (Min thickness of powder coating 50 micron) (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F in repair door closer (aluminium extuded body section) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35Kg complete all as specified & as directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

S & F 100mm long Stainless steel but hinges medium weight complete all as specified and as directed.

S & F 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm long Extruded aluminium alloy powder coated handles handles, 150mm long fabricated type complete all as specified and as directed.

S&F 300 mm long Aluminium alloy powder coated handles sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply & fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel, with not less than 1.00mm wall thickness including decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane.

S&F figured glass 3 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane

M & L for preparation of new wooden surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water all as directed.

M & L rendering 10mm thick in CM 1:6 on fair face of brick / concrete / stone surfaces of any description and finishing the surfaces even and smooth complete all as specified and directed.

M & L rendering 15mm thick in CM 1:4 fair face of brick / concrete / stone surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed

M & L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer over & including 2mm thick wall care putty complete all as specified and directed.

M & L for preparing new plastered or unplastered surface of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

Material and labour for Joint free Non skid coloured ceramic tiles (Matt finish) of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

M & L for coloured glazed , designer pattern (Dark & light shade combintion) ceramic tiles of size 300mm x 450mm x 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land and complete all as specified and directed.

Material and labour Light colour Virified Ceramic tiles of size 600mm x 600mm x 8 to 9mm thick (square/ rectangular) polished as in floor set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM 1:6 including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

All as per item No 35 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

M & L 20 to 25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S & F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) with trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed.

S & F in repairs Vitreous china snow white Wash Hand Basin (over or under counter) Oval shape of Size 560mm x 470mm excluding pillar taps & waste pipe but including Waste coupling chromium plated complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs 15mm bore stop cock / angle cock copper alloy, chromium plated , fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union complete all as specified and directed.

S & F in repairs 15mm bore bib taps cast copper alloy chromium plated , fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs CP Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore Bib taps, two way type , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repairs 15mm bore swan neck pillar taps of cast copper with capstan head , chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer, telephonic type / sink (3-in-1) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450 mm complete all as specified and directed.

S & F in repairs Brass, Chromium plated, Tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

Supply and Fix 15mm bore CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as directed.

Supply and Fix 20mm bore CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

Supply and fix in repairs 75mm bore out let PVC (SWR) floor trap / Nahani trap, plain with grating including jointing with solvent cement & making good the disturbed surface with PCC 1:2:4 or CM (1:3) complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary clampping arrangements all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallsincluding necessary clampping arrangements all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board made of stainless steel 1.00mm thick with plugs washers and waste including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm , bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 250 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 500 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size ( 600mm x 600mm) using hot dipped galvanised steel section, exposed surface with precoated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick prestraightened GI wire on main runners including making niches for fans / light including dismantling of Wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 8mm thick, Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid , including Powdercoated GI snap grid frame work and hanging arragement with GI wire for false ceiling including dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.all as specified

Dismantling Asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as directed.

S & F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe-410-W (Grade-E-250) quality-A complete all as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for filleting in any position & to any shape, sectional area exc.25 but n. exc. 50 sqcm. In CM 1:4 including all mitres , stops etc, complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and paving not exc 15cm thick (below or above ground level) complete all as directed.

M & L for 75mm thick PCC 1:4:8, type C-2 (using 40mm graded stone aggregate) as in sub base/flooring/ paving complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregates in foundation, filling in mass concrete for manholes & drains complete all as specified and directed.

M & L for 50mm thick 1:3:6, type C2 , using 40mm graded stone aggregate as in plinth protection / path, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for precast coloured chequered cement concrete tiles, glossy finish/perforated finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) set , jointed and pointed in neat cement slurry as in floor laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

L.T Associate (BID ID -3104240)

Parhar Enterprise (BID ID -3101538)

Ms. S.K. ASSOCIATES (BID ID -3103472)

M/S NAVNEET S MORDE (BID ID -3103202)

PRANAV ENTERPRISES (BID ID -3102936)

Sunny Enterprises (BID ID -3102035)

M/s.BAJRANG CONSTRUCTION (BID ID -3103073)

PRASHANT CONSTRUCTION (BID ID -3103266)