SPL REPAIR TO ROOF SHEET OF BLDG NO DF 15 DF 16 DF 17 AND DF 18 AT KHALASI LINE AT SHILLONG CANTT AND SPECIAL REPAIR TO BLDG NO MES (KT) P 1 AT KLP LOC OF 119 (TA) ASSAM UNDER GE SHILONG

Amount

AGE B/R SCHEDULE PART - I Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings omplete all as specified and directed

Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) omplete all as specified and directed

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) omplete all as specified and directed

Taking down shutters of any description nexc 1.0 Sqm resecuring or easing & adjusting refixing in same opening omplete all as specified and directed

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm resecuring or easing & adjusting refixing in same opening omplete all as specified and directed

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed

Taking down shutters of any description nexc.1.0 Sqm each complete all as directed

Demolition of Brickwork/solid concrete block work built in Cement mortar omplete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets omplete all as specified and directed

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises omplete all as specified and directed

Taking up or down steel tubing and disconnection, for 15mm bore of pipes Complete all as specified and directed

Taking up or down steel tubing and disconnection, for 20mm bore of pipes :-

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm incl dismantling complete.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.

M&L for 2nd class hardwood 30 mm thick plain ,framed ,panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered paritcle board medium density wod particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed

M &L glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 30mm thick of 2nd class hard wood complete all as specified and directed.

M &L glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as specified and directed.

Hacking out old broken glass (any thickness,size ,quality or description) from wooden frames or stone , concrete or brick surrounds,glazed with putty or fixed with beads etc complete all as specified and directed.

S/F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sq/m in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminium alloy , anodised sliding door bolt with hasp,staples(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed of size 250 mm complete all as specified

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and directed.

S&F butt hinges 75 mm medium weight mild steel cold rolled and fixed complete all as specified and directed.

S&F 18/19 mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated (powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and directed.

Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube , suppling & fixing in opening as per specifiecation & drawings complete all as specified and directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified and directed.

M & L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M & L 25mm thick PCC1:2:4 (12.550 mm graded aggregate) type B-0 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6

All as Per Item no 51 above in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc sect and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and as directed

M&L for providing precast cement concrete set in CM (1:4) type B1 1:2;4 (20 mm graded aggregate) in landings,cover slabs , shelves and similar artilces with plain faces incl formwork complete all as directed and as specified

M&L for MS TMT bars 10 mm dia and over out to length, bent to shape required binding with and incl MS annealed wire not less than 0.90mm dia complete all as specified and directed.

M&L for 20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 2mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

S&F framed work such as in door or gates as angle or others section for fixing of sheets grills/ gaurd bars gratings,etc,with ends of bar shouldered/ inserted into wooden frames to steel window and and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S & F Brass CP tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and directed.

S&F in repairs vitreous China clay WHB flat back size 450x300 mm incl pedastal , PVC waste pipe 32 mm dia, waste coupling brackets etc complete all as specified and directed.

S&F 15 mm Brass CP angular stop cock fancy type with Capstan heads fixed in repairs complete all as specified and directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed allas specified and directed

S&F in repairs Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified of make Jaquar/Parryware/Prayag

&F in repairs CP over head shower dia 100mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Cat part No: OHS-1989with CP shower arm dia 20 mm & 450 mm long round shape without bend for wall mounted showers with flange Cat part No: SHA-49483 or equivalent in marc/parryware/prayag complete all as specified and directed.

S&F in repairs CP wall mixer with provision for overhead shower complete with 115 mm long bend pipe , connecting lengs & wall flange (without hand shower & over head shower) Cat part No:CON-273KNUPR of Jaquar or equivalent in marc/parryware/prayag

S&F in repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in marc/parryware/prayag

S&F in repairs Soap dish holder of make Prayag Cat Part No:-BA-05 or equivalent in marc/parryware/prayag

S&F in repairs Toilet roll holder with stainless steel of make Jaguar Cat Part No:- AKP-35755PS or equivalent in marc/parryware/prayag

S&F in repairs Towel ring sqare shape stainless steel complete all as specified and directed. of Make Jaguar Cat Part No:-CAN-1121N or equivalent in marc/parryware/prayag

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railling 60 cm long screw and cup washer.

S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item 89 above , but for 20mm dia (Bore) complete all as specified and directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L Applying a coat of Synthetic enamel paint incl preparation of old existing wooden surfaces over 10cm width or girth complete all as specified and directed.

M&L applying two coat of synthetic enamel paint over 10 cm width or girth over a coat of pink primer on new wood surface complete all as specified and directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and directed.

complete removal of existing treatment on old wall surface and applying two finishing coat of cement base paint complete all as specified and directed.

M&L for preparation of new wall surface and applying two finishing coat of cement base paint complete all as specified and directed.

S&F in repairs decorative defree curtain rod of wooden finish of 20 mm dia incl bracket or end bracket for fixing of rod all as directed and specified.

AGE E/M SCHEDULE PART - II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.100 above but for socket outlet point 5 Amp on same board complete all as specified and directed.

Description all as per Srl item No.100 above but for socket outlet point 5 Amp on Independent board complete all as specified and directed.

Description all as per serial item No 100 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed.

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt wall light , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings Make- Wipro /Philips or equivalent.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona complete all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and directed.

S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable complete all as specified and directed.

Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from strting point complete all as specified and directed. .

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and directed.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and directed.

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

S & F in repair LED luminaries 600mm x 600mm, 36W, 220V, AC diffuser soft glare free light complete with driver, holders and LED lamps including connecting up with 3 core flexible wire complete all as directed Make Bajaj / CG/ Philips

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including Casing capping on wall/ceiling ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and directed.

M/s Hussain & Bros

M/S Nakul Chandra Samal

M/S MANOJ KUMAR BAL

SUNITA DEVI