Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-Finance | L1 | Accepted-Finance Valid documents received and accepted | |
| 2 | L2₹39.3 L+₹1.3 L (3.55%)Accepted-Finance | L2 | Accepted-Finance Valid documents received and accepted | |
| 3 | L3₹40.2 L+₹2.3 L (5.96%)Accepted-Finance 59 ST MARY S ROAD SECUNDERABAD 500 003 | SECUNDERABAD | SECUNDERABAD | TELANGANA | 500003 | L3 | Accepted-Finance Valid documents received and accepted | |
| 4 | L4₹43.0 L+₹5.0 L (13.2%)Accepted-Finance | L4 | Accepted-Finance Valid documents received and accepted | |
| 5 | L5₹43.0 L+₹5.0 L (13.3%)Accepted-Finance | L5 | Accepted-Finance Valid documents received and accepted |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
31 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Sagar Maheshwari, IDSE
GE (AFA) Hyderabad PIN-500043
ADDN/ALTN FOR REORGANISATION OF 14 AFAH AT AFA HYDERABAD
2023_MES_621461_1
8377/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AFA) Hyderabad
As per tender pages
4 documents required · 4 mandatory
₹500
GE (AFA) Hyderabad
₹88,000
Yes
7 Nov 2023
3 Oct 2023
2 Nov 2023
3 Oct 2023
31 Oct 2023
17 Oct 2023
3 Oct 2023 - 16 Oct 2023
Amount
Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.
Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.and removing rubbish to a distance exc.1.5 km and n exc 3 km complete all as specified and directed.
Demolition of Brick/stone masonry built in cement mortar of any description, .and removing unserviceble debris to a distance exc.1.5 km and n exc 3 km complete all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for foundation,Plinth protection, filling and mass concrete and removing debris to a distance exc.1.5 km and n exc 3 km complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for RCC Chajjas/Roof projections .and removing debris to a distance exc.1.5 km and n exc 3 km complete all as specified and directed. (Reinforcement cut as required to facilitate demolition)
Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing).and removing unserviceable debris to a distance exc.1.5 km and n exc 3 km complete all as specified and directed.
Cutting opening, through brick wall for door, window and other opening or enlarging existing opening converting window into door opening etc or cutting out defective brick work for under under-pinning including providing fixing and removing shoring ,cleaning and stacking bricks, removing surplus serviceble bricks ,hard core, etc complete all as specified and as directed
M&L for Forming jambs, etc. to openings in Cement mortar 1:4 or cement lime mortar 1:2:9, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified.
M&L for Making good under cills or over arches, lintels and bressummers in Cement mortar 1:4 or cement lime mortar 1:2:9. including all pinning when necessary complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.
Taking up or down upto 25 mm bore of pipe steel tubing and connections, for refixing or removal to store complete all as directed.
Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of excavated soil complete all as specified and as directed.
Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area in foundation all as Specified and directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as directed.
M &L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as directed.
M & L cement concrete in foundation, filling and mass concrete 1:4:8, type D2 ( using 40 mm graded stone aggregate) complete all as specified and directed.
M&L for pre-cast cement concrete block masonry of 1:3:6, Type C1 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
M&L for Use and waste of Formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and directed.
M&L for Use and waste of Formwork to sides of raft beams,plinth beams,and similar work, of rough finished flat surface of concrete, complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1(using 20 mm graded stone aggregate), as in plinth beams,bases for columns etc, basement slabs, under-reamed piles and mass concrete and similar works complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1(using 20 mm graded aggregate), as in Beams, lintels over 1.50m span , and similar works etc completed all as specified and directed.
Formwork to soffits of suspended slabs such as roof slab ,floor slab,landing and similar work not exc 200 mm thick , complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded aggregate), as in Slabs supported on walls, beams and coloums in floors, roof landing, balcones conopes deck slab and in shelves etc all as directed .
Formwork to chajjas, troughs and similar items including edges complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded aggregate), as in chajjas all as directed .
M&L for precast Reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in Wash hand basin platform slabs, man hole cover slabs, shelves etc including necessary form work set in CM 1:4, complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
M&L for mild steel TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
S&F mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binders, complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm bore , type 'B' single socketed in any length laid in trenches or floors, fixed to walls,floors,ceiling etc complete all as specified and as directed
S&F PVC (SWR) pipes 75 mm bore single socketed in any length laid in trenches or floors, fixed to walls,floors,ceiling etc complete all as specified and as directed
S&F PVC (SWR) bends any radius suitable for 110mm bore pipe, complete all as specified and as directed
S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, etc complete all as specified and as directed
S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal complete all as specified and as directed.
S&F PVC (SWR) branch piece , 110mm, Double (double Y) equal or unequal complete all as specified and as directed.
S&F PVC (SWR) 'P’ trap 110mm complete all as specified and as directed.
S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, complete all as specified and as directed
S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, complete all as specified and as directed
S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
S&F Salt glazed stoneware gully trap, type Q 125x100 mm, complete all as specified and as directed.
S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.
Cutting chases, pinning in stone or brick walls and making good to facings where required and pointing in cement mortar 1:3 and cutting not exc 10 cm girth complete all as specified and as directed.
S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.
S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.
S&F of Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts complete all as specified and as directed.
S&F of Pillar taps 15 mm dia, cast copper alloy Long nose, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore complete all as specified and as directed.
S&F of Bib taps, CP fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed
S&F of stop valves / angle cocks 15mm dia CP fancy type screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete.
S&F of stop valves(concealed type) 15mm dia CP fancy type screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete.
S&F of Vitreous china squatting pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap P or S trap and set in and includng concrete as per site requirement including making good to floor complete all as specified and directed by Engr -in- charge.
S&F 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for fluslhing cistern and connections to pipes including long bends complete all as specified and as directed.
S&F of PVC waste pipe 32 mm bore, 900 mm long complete all as specified and directed by Engr -in- charge.
S&F of PVC connection 15 mm bore with brass CP nuts, of length 450 mm complete all as specified and as directed.
S&F High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr -in- charge.
S&F for 15 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr -in- charge.
S&F for 20 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr -in- charge.
S&F for 125 mm size CP shower rose, fancy type with CP arm, all as specified and as directed
S&F of stainless steel gratings 100mm dia, hinge or openable type, fixed with suitable solvent cement etc completed.
M & L for rendering 15 mm thick on other than fair faces of brick wall mixed with WPC @ 3% by wt of cement weight including fair finished even and smooth surface without using extra cement, in CM 1:4, complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately under respective items of this schedule.
M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:3 on concrete ceiling surfaces , finished even and smooth (without using extra cement) of any description and in any position, with necessary scaffoldings complete all as specified and as directed by theEngineerin-Charge.
M&L Joint free Non Skid ceramic coloured tiles of premium quality 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour, laid over and including Screed bed or bedding layer of cement mortar (1:6) 15mm thickcomplete all as specified and directed.
M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surfaces of dados, skirting etc. 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces complete all as specified and as directed. (Note: Colour of tile will be finalized by Engr-In-Charge)
S&F of 18 to 20 mm thick Granite slab work (table rubbed and polished) black coloured, for any type of platform/ counter/ WHB platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc laid over and including screed bed or bedding layer 20mm thick in CM (1:6) complete all as specified and as directed.
M&L for marble work 18 to 20 mm thick of any shade other than white & black (table rubbed and polished) in window- cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble laid over and including screed bed or bedding layer 20mm thick in CM (1:6) complete all as specified and as directed.
S&F of18 to 20 mm thick Granite work (table rubbed and polished) black coloured,for wall lining (veneering to wall ) laid over and including 12mm thick bedding layer or backing coat in cement mortar (1:3) and pointing with white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L rounding to edges of stone slabs one edge, in cooking plotforms,steps,cills etc complete all as specified
M&L Second class hard-wood in scantlings, clean sawn, fixed to existing chowkats or to walls, etc complete all as specified and as directed
M&L for Second class hardwood Plain fillets in cub boards, shelves, etc Exc 13 & n. exc 25 sq. cm, square, rectangular or triangular in section, clean sawn, secured with mills or brads, , etc complete all as specified and as directed
M&L for Second class hardwood Plain fillets in cub boards, shelves, etc Exc 6 & n exc 13 sq. cm, square, rectangular or triangular in section, clean sawn, secured with mills or brads, , etc complete all as specified and as directed
M&L 18mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, complete all as specified and as directed..
M&L 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, complete all as specified and as directed..
M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.
M&L for external teak wood lipping, 6mm thick, fixed with nails 19mm wide all as directed.
S&F Brass Continuous (piano) hinges, width of flap 30mm bright finish or electrogalvanised, all as specified and as dierected.
Supply and fix 100mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.
S&F of 100mm aluminium anodised Hasp and staple, safety type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.
S&F of tower bolt 100mm long, extruded aluminium anodised complete all as specified and as directed.
S & F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work partitions (fixed partitions) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e.at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for any type of shutters of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
S & F 12 mm thick plain/ frosted glass, area n. exc 0.5 sqm in each pane as in fixed partitions,openings, fixed window/ ventilators and similar work including cutting to shape, drilling holes as required, complete all as specified and directed.
S & F 12 mm thick plain/ frosted glass, area exc 0.5 sqm in each pane as in fixed partitions, hinged doors / sliding doors, automatic doors and similar work including cutting to shape, drilling holes as required, complete all as specified and directed.
S&F Powder coated aluminium ventilators of approximate size 600mm x 900mm, top hung type made out of anodised aluminium extruded section of thickness not less than 1.50 mm, suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles and including all other required fittings as per standard engg. practice, complete all as specified and directed.
S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick F/H section channel fixed with steel screws complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed
S&F 4 mm thick frosted glass, pin head type and glazing with oil putty in squares n .exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in -Charge.
S&F 6.30mm thick Sheet glass, ordinary quality in square exc 0.5 sq.m in each pane fixed to the frames of Aluminium partitions and Applying Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed
M&L for 19 mm thick prelaminated particle board exterior grade with prelaminated both face with decorative choice laminations, fixed to the aluminium frames complete all as specified and as directed.
S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints (including holdfasts fixing and making good with PCC type B1 1:2:4 (using 20 mm graded stone aggregate etc and neceesary accessories) complete all as specified and as directed.
S & F 40 mm thick, Flush shutters, HDF type both side veneered finished solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed
S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed
S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21, complete all as specified and directed.
S&F of butt hinges of 100mm size, medium weight cold rolled mild steel and fixed complete all as specified and as directed.
S&F of 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.
S&F of tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.
S&F of 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Material and labour applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description including preparation of surfaces, not otherwise described over 10 cm width or girth complete all as specified and as directed.
M & L Preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint), complete all as specified and directed.
M & L Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint ), complete all as specified and directed.
Supply only Liquid water proofing compound.
Disconnecting existing tanks exc 500 ltrs and n exc 1000 ltrs setting aside and hoisting of PVC water tank of any capacity including cleaning and removing all scale & dirt, etc from tanks, required reconnecting and re- fixing in position all scale and dirt etc from tanks and writting date of cleaning and due date of cleaning, etc all as specified and as directed.
S&F 1000 ltrs of capacity Rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified in SSR Part I and as directed.
Supply and fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.
S&F of Gun-metal globe or gate valves 25mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.
S&F of High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors including concealing the pipe as per site requirement completeall as specified and directed.
S&F Powder coated (Thickness not less than 50micron) Aluminium Three Track Sliding windows of Approximate size 2500mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 92x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings as per standard Engg. practice, complete all as specified and directed.
Complete removal of the existing treatment on ceiling and applying two coats of distemper oil emulsion over a coat of chalk whiting on plastered surface preparatory to distemper including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for preparing of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of white wash including preparation of surfaces complete all as specified and as directed.
M & L Complete removal of existing treatment and applying two coats of oil emulsion distemper on walls over a coat of alkali resistant priming paint over the coat of 3 mm thick wall care putty on wall, complete all as specified and directed.
Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion on walls over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty complete all as specified and as directed
M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer & bio wash on walls, all complete and as directed by Engineer-in-Charge.
M&L preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer all complete and as directed by Engineer-in-charge.
M&L for Structural steel, rolled section (ISLB-200) such as , joist, beam, channel, angle, tee, in any lengths of grade Fe 410-W (Gde-E250) quality-A for structural support to slabs etc complete all as specified and as directed by Engineer-in- charge.
M&L for Mild steel plates, plain or chequered, 5mm thick or over in thickness in any sizes of grade Fe 410-W (Gde-E250) quality-A for structural support to slabs etc complete all as specified and as directed by Engineer-in- charge.
M&L for epoxy grouting in gaps between any type of structural members in any position upto 300 mm girth/depth as per site requirements all complete and as directed by Engineer-in-charge.
M&L for propping in the slab and providing under pinning to ensure safety of the adjoining work or property during dismantling/demolition including provinding temporary enclosures or partitions and necessary scaffilding with proper cloth covering as per site requirements all complete and as directed by Engineer-in-charge.
Dismantling False ceiling boards with grids any description, fixed in any position with screws etc complete all as specified and directed.
S & F POP double layered suspended false ceiling grid sysytem with galvanised steel section frame work of perimeter channel 30 mm x 20mm x 27mm depth 0.55 mm thick, intermediate channel 15 mm x 15mm x 45 mm depth, 0.90mm thick ceiling section 26mm x 26 mmx 51.5mm depth 0.55 mm thick and ceiling angle 25mm x10mm x0.55 mm thick including fixing 1200 mm long cross channels to be interlocked between main runners at 600mm c/c making a module of 1200mmx600mm cross channels to be suspended independently and fixing with 12mm thick plain Gypsum boards and treated with plaster of peris for flush look and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
Taking down wall panelling of any description and in any position etc all as specified and as directed.
S & F 25 mm thick insulated PVC wall lining, consisting of PVC Insulated panels having expanded polystyrene (EPS) stuck to 2 mm thick plain colour PVC sheet duly fitted into the wall as per specification, complete all as specified and directed. (Make Rajshree, Sintex).
S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified and directed. (Make Rajshree, Sintex).
Cutting holes into or through stone wall built in cement mortar or cement lime mortar and walls of cement concrete, of superficial area exc 150 sq. cm but n. exc. 400 sq cm, complete all as specified and directed.
Demolition, breaking up and removal of 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and in any position, all as specified and as directed.
M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 100 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.
M&L for 100 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed. Make: Indo/Khandelwal/ Mancheryal Ceramics
M&L for brick work for sewage chamber with sub class `B' brick (old size bricks) straight or curved on plan exceeding 6 m mean radius built in CM 1:4, complete all as specified and as directed.
M&L for PCC 1:2:4, type B-0 (12.5 mm graded stone aggregate) as in copings ,cills, bed plates, valley gutters, kerbs etc including necessary form work complete all as specified and as directed.
M&L PCC (1:2:4) type B-2, using 40 mm graded stone aggregate as in surface channels for sewage chembers and benching at bottom of drains including forming fair finishes to drains/channels etc complete all as specified and directed.
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out soft / loose soil, complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground leve.and removing debris to a distance exc.1.5 km and n exc 3 km complete all as specified and as directed..
M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed...
M&L 75 mm thick PCC (1:4:8) type D2 (40 mm graded aggregate) as in sub base for floors all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including Sand filling of 50mm thick (average) watering and consolidation, complete all as specified and as directed.
M & L 25 mm thick cement concrete (1:2:4) type B-1, 1:2:4 mix, ( 20 mm graded stone aggregate ) as in sub base of floor finishes, complete all as specified and directed.
M & L for Vitrified ceramic tiles light shade, 10 mm thick (square or rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors/skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, laid over and including Screed bed or bedding layer in cement mortar (1:6) 15mm thick complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in top layer of plinth protection, path etc., finished even and smooth without using extra cement complete all as specified and as directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, all as specified and as directed.
M&L for Cutting into existing manholes for connecting new drains upto 225 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all complete and as specified.
Taking down the unserviceable point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ceiling roses pendent regulators, sockets etc any light points and making good disturbed surfaces of walls and floors etc complete all as specified and directed.
Taking down ceiling fan/Exhaust fan, dismantling blades and removing fan and refixing ceiling fan/exhaust fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed.
M&L for point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core FRLS cable with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC Casing Caping of suitable size with accessories fixed on stone wall etc., Including terminal boxes made out of 1.2mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated Bakelite sheet for housing switches, sockets, regulators etc for:-
Note (i) : Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
All as per item No 149 above but One light point controlled by one switch
All as per item No 149 above but one ceiling fan /Exhaust fan point controlled by one 5 Amps switch
All as per item No 149 above but socket 5 amp on independent board.
All as per item No 149 above but one 3/5 pin socket out let 5 amp on same board with other switches.
All as per item No 149 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuity cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.
Supply and fix switch socket combination 5 A/ 15 Amps 5 in 1, multipurpose flush type, ISI marked complete all as specified and as directed.
Supply and fix switch socket combination 2 in 1, 5 Pin 5 Amps, multipurpose flush type, ISI marked complete all as specified and as directed.
Supply & Fixing socket outlet 3/5 pin 5 Amp flush type ISI marked complete all as specified and as directed.
Supply and fix switch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.
S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.
S & F stepped type electronic fan regulator flush type all as specified and as directed.
S&F surface mounting / wall mounted LED tube light fitting 1x18 to 20watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.
S&F surface mounting / wall mounted LED tube light fitting 1x10watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.
Supply and Fix LED luminaire 600mm x600mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge.
Supply and fix wall mounting fan 400 mm sweep double string with inbuilt speed regulator, complete all as directed
M&L single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 AMP 240 V 50 Hz AC complete all as directed.
M&L for Sub Main wiring PVC insulated cable 2 single core 6sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & capping of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc. complete all as specified and directed by Engineer-in-Charge.
Note (I): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (II)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (III) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
Supply and fix Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.
Supply and fix Sheet metal enclosure double door MCB DB SPN 6 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.
Supply and fix Sheet metal enclosure double door MCB DB SPN 4 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.
S&F of MCB SPN 6 to 32A, 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.
S&F of MCB SP 6 to 32A 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge.
M/s RAMA LAKSHMI CONSTRUCTIONS
DWARKA PERSHAD RADHEY RAMANLAL
SRI RAM CONSTRUCTION
GUTHIKONDA BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .