All in all Comprehensive annual operation, repair, maintenance of complete light and sound system at Amar Jawan Jyoti and Arjun Pratima including the 20 exhibit rooms for a period of 3 years.

MEDIUM FLOOD, WIDE FLOOD, 60º x 10º DISPERSION AS REQUIRED. QTY-08 NOS. LED PAR FIXTURE, 10W x 7 RGBW HIP, 1550 LUMENS, IP 66 RATED, TEMPERED GLASS, MEDIUM / WIDE BEAM ANGLE, CONTROLLED VIA DMX 512 AND RDM STANDARD DIGITAL COMMUNICATION PROTOCOLS WITH BUILD IN POWER SUPPLY AND HAVING IN AND OUT DMX CONNECTORS ETS AS REQUIRED QTY-32 NOS.

LED PAR FIXTURE, 15W x 14 RGBW CHIP, 3100 LUMENS, IP 66 RATED, TEMPERED GLASS, MEDIUM / WIDE BEAM ANGLE, CONTROLLED VIA DMX 512 AND RDM STANDARD DIGITAL COMMUNICATION PROTOCOLS WITH BUILD IN POWER SUPPLY AND HAVING IN AND OUT DMX CONNECTORS ETS AS REQUIRED QTY-16 NOS. 12V RGB LED STRIP LIGHT HAVING CE CETIFICATION, 50,000 HOURS WORKING LIFE FOR OUTDOOR USE AND OF IP RATIING IP65, AS REQUIRED QTY-150mtr DRIVER FOR ABOVE LED STRIPS OF SUITABLE WATTAGE FOR APPROX, 10 MTRS OF LED STRIP QTY-02 NOS. DMX LED CONVERTER FOR LED STRIPS OF SUITABLE RATING FOR 10 MTRS. OF LED STRIP QTY-02 NOS. LED DRIVER- DRIVENET 832 WITH INPUT VOLTAGE RANGE 90-260V AC, POWER CONSUMPTION: 1200W, PF POWER FACTOR: 0.95, ELECTRONIC PFC CONTROLLER, OUTPUT CHANNEL: 32 (8 OUTPUT, CHANNELS EACH), POWER x OUTPUT MZXIMUM 136W, POWER CHANNEL MAXIMUM 34W. QTY-02 NOS. 2200m W DIODE GREEN LASER LIGHT, CONTROLLED OVER ILDA WITH BUILT-IN MEMORY AND TRIGGABLE THROUGH DMX, 1500m W POWER AT 520nm BEAM SPECIFICATIONS (FULL ANGLE): CA, 3.5MM/1.5MRAD AND HAVING POWER CONSUMPTION OF 120W. QTY-02 NOS.

FOG MACHINE WITH VOLTAGE 230 VOLT, HEATER: 1500W, OUTPUT: 20000 CU, FT/MIN, FIRST HEAT UP TIME : 8.5 MIN, TANK CAPICITY: 6 LITER, 9 MIN / LITER. QTY-02 NOS. LASER CONTROLLER QUICKSHOW QTY-02 NOS. INTEGRATED CONTROLLER TO RUN THE SHOW AND HAVING MINIMUM I7 PROCESSOR WITH SHOW CONTROL SOFTWARE (SHOW CAD) COMPLETE WITH NECESSARY SOFTWARE, FLAT 23” LED SCREEN WITH ACESSORIES QTY-01 NO. SITC DMX CABLING XLR TO XLR QTY-01 NO. SITC OF 8 CORE WIRE CAT 6 FOR LED LIGHTS QTY-01 Set AUDIO SYSTEM: FULL RANGE LOUDSPEAKER REQUENCY RANG (-10 db), SPL (122db SPL PEAK), LONG TERM POWER HANDLING 240W (960 W PEAK) NOMINAL IMPEDANCE 8 ? QTY-06 NOS. POWER AMPLIFIER CONTINUOUS RATED POWER 4000 WATTS QTY-01 NO.

DIGITAL SPEAKER MANAGEMENT SYSTEM FOR ACTIVE EQUALIZATION QTY-01 NO. HARDWARE: SPEAKER MOUNTING BRACKET QTY-06 NOS. CONNECTORS TERMINAL STRIPS IN JUNCTION BOXES, PATCH PANEL, PATCH CORDS,, ETC (LOT) QTY-01 NO. WIRING SYSTEM: LOUDSPEAKER CABLE: 2x2.5 SQ MM COPPER QUALITY QTY-500 mtrs CONNECTOR BOX, MOUNTIG BRACKET OF APPROVED XLR PIN IN CLUDING PATCH CORDS 32 NO. OF 2 M QTY-01 NO. EQUIPMENT RACK DULY PREWIRED QTY-01 NO. SITC OF AUTOMATION CONTROLLER WITH REQUIRED CABLES & CONNECTORS AND REQUIRED LICENCS FOR UNLIMITED NUMBER OF USERS, CENTRAL CONTROL SYSTEM WITH FOLLOWING SPECIFICATION 1) A CENTRALIZED CONTROL SYSTEM IS REQUIRED TO CONTROL THE VARIOUS AV DEVICES LIKE DISPLAY VIDEO METRIX SWITCHER, AUDIO PROCESSOR, BLU RAY PLAYER AND LIGHTING ETC, ALL DEVICES TO BE CONTROLLED FOR DIFFERENT FUNCTIONALITIES THROUGH THE PROCESSOR. 2) THE SPECIFICATION FOR THE CONTROL SYSTEM SHALL BE AS BELOW IT SHALL HAVE MINIMUM 7 BI-DIRECTIONAL SERIAL COMMUICATION PORTS.

IT SHALL HAVE MINIMUM 2 RS485 COMMUNICATION PORTS, IT SHALL SUPPORT RS232, RS485 SERIAL 2 WAY PROTOCOL. SERIAL COMMUNICATION PORT SHALL SUPPORT BAUD RATE UP TO 256K. IT SHALL HAVE MUNIMUM 8 INFRARED PORTS ONBOARD. IT SHALL HAVE MUNIMUM 4 SENSE INPUTS ONBOARD. IT SHALL HAVE MINIMUM 10 RELAY PORTS ONBOARD. IT SHALL HAVE MINIMUM 1 USB PORT ONBOARD. IT SHALL HAVE MINIMUM 1 ETHERNET PORT SUPPORTING POR. IT SHALL HAVE ONBOARD WI-FI TO CONNECT WIRELESSLY & RELIABLY WITHn DETACHABLE EXTORNAL ANTENNA. CONTROL SYSTEM SHOULD BE ABLE TO HAVE REMOTE LOGIC WITHOUT STATIC IP PROCESSOR SHOULD SUPPORT SCHEDULING OF LIGHTS, MEDIA SYSTEMS & OTHER CONNECTED DEVICES. THE CONTROL SYSTEM SHALL HAVE PROVISION TO EXPAND THE SERIAL PORT WITH THE ADDITIONAL EXPANSION CARDS. IT SHALL HAVE ON OR MORE NETWORK ETHERNET PORT FOR NETWORK COMMUNICATION THE CONTROL SYSTEM SHALL SUPPORT INTERCOM FACILITY BETWEEN THE USERS. MAKE-ELANRAKO, XANTECH QTY.-01 NOS.

SITC OF LIGHTING CONTROLS WITH WIRELESS AUTOMATION CONTROL MODULES (WITH REQUIRED CABLES & CONNECTORS) WITH FOLLOWING SPECIFICATION, LIGHTING CONTROL SPECIFICATION 1) A DISTRIBUTED LIGHTING CONTROL SYSTEM IS REQUIRED TO CONTROL THE VARIOUS LIGHTING FIXTURES WITH DIMMING. 2) THE SPECIFICATION FOR THE LIGHTING CONTROL SYSTEM SHALL BE AS BILOW, IT SHALL BE DECENTRALIZED WIRELESS LIGHTING CONTROL SYSTEM WITHOUT CENTRALm PROCESSOR. IT SHALL HAVE FREQUENCY RANGE OF 433.92 MHz, IT SHALL HAVE MOBILE APP TO HAVE INDEPENDENT CONTROL OF LIGHTING WITHOUT THIRD PARTY CONTROL SYSTEM, IT SHOULD NOT REQUIRE MINIMUM LOAD FOR DIMMING, IT SHALL HAVE SURGE & FUSE PROTECTION TECHNOLOGY INBUILT INTO ACTUATOR & DIMMIER, WIRELESS LIGHTING KEYPADS SHOULD HAVE FLRXIBILITY TO WORK WITHOUT POER, ON BOARD CUSTOMIZED SCENE MAKING FEATURETO HAVE FLEXIBILITY TO CHANCE SCENES AT ANY TIME WITHOUT ANY DEPENDENCY, IT SHOULD BE FAILSAFE SOLUTION WITH SINGLE DIMMER/ACTUATOR PER CIRCUIT. MAKE – RAKO/ELAN, VAVIS QTY-50 NOS.

SITC OF WTC BRIDGE FOR LIGHTING CONTROLS WITH REPUIRED CABLES & CONNECTORS FOR CONNECTION WITH SERVER. MAKE – RAKO, ELAN, VAVIS QTY-02 NOS. SITC OF INCEILING SPEAKERS WITH AMPLIFIER WITH FOLLOWING SPECIFICATIONS – IMPEDANCE:- 8 ohms NOMINAL, 6 ohms MINIMUM, POWER HANDLING : - 100 WATS RMS, SENSITIVITY:- 90db SPL (1WATT/1METER), DISPERSION :- 170° HEMISPHERICAL UP TO 10KHz, FINISH:- PAPER SURFACE READY FOR UP TO 1/8” (3mm) FLEXIBLE MATERIAL? AND PAINTABLE, ELASTIC MATERIAL SUCH AS JOINT COMPOUND, PLASTER OR WALLPAPER, OVERLOAD PROTECTION:- THREE INDEPENDENT SELF RESETTING GEL SWITCHES (LOW, MID AND HIGH) ENVIRONMENT TEMPREATURE :- -5° TO 51° C, SPEAKER DEPTH:- 2” (51mm) 3 11/16” (94mm) WITH OPTIONAL ENCLOSURE. SPEAKER AMPLIFIER SPECIFICATION:- NUMBER OF CHANNELS:- 2 (1STEREO PAIR) OUTPUT POWER:- 8 ohms:- 100 WATTS RMS PER CHANNEL (ALL CHANNELS DRIVEN) FREQUENCY RESPONSE:- 5Hz – 50 KHz OPERATING VOLTAGE: -220-240V@50Hz. MAKE SPEAKER, AMPLIFIER – HARMAN, BOSE, BOSCH. QTY-08 SET

SITC OF SERVER PANEL FOR MAIN SERVER IN CONTROL ROOM AND 9 SMALL SERVER PANELS FOR NISHES (ROOMS) (AS PER REQUIREMENT AT SITE) QTY-01 NOS. SITC OF BLU RAY PLAYER TO PROVIDE MEDIA CONTENT FOR ALL DISPLAYS. MAKE – SONY, OPPO, SAMSUNG, PANASONIC. QTY-12 NOS. SITC OF HDMI CABLES: 3 MTRS LONG PROFESSIONAL CABLE. MAKE – OPPO, SONY, SAMSUNG, PANASONIC. QTY-18 NOS. 5 MTRS LONG PROFESSIONAL CABLE. MAKE – OPPO, SONY, SAMSUNG, PANASONIC. QTY-04 NOS. 10 MTRS LONG PROFESSIONAL CABLE. MAKE – OPPO, SONY, SAMSUNG, PANASONIC. QTY-01 NOS. SITC OF AUDIO CABLES (2 CORE 15 GUAGE TIN COPPER SPEAKER CABLE WITH SPECIAL LONG DISTANCE SIGNAL TRANSFER TECHNOLOGY) MAKE – AUDIOQUEST, WYRESTROM, XTRALINK, KRAMER, EXTRON. QTY-08 NOS.

SITC OF DISPLAY MONITOR IN 70” TO 75” SIZE, FULL HD 24 x 7 LED DISPLAYWITH WALL MOUNT BRACKETS. MAKE – SAMSUNG, PANASONIC, LG, NEC. QTY-02 NOS. SITC OF DISPLAY MONITOR IN 50” TO 55” SIZE, FULL HD DISPLAY WITH WALL MOUNT BRACKETS. MAKE – SAMSUNG, PANASONIC, LG, NEC. QTY-03 NOS. SITC OF ULTRA SHORT THROW 3D MAPING PROJECTOR RESOLUTION WUXGA, BRIGHTNESS 5400 TO 7000 ANSL LUMENS, CONTRAST 2,00,000:1? ILLUMINATION SOLID STATE (LASER PHOSPHOR) ILLUMINATION LIF : 20000 HRS. MAKE – CHRISTIE, PANASONIC, EPSOR, SONY, BARCO. QTY-01 NOS. SITC OF 3D HOLOGRAPHIC PROJECTOR RESOLUTION WUXGA, BRIGHTNESS 5400 TO 7000 ANSL LUMENS, CONTRAST 2,00,000:1? ILLUMINATION SOLID STATE (LASER PHOSPHOR) ILLUMINATION LIF : 20000 HRS. MAKE – CHRISTIE, PANASONIC, EPSOR, SONY, BARCO. QTY-01 NOS.