Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.4 LAccepted-AOC RCP GURUDWARA ROAD WARD NO 29 SURATGARH SRI GANGANAGAR 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC Bidder fulfills the requisite criteria and being lowest | |
| 2 | L2₹73.9 L+₹2.2 L (3.04%)Rejected-Finance | L2 | Rejected-Finance Bidder fulfills the requisite criteria but not being lowest | |
| 3 | L3₹75.1 L+₹3.4 L (4.70%)Rejected-Finance | L3 | Rejected-Finance Bidder fulfills the requisite criteria but not being lowest | |
| 4 | L4₹75.4 L+₹3.6 L (5.07%)Rejected-Finance SHIV BARI ROAD NEAR KASUMAL HOTEL BIKANER 334003 RAJASTHAN | BIKANER | BIKANER | RAJASTHAN | 334003 | L4 | Rejected-Finance Bidder fulfills the requisite criteria but not being lowest |
Tender Value
₹77.4 L
EMD Value
₹1.4 L
Closing Date
22 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF BIKANER
HQ CWE AF BIKANER
SHIFTING OF OVERGROUND CABLE TO UNDERGROUND AND UPGRADATION OF POWER SUPPLY CABLE AT AF STN SURATGARH
2023_MES_577034_3
81507/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF SURATGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE AF SURATGARH
₹1.4 L
Yes
9 May 2023
1 Apr 2023
24 Apr 2023
1 Apr 2023
22 Apr 2023
8 Apr 2023
1 Apr 2023 - 6 Apr 2023
Amount
Excavation in trenches in hard/dense soil n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for laying of cables and getting out of excavated material complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and as directed.
Material and labour for sand cushioning below and around cable in trenches with river sand complete all as specified and as directed.
Supply and fixing burnt brick sub class 'B' for cable protection laid adjacent to each other perpendicular to the direction of cable in trenches complete all as specified and as directed.
Material and Labour for cement concreate 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc. including necessary form work and finishing the surface with cement mortar 1:4, 5mm thick finished to the portion of PCC muffs above ground level complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 16 sqmm 4 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 25 sq mm 4 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 35 sq mm 3.5 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 50 sq mm 3.5 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 70 sq mm 3.5 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 95 sq mm 3.5 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 120 sq mm 3.5 core complete all as specified and as directed.
Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 150 sq mm 3.5 core complete all as specified and as directed.
Supply and fixing 100 mm dia GI pipe light grade with necessary fittings in floor /piller/fixed on pole complete all as specified and as directed.
Supply and fixing 80 mm dia GI pipe light grade with necessary fittings in floor /piller/fixed on pole complete all as specified and as directed.
Supply and fixing 40 mm dia GI pipe light grade with necessary fittings in floor /piller/fixed on pole complete all as specified and as directed.
Dismantling existing unserviceable panel and removal from site and Supply and installation LT Electric control panel, cubical type, for out door use, dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick and 2.00 mm thick other parts and angle iron legs of size 50mmx50mmx6mm having front and rear hinged doors with front openable shutters for each MCCB with spreader & extended rotary handle having hinges on one side and locating arrangements with screws type on other sides completely with fully enclosed bus bar chamber, having electrolytic high conductivity insulated bas bar made but of aluminium strips of rating 400 amps for 3 phase, 415 volts, 50 C/S 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter, Ammeter and phase indicator complete, duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete all as ncluding necessary PCC work of height 45 cm from the ground level and equipped with the following items. Note: Drawing and all materials viz MCB/MCCB/ instruments etc. for LT panel shall be got approved by GE before fabrication. Rate for MCCBs, MCBs, instruments is included in unit rate of items :- (Loc : OMQ, SMQ JCO, Living in offr).
Dismantling existing unserviceable panel and removal from site and Supply and installation LT Electric control panel, cubical type, for out door use, dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick and 2.00 mm thick other parts and angle iron legs of size 50mmx50mmx6mm having front and rear hinged doors with front openable shutters for each MCCB with spreader & extended rotary handle having hinges on one side and locating arrangements with screws type on other sides completely with fully enclosed bus bar chamber, having electrolytic high conductivity insulated bas bar made but of aluminium strips of rating 320 amps for 3 phase, 415 volts, 50 C/S 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter , Ammeter and phase indicator complete, duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete all as including necessary PCC work of height 45 cm from the ground level and equipped with the following items. Note: Drawing and all materials viz MCB/MCCB/ instruments etc for LT panel shall be got approved by GE before fabrication. Rate for MCCBs, MCBs, instruments is included in unit rate of items :- (Loc :SMQ 359 to 370, SMQ 318 to 333, Ulas).
Supply, Installation and Commissioning LT Feeder Pillar Box of Size 75x75x45cm Outdoor Type Factory made manufactured by a CPRI approved Manufacturer, made out of 3 mm thick CRCA Sheet and Self Supporting, built upon Rigid Frame Work suitable for 440 Volt 3 Phase 4 Wire System having Front and Rear Hinged Doors with Neoprene Rubber Gasket, Epoxy Powder Coated with Danger Plate, Earthing Strip Point and Bottom Detachable Gland Plate complete with suitable Size Zinc Chromium Plated Nuts, Bolts and Washers, etc. having Colour Code aluminum bus bar inter connections for easy Identification including Incoming/Outgoing Cable Holes at Bottom, provision of six nos connectors and embedded with Mild Steel Angle Iron Frame of Size 50X50X6mm and 450mm above Normal Ground Level complete with PCC Foundation in Cement Concrete (1:2:4) type B1 (20mm Graded Stone Aggregate) and Testing after Instalation including Taking down Unserviceable Feeder Pillar Box with Connected Accessories after disconnecting all Incoming and Outgoing Cables, etc. complete all as specified and comprising with the following :– (a) Aluminium Bus-bar 400 Amp, supported with suitable size of Heavy Duty Porcelain Stand Lock with suitable size of Brass Nut, Bolts and Washer with Heat Shrinkable PVC Sleeving. The Bar shall be Colour Coded (Red, Yellow & Blue) for Three Phases and Black for Neutral. – 04 Nos (b) MCCB, 4 pole, 160 Amps , rupturing capacity 25 KA magnetic thermal release - 01 Nos. (Havells Cat No IHLAN40160 or equivalent in Siemens, Schneider) (c) MCCB, 4 pole, 100 Amps , rupturing capacity 25 KA magnetic thermal release - 01 Nos. (Havells Cat No IHLAN40100 or equivalent in Siemens, Schneider)
Supply, Installation and Commissioning LT Feeder Pillar Box of Size 75x75x45cm Outdoor Type Factory made manufactured by a CPRI approved Manufacturer, made out of 3 mm thick CRCA Sheet and Self Supporting, built upon Rigid Frame Work suitable for 440 Volt 3 Phase 4 Wire System having Front and Rear Hinged Doors with Neoprene Rubber Gasket, Epoxy Powder Coated with Danger Plate, Earthing Strip Point and Bottom Detachable Gland Plate complete with suitable Size Zinc Chromium Plated Nuts, Bolts and Washers, etc. having Colour Code aluminum bus bar inter connections for easy Identification including Incoming/Outgoing Cable Holes at Bottom, provision of six nos connectors and embedded with Mild Steel Angle Iron Frame of Size 50X50X6mm and 450mm above Normal Ground Level complete with PCC Foundation in Cement Concrete (1:2:4) type B1 (20mm Graded Stone Aggregate) and Testing after Instalation including Taking down Unserviceable Feeder Pillar Box with Connected Accessories after disconnecting all Incoming and Outgoing Cables, etc., complete all as specified and comprising with the following :– (a) Aluminium Bus-bar 400 Amp, supported with suitable size of Heavy Duty Porcelain Stand Lock with suitable size of Brass Nut, Bolts and Washer with Heat Shrinkable PVC Sleeving. The Bar shall be Colour Coded (Red, Yellow & Blue) for Three Phases and Black for Neutral. – 04 Nos (b) MCCB, 4 pole, 100 Amps , rupturing capacity 25 KA magnetic thermal release - 01 Nos. (Havells Cat No IHLAN40100 or equivalent in Siemens, Schneider) (c) MCCB, 4 pole, 80 Amps , rupturing capacity 25 KA magnetic thermal release - 01 Nos. (Havells Cat No IHLAN40080 or equivalent in Siemens, Schneider)
Supply and fix 2 core 2.5 sqmm PVC insulated PVC sheathed weather proof multistranded copper conductor cable 1100 volts grade drawn through in GI conduit, pole etc. with MS clamps from junction box to street light fitting complete all as specified and as directed.
Supply and fix 15 mm dia PVC pipe with all fitting from looping box to street light fittings with clamps, nuts & bolts complete all as specified and as directed.
Supply and fix thermoplastic cable junction boxes IP 55/IP 65 with metric knockout for cable entry with terminal of size 240x130x95 mm on pole with MS clamps, nut bolts, washers and glands suitable for 16 sq mm 4 core cable complete all as specified and as directed .
Dismantling ACSR squirel conductor complete all as specified and as directed
Dismantling cross-arms of MS channel or angle section complete all as specified and as directed.
Dismantling insulators any type and any size complete all as specified and as directed.
Excavation of road cuttiug by manually including making good to disturb surface after the completion of work with PCC 1:2:4 type B2 on top not less than 150 mm thick including levelling and cambering according to existing road surface, refilling, watering, ramming etc. complete all as specefied and as directed.
Taking down the unserviceable LT/HT cable of any size from tranches/ walls /floor etc. complete all as specified and as directed by engineer in charge .
Material and labour for PCC in 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required complete all as specified and as directed by engineer in charge.
Material and labour for earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50 metres, PCC pit in 1:3:6 type C-1 (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 40mm bore (light grade) complete all as specified and as directed as shown in electrical plate No 3 of SSR Part-I including testing complete. Note : GI strip and protection pipes 40 mm GI light grade up to 7.5 metre is included in unit rate and beyond that the same will be measured separately.
GURDEEP SINGH AND COMPANY
AJAY ELECTRIC COMPANY
M/s Rohit Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .