Construction of Industrial Housing facility building G plus 5 floors at SIPCOT Industrial Park Irungattukottai in Kancheepuram District

Amount

Labour charges for Cleaning light Jungles

Earth work excavation for foundation in all soils and sub-soils a. 0 to 2 m

Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m

Refilling with excavated earth other than sand with an initial head load of 100 m. and depositing the earth

Supplying and filling in foundation, basement, etc with filling Crushed Stone sand in layers of not more than 15 cm thick

Cement Concrete 1:4:8 using 40mm size hard broken stone jelly

Supplying and filling in foundation, basement, etc with filling Stone Dust in layers of not more than 15 cm thick

MASONARY WORKS Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" a) In foundation & basement

b) In Ground floor

c) In First floor

d) In Second floor

e) In Third floor

f) In Fourth floor

g) In Fifth floor

h) Terrace Floor

Providing and constructing 400 x 200 x 200mm Burnt Clay machine moulded perforated/ hollow modular bricks masonry cement mortar in 1:6 a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third floor

e) In Fourth Floor

f) In Fifth Floor

g) In Terrace Floor

Providing and constructing 400 x 100 x 200mm Burnt Clay machine moulded perforated/ hollow modular bricks masonry in cement mortar in 1:4 a) Ground Floor

b) In First Floor

c) In Second Floor

d) In Third floor

e) In Fourth Floor

f) In Fifth Floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade a) InFoundation and Basement

b) In Ground floor

c) In First floor

d) In Second floor

e) In Third floor

f) In Fourth floor

g) In Fifth floor

h) Terrace Floor

Supplying and erecting steel centering for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps,

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors b) For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

c) For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

d) Vertical walls

Supplying, fabricating and placing in position Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically treated bars Fe - 500 / Fe - 550

Dadooing walls with Granite Tiles - (Superfine Polished with Machine Cut Edges) 10 mm thick of synthetic grey, paradise, and similar varieties of suitable sizes in Cement Mortar 1:2 (10mm thick

Dadooing walls with following best approved quality, white / colour glazed tiles (300x450x8mm) in Cement Mortar 1:2 10mm thick

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 20mm thick

Paving the floor with best approved quality fine polished granite tiles of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 8mm thick using cement mortar 1:3

Paving the floor with best quality Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 20mm thick pointing with Epoxy grout

Finishing the top of Terrace floor with one course of Solar Reflective Ceramic Tiles of size of 305mm x 305mm x 7mm thick

Plastering with Cement Mortar 1:5, 12mm thick

Stucco Plastering 12mm thick using colour Marble chips of size 10mm and below using 72 kgs of cement and 0.15 m3 colour marble chips

Supplying and applying of Wall putty one coat with aproved make wall putty of average thickness 1 mm for smooth finishing

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality

Painting two coats of newly plastered External Emulsion Paint with Water based primer on wall surface of first class quality

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors

Painting the false ceilling / walls with two coats of 1st class ready mixed plastic emulsion paint of best approved quality colour and shade including a priming coat,

Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame

Providing and fixing factory made FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

Supplying and fixing of push and pull type steel Rolling shutters (Manually Operated)

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe

Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of garde M-30 600mm dia

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893

Chipping / Demolition of pile RCC taking care not to damage the balance RCC of piles. For 600 mm Dia. Piles

Supplying and fixing for Hostel furniture arrangements (Individual bed 0.9mx1.9m, Cupboard 0.45mx1.5m, SS Dining Table with Chair -8'x3') a) Individual bed - 0.9mx1.9m

b) Bunk Bed-3x6

c)Cupboard 0.45mx1.5m

d) SS Dining Table with Chair -8'x3'

e) Writing Board type Chair

Providing Sheet covering over expansion joint with irin screws as per design Aluminium Fluted strip 3.15 mm thick and 150 mm wide

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building

Providing in fixing in position 20mm thick bitumen impregnated fibber board

Random rubble masonry in cement motor 1:5 mix using all granite stones and bond stones for foundation and basement

Supplying and laying Rubberised interlocking Paver block M-30, 83mm thick high strength type

Supplying and fixing for Saucer Drain cover for the size of 600mm x 300mm x 75mm

Supply, installation, testing and commissioning of 11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear complete as per specification

Supply, installation, testing and commissioning of 11 KV, 25 KA, 630 A, HT Outdoor Single Panel Vaccum Circuit Breaker complete as per specification

Supply, installtion, testing and commissionig of 250 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2)

Construction of transformer platform including work of earthwork, refilling of stone dust, PCC 1:5:10, Concrate mix M30, form work and required Steel rod

Supply and fixing of Chain link fencing with gate including the TNEB 2 poles Spreading of materials as per CEIG requirements

Transformer yard earthing using copper flat and TWIN earthing asper IS a)Upto 250 KVATransformer sub station

Supplying of HT cables for 185 sq.mm. 3 core HT XLPE 11KV (E)

Supplying of cables, accessories and kits of 185 sq.mm. 3 core HT Cable Outdoor Terminations XLPE 11KV (E) - EPKT 3362

Labour charges for laying of following cable below ground level a) 185 sq.mm.aluminium 3 core HT XLPE 11KV (E)

Labour Charges for laying in trenches on the cable tray /fixing on wall as per requirement. Rate shall include cable tie / clamps a) 185 sq.mm.aluminium 3 core HT XLPE 11KV (E)

Labour charges for following Cable clamps a) 95 to 240 sq.mm

Supplying and fabricating MS support for HT cable supports in RMU,VCB and tansformer

Supply of following safety accessories of approved make a) Hand Gloves 11KV Grad

b) 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

c) Fire Extinguisher Co2, 4.5kg. confirming to TAC Norms

d) 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

e) Shock Treatment Chart fixed in glass frame

f) First Aid Box complete with all First Aid Medicines

g) AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

h) Earth Discharge Rod

i) Danger Board as required by the Electrical Authorities

Labour charges for fixing of safety accessories including cost of necessary tools and plants a) Wireman Grade-I / Electrician Grade-I

b) Electrical Helper

MAIN MV PANEL Supply, Installation,Testing, commissioning of LT panel suitable for 415V, 3 Phase, 50Hz, 4 wire system. Panel ,4P 400A MCCB with Shunt and UV release-2 nos

Design, Supply, Installation, testing and commissioning of cubicle type floor mounting indoor type switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed APFC PANEL with hybrid Harmonic filters .

Supplying and fixing of 8 way vertical TPMCB sheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings

Labour Charges for Installation, testing & commissioning of 8 way vertical TPMCB sheet steel distribution board

Supplying and fixing of 7 Segments (3 Tier) 3 Phase Distribution Board with MCB 8 way TPMCB sheet steel distribution boards

Labour Charges for Installation, testing & commissioning of 7 Segments (3 Tier) 3 Phase Distribution Board with MCB 8 way TPMCB sheet steel distribution boards

Supplying and fixing of 7 Segments (3 Tier) 3 Phase Distribution Board with MCB 8 way TPMCB sheet steel distribution boards

Labour Charges for Installation, testing & commissioning of 7 Segments (3 Tier) 3 Phase Distribution Board with MCB 8 way TPMCB sheet steel distribution boards

Supplying and fixing of Single Phase Distribution Board with MCBs 8 way vertical SPMCB sheet steel distribution boards

Labour Charges for Installation, testing & commissioning of Single Phase Distribution Board with MCBs 8 way vertical SPMCB sheet steel distribution board

Supplying of 2 pole sheet steel enclosure with Single Pole & Neutral 6A to 32A, 10KA

Supplying of 4 pole sheet steel enclosure with Four Pole 6A to 32A, 10KA

Labour Charges for Installation, testing & commissioning of 2 pole sheet steel enclosure with Single Pole & Neutral 6A to 32A, 10KA & 4 pole sheet steel enclosure with Four Pole 6A to 32A, 10KA (10 Nos)

Supplying and fixing of Horizontal Three Phase Distribution Board With MCBS 8 way TPMCB sheet steel distribution board

Labour Charges for Installation, testing & commissioning of Horizontal Three Phase Distribution Board with MCBS 8 way TPMCB sheet steel distribution board

UPS SYSTEM Supply,Testing and Commissioning of 2 KVA single phase in & single phase output, Double conversion Online UPS system with SMF Batteries back up for 2 hours

Labour Charges for Installation, testing & commissioning of 2 KVA single phase in & single phase output, Double conversion Online UPS system

Supply, installation, testing and commissioning of 125KVA Diesel Generator set with AMF panel of approved makes like Kirloskar / equivalent

Labour Charges for Installation, testing & commissioning of 125KVA Diesel Generator set with AMF panel of approved makes like Kirloskar / equivalent as per the new CPCB normsG

EARTHING Earthing Station using Pipe electrode as per IS 3043 using 4.5 m of 40 mm dia and 0.15 m of 19 mm dia B Class. GI pipe

Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.7 m. Class 'B' GI pipe

Supplying and laying of 25mm x 5mm Copper strip at 0.5 meter below ground as strip earth electrode,

Supplying and laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode,

Providing and fixing of 25mm x 5mm copper strip in 40mm dia GI pipe from earth electrode

Providing and fixing of 25mm x 5mm GI strip in 40mm dia GI pipe from earth electrode

Providing and fixing of 25mm x 5mm Copper strip on surface or in recess for connection etc, as required.

Providing and fixing of 25mm x 5mm GI strip on surface or in recess for connection etc, as required.

Providing and fixing of 4.0mm dia copper wire on surface or in recess for connection etc, as required.

Supplying and laying of 6 SWG GI wire at 0.5 meter below ground as strip earth electrode,

Providing and fixing of 6 SWG GI wire on surface or in recess for connection etc, as required.

LT CABLE Supply, laying, dressing, Testing and commissioning of Service Connection accessories L.T. 1100V PVC Aluminium Armoured under ground cable a) 31/2 core 400 sq.mm. PVC Armoured UG Cable

b) 31/2 core 70 sq.mm. PVC Armoured UG Cable

c) 31/2core 25 sq.mm. PVC Armoured UG Cable

d) 4 core 16 sq.mm. PVC Armoured UG Cable

e) 4 core 6 sq.mm. PVC Armoured UG Cable

f) 2 core 6 sq.mm. PVC Armoured UG Cable

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceilingg

Labour charges for laying of following cable below ground level a) Upto 95 Sq.mm

b) 240 to 400 sq.mm

Labour Charges for laying in trenches on the cable tray /fixing on wall a) Upto 95 Sq.mm

b) 240 to 400 sq.mm

LT CABLE TERMINATION Supply & terminating the ends of cables of following sizes using Siemens type single compression cable glands a) 31/2 core 400 sq.mm. PVC Armoured UG Cable

b) 31/2 core 70 sq.mm. PVC Armoured UG Cable

c) 31/2core 25 sq.mm. PVC Armoured UG Cable

d) 4 core 16 sq.mm. PVC Armoured UG Cable

e) 4 core 6 sq.mm. PVC Armoured UG Cable

Supplying of 14 SWG TC Wire for Gland earthing

Labour charges for 14SWG TC wire fixing. Electrical -1 No, Electrical Helper - 1 No)

LIGHTING & SUBMAIN WIRINGS Wiring for light point/fan point /Exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor singleired a) Light point with ceiling rose

b) Light point without ceiling rose

c) Fan point

d) Staircase light point

Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan

Wiring for Circuit / Submain along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed Steel conduit as required. a. 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

b. 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

c. 2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire

Supply, Installation, testing and commissioning of various socket configurations. Rate shall be inclusive of front plate, a) 3 Nos 6A Universal sockets suitable for flat / round pins controlled by 1 no 16A switch.

b) 1 No 6A universal sockets suitable for flat / round pins controlled by 1 no 6A switch.

c) 1 No 6/16A universal sockets controlled by 1 no 16A switch.

Supply, Installation, testing and commissioning of following light and fans fixtures with all support accessories a) 20W 4 Feet LED Fitting with LED

b) 9W LED Bulb

c) 60W LED Street Light Fitting with LED

d) LED Flood Light 100W with Integrated Driver

e) AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator)

f) Ceiling Fan Hook

g) AC Exhaust Fan 300mm (12") Sweep (Light Duty)

Supply and erection 8 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 114.30mm OD x 5.40mm Thick x 4500mm Length, 88.90mm OD x 4.85mm Thick x 1750mm Length 76.10mm OD x 3.25mm Thick x 1750mm Length

supplying and laying of 3Cx1.5 Sqrmm Copper flexible cable for Street light from pole top to bottom termination box.

Supply, installation and commissioning of Weatherproof Synthetic Moulded Compound Box for Street Light

CABLE TRAY Supply and fixing of perforated cable trays of sizes without cover as given below made out of 16 SWG CRCA sheet steel and hot dip galvanized .a) size: 300 x 50mm wide

b)size: 150 x 50mm wide

Supplying and fabrication of MS ANGLES 11/2"x11/2"x1/4" (37.5 x 37.5 x 6.24mm) (1M=3.25 kg)

Supply, Installation, Testing and Commissioning of Ongrid Roof top solar power plant inclusive of 5 years comprehensive maintenance with approved make solar panels manufactured in india (30Kwp On -Grid roof top Solar PV system with 550 wp ),

TV & NETWORK ITEMS Supply and Drawing of UTP 4pair CAT6 LAN cable in the existing surface/recessed steel/PVC conduit as required

Supply and Drawing of Coaxial TV RG 6 Grade , 0.7mm solid copper conductor PE insulated, shielded

Supplying, fixing and concealing of (I/O Socket -higher end) Data socket outlet (RJ45)

Supplying, fixing and concealing of (I/O Socket -higher end) Telephone socket outlet (RJ-11)

Supplying, fixing and concealing of (I/O Socket -higher end) TV Antenna socket outlet (CAT 6 PVC Module Box)

Supplying, fixing and concealing of (I/O Socket -higher end) Face Plate Dual Socket RJ-45

Supplying and laying of 10 pair unarmoured 0.5mm telephone cable

Supplying and laying of 2 pair unarmoured 0.5mm telephone cable

Supply and Installation of 32" TV for continious 24 Hrs operation with associated mounting brackets as required. Make LG/Samsung/Sony/Equvalent

Supply and fixing of 24 Port LAN Network Switch

Supply and laying of 25mm dia PVC rigid pipe all conduit accessories as required concealed in wall and ceiling

Supply and laying of HDPE Pipe 120mm / 103.50mm for road crossing of Electrical & Network cables

Providing scaffolding arrangments for fixing of cable tray in duct upto 13m

Labour for Earth Excavation for electrical cables upto 600mm depth 450mm width and refilling with excavated soil.

Supply and laying of 25mm PVC rigid pipe all conduit accessories as required in wall and ceiling

Supply and laying of 32mm PVC rigid pipe all conduit accessories as required in wall and ceiling

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity

Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube

Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug

Supplying and fixing heavy duty 15mm CP shower unit comprising of CP 15mm dia hot & cold mixer with CP spout, overhead shower set

Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials

Supply and fixing of white colour viterous china Urinal with push cock for flushing

Supply and fixing of Stainless steel Double bowl sink of size 1200 x 550 x 180mm with drain board manufactured from 1 mm thick

Supply and fixing of 15mm CP Long body bib cock,

Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, a) 75mm dia (6kg/sq.cm pressure rated - Type - B)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

c)160mm dia (6kg/sq.cm pressure rated - Type - B)

Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 a)40mm dia (10kg / sq.cm)

b)50mm dia (10kg / sq.cm)

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality,

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11, upto 50mm dia CPVC SDR-11, above 50mm dia CPVC sch-80 having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe a) 20 mm dia

b) 25 mm dia

c) 32 mm dia

d) 40 mm dia

e) 50 mm dia

f) 65 mm dia

g) 80 mm dia

Supplying & fixing in position first quality & approved variety of various dia Brass Ball Valves a) 20 mm dia

b) 25 mm dia

c) 32 mm dia

d) 40 mm dia

e) 50 mm dia

f) 65 mm dia

g) 80 mm dia

Providing and fixing gun metal Non- return valve of approved quality (screwed end) : a) 40 mm nominal bore

b) 50 mm nominal bore

c) 65 mm nominal bore

d) 80 mm nominal bore

Providing, installation, testing and commissioning approved make CI Y-type Strainer conforming to IS standard 80 mm nominal bore

Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, a) 75mm dia (6kg/sq.cm pressure rated - Type - B)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

c)160mm dia (6kg/sq.cm pressure rated - Type - B)

d) 200mm dia (6kg/sq.cm pressure rated - Type - B)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11, upto 50mm dia CPVC SDR-11, above 50mm dia CPVC sch-80 having thermal stability for hot & cold water Providing, a) 20 mm dia

b) 25 mm dia

c) 32 mm dia

d) 40 mm dia

e) 50 mm dia

f) 65 mm dia

g) 80 mm dia

Providing and fixing in position PVC Vent cowls of following dia of best approved quality . a) 110 dia

Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mm thick M.S. plate of size 300 x 300mm plus dia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. a) 32 mm dia

b) 40 mm dia

c) 50 mm dia

d) 65 mm dia

e) 100 mm dia

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) 100x100 mm size P type

Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., . 600x600 mm size internal and depth will 450mm to 1200mm

Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm)

Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, a)75mm dia (4kg/sq.cm pressure rated - Type - A)

b)110mm dia (4kg/sq.cm pressure rated - Type - A)

c)160mm dia (4kg/sq.cm pressure rated - Type - A)

Providing, fixing and testing of Terrace Rain water outlet (160dia) with all the accessories etc,.

Construction of percolation well / rain water harvest pit of 1.2 m dia and 3m deep with precast RCC rings,

Supply , fixing and commissioning of Hydropneumatic pumps (1 working and 1 standby) Vertical in line type for pumping the water from underground sump

Supply , fixing and commissioning of Transfer pumps (2working and 1 standby) Vertical/ Horizontal in line for pumping the water from Treated water underground sump to Domestic water overhead tank

Sewage Treatment Plant : Design Capacity - 100.00 Cu.M / Day Operating Duration - 24 Hrs Design, Engineering, and providing all equipment / machinary at site, installation and commisioning of equipments/ electricals/ piping . STP Plant : 100 KLD

Drinking Reverse Osmosis Plant -50 Lph Design, Engineering, and providing all equipment / machinary at site, installation and commisioning of equipments/ electricals/ piping

Supplying, installing, testing and commissioning of Hot water return pumps (1no working).

Supply, installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall

Supply, installation, testing and commissioning of Local scare alarm

Supply & Installation & Commissioning of 1/3'' CMOS,1280x960:25fps(P)/ 30 fps(N), 0.01lux/f1.2, 4mm/f1.8 lens, Electronic Day/Night Network Dome Camera (with mounting bracket adjustable type)

Supply & Installation of Network Video Recorder with 4HDDs Storage Capacity, 32-Channel Video, 2 Client Licenses, & supports H.264 Compression, Real time Surveillance, With 2 CIF Resolution 25 FPS for 80 Cameras

Supply & Installation of 10 TB hard disk (30 Days backup)

Supply & Installation of 32" LCD TV

Supply & Installation of 24 Port Layer 2 manageable POE Network switch (24 PORT-10/100 BASE-T & 2 NOS. 1-G COMBO PORT FOR UPLINK)

Supply & Laying of CAT6 SL Series Patch cords Panel Side

Supply & Laying of CAT6 SL Series Patch cords Camera Side

Supply & Laying of (Combo D-RJ45 CAT6E Lan I/O Network Keystone Jack, Gang Box, Single Port faceplate panel side

Supply & Laying of (Combo D-RJ45 CAT6E Lan I/O Network Keystone Jack, Gang Box, Single Port faceplate camera side

Supply & Laying of CAT6 UTP Cable with PVC conduit

Supply, Installation,of Hand held & Automatic Fire Extinguisher - CO2 - 4.5 Kg with suitable Metal Floor stand MS fabricated painted in black colour

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity

BOOSTER PUMP Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM

Auto cut off on panel for the above pump with necessary cable & fittings.

Supply ,laying testing and commissioning of M.S black pipes of class 'C'. The pipe should confirm to IS 1239 with required attachments . a 150 mm dia

b 100 mm dia

c 80 mm dia

d 25 mm dia

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table ‘E’, 150 mm

Supply, installation, testing and commissioning of Butterfly valves of following sizes with non rising bronze spindle cast iron body flanges drilled to IS 1538 PN 1.6 grade complete , as per IS 780 etc complete. 150 mm

Supply, installation, testing and commissioning of `Y' - Type Strainer with Flanged ends of following sizes a) 150mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, 25 mm

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe

Supply ,installation, testing and commissioning of Servicing the First Aid Hose Reel Drum

Design, supply, Delivery, installation and commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS/Equivalent) of capacity 13 persons / 5. Number of Floors: 6 (Ground + 5 upper floors)

VIJAYMURALI BUILDER (BID ID -1075803)

KUMARAN ASSOCIATES (BID ID -1081761)

Namakkal Constructions (BID ID -1081514)

Bidder Name

EEE PEE S AND CO

KUMARAN ASSOCIATES

VIJAYMURALI BUILDER

Namakkal Constructions