ARMO works at FSD Manmad during the year 2026-27 (SH- Repairs to rolling shutters, godown ancillaries and other misc repairs including pre-post monsoon repairs)

Repairing of roof of godowns with water proofing material such as Bitumen felt/bitumen/tarplastic or any other water proofing material etc approved by the Engrin charge with and including replacement of bitumen washer and tightening of 'J' hooks & nuts wherever required ( Details of cost for 5000 MT capacity godown) for full period of contract.

Repairing and maintenance of G.I. profile sheet roofing of godown with material such as silicon sealent, self drilling / tapping screws of size 5.5x55 mm with EPDM seal , including greasing of turbo ventilators as and when required during the contract period complete as per the directions of Engineer in charge. (Details of cost for 5000 MT capacity godowns)

Cleaning of internal drains, Nallah storm water drains (of all sizes) etc for smooth flow of water including disposal of rubbish outside the premises with all leads and lifts as per direction of Engineer in charge.

Cleaning chambers/ manholes of all sizes including horizontal pipes inside godowns and on platform of godowns including getting earth, rubbish etc and disposal outside the depot premises in the authorised dumping ground for easy drain out of rain water from valley gutters as per direction of Engr in charge.

Cleaning valley gutters along centre of godowns of old design at height about 18 feet by removing dust etc including disposal outside the depot premises in the authorised dumping ground for easy drainout of rain water as per directins of Engineer in charge.

Providing and fixing 6 mm AC sheet in roofing including dismantling damaged / broken AC sheets upto any pitch and fixing with polymer coated 'J' or 'L' hook bolts& nuts 8 mm dia G.I. plain and bitumen washer etc. complete as per direction of Engineer in Charge including cutting sheets to required size and shape whereever required and stacking the dismantled AC sheets etc complete.

Providing and fixing ridges and hips in asbestos cement sheets roofing close filling adjustable ridgescomplete all as directed by Engr in charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating120grams per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500-600 mm)

Repairing and Greasing of rolling shutters at the rate of 500 grams yellow cup grease of good quality each shutter after cleaning with Kerosene oil properly including tensioning of springs / replacement of spring wherever required including replacement of damaged stripes and side guides koni complete and making easy push & pull operation and removing the top cover and refixing the same after greasing with all materials and labour etc., complete as directed by Engineer-in-charge. (Twice in a year).

Supply of springs of grade No. 2 of 45 cm length( Internal dia 10 cm minimum) , of Minimum wt 6.00 kg, made out of 6 mm dia rod including loading, unloading and transportation at site and inclusive all taxes except GST etc. complete.