SPECIAL REPAIRS TO CSD CANTEEN AND STORE ROOM ADJACENT TO PAY SECTION IN GROUND FLOOR AT CDA CHENNAI AND ADDITION/ ALTERATION TO TOILET (OFFICERS) IN GROUND FLOOR OF BUILDING NO. P-27 UNDER GE CHENNAI

Amount

B/R ITEMS

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation or for shafts, wells, cesspit, manholes etc., n.exc 10sqm on plan and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for reinforced cement concrete (1:1½:3) type A-1 using 20mm and below graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L precast reinforced cement concrete (1:1½:3) type A-1 using 20mm graded stone aggregate as in manholes cover slabs/ OHT base slab on roof and set in cement mortar (1:6) including demolition of old cover/ base slabs complete all as specified and directed.

M&L for brick work with fly ash bricks (old size) straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with fly ash bricks (old size) straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for rounding to edges of stone slabs, such as in steps, cooking platform and other similar situations all a specified and directed.

M&L for 18-20mm thick machine cut granite slab (of any type), laid over and including 15mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement and marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc. 4sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick of flat rough finished surfaces of concrete all as specified.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, supplying and fixing in frame at site including provision 02 Nos 125mm size aluminium anodised handles, 03 Nos 100mm mild steel hinges & 02 Nos 150mm size aluminium anodised tower bolt of extruded section for each shutter all as specified, directed and shown in sketch for item No. 8101 in SSR Part-II complete.

M&L 100mm size medium weight cold rolled mild steel butt hinges all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section all as specified and directed.

S&F 150mm size extruded aluminium handle, cast type, anodized all as specified and directed.

S&F aluminium alloy anodized sliding door bolts; 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F 75mm size, 4 lever grade 1 brass lock for drawer, cupboard shutter etc. all as specified and directed.

S&F brass handle for drawer, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S&F 40mm dia cupboard knob of brass fifed with nut, screw and washer complete all as specified and directed.

S&F aluminium (die cast body) door closer hydraulically regulated designation No. 1 universal type suitable for door shutters upto 700mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F aluminium (die cast body) door closer hydraulically regulated designation No. 2 universal type suitable for door shutters 701 to 850mm in width and of weight between 36 to 60kg and fixed complete all as specified and directed.

S&F aluminium powder coated designer curtain rods (drapery rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

S&F powder coated aluminium sliding window having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium section (three track) weighing not less than 0.495 Kg/ RM for frame work and 0.48 Kg/ RM (interlock) for shutters fixed with sash bars, aluminium anodised snap beads, screws including three sliding shutters, two fully glazed shutters with 5.0mm thick tinted glass fixed with glazing clips anodised and rubber packing and one wire mesh shutter with aluminium alloy wire mesh, fixed with necessary jointing cleats aluminium snap beads, screw, roller interlocking handles etc. complete all as specified and directed. Note: Measurement shall be the size of opening and the unit rate quoted shall be deemed to include the cost of aluminium sections, glass sheets, wire mesh, builders hardwares etc.

S&F powder coated (minimum thickness of powder coating 50micron) aluminium door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and shutters of section not less than 0.48 Kg/ RM (inter lock) fully glazed with 5mm thick tinted glass including necessary jointing cleats, glazing clips, rubber packing anodized aluminium snap beads, screw, roller inter locking handles complete all as specified and directed.

S&F aluminium section partition of 50mm x 50mm cross section 1mm thick with panel inserts of 12mm thick pre-laminated particle board of external grade with decorative laminates on both sides fixed with sash bars aluminium anodised snap beads, screws and aluminium partition doors shall be fixed alongwith partition wall on same section but partly glazed with 5mm thick glass fixed with glazing clips etc. including supply and fixing necessary builders hardware such as hinges, bow handles etc. complete all as specified and directed.

S&F in repairs powder coated aluminium ventilators having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium sections weighing not less than 0.48Kg/ RM for frame including powder coated aluminium louvers, snap beads, screws and fixed with 5.0mm thick frosted/pin headed glass, necessary jointing cleats, glazing clips including one wire mesh shutter fixed on frame with stainless steel wire mesh, builders hardware such as hinges, bow handles, locking arrangements etc., complete all as specified and directed. Note: Measurement shall be the size of opening and the unit rate quoted shall be deemed to include the cost of aluminium sections, glass sheets, wire mesh, builders hardwares etc.

S&F mild steel work as in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, including fencing post etc. and similar works conforming to grade Fe-290 Gde-E-165 complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handle etc. as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and directed.

S&F continuous piano hinges mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

M&L for 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one both faces including 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved fixed with apporoved adhesive to timber frame work as per manufacturer's instructions complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc. or insulation boards/ slabs, blankets; of any thickness including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid size of grid 605mm x 605mm framework for false ceiling including 6mm dia GI suspenders/ hangers upto 1200mm length for adjusting level fixed to roof slabs by means of ceiling cleats made of GI flat 40mm x 3mm of 60cm length complete all as specified and directed.

M&L providing gypsum board false ceiling using 12mm thick gypsum board tiles of size 60cm x 60cm with aluminium laminate finish on one side and vinyl laminate finish on other side, fixed with screw on aluminium snap grid complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tile to store complete all as directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and smooth complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per Item No. 61 above but on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

S&F coloured glazed ceramic tiles as in vertical surfaces of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc. including racking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for removing old lime wash, hacking for key, racking out joints of old brick work built in cement mortar not previously plastered and scrubbing down with water etc. to receive plaster complete all as specified and as directed.

M&L for chipping of loose concrete, carefully broken plastering in chajjas, ceiling, fins and facias and applying one coat of rust remover using DR FIXIT rust remover and applying one coat of DR FIXING PIDICRETE concrete MPB bonding agent and Rendering 5mm thick in cement mortar (1:3) as in repairs of chajjas, ceiling, fins, etc., all as specified and directed. Note: Quoted rates shall be deemed to include for cost of rust remover and concrete bonding agent.

M&L for preparation of old treated surface of walls and applying two coats of white wash complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying three coats of white wash including preparation of new plastered surfaces of walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex of Asian or Weather coat of Berger or equivalent of other specified makes) over a coat of exterior sealant and white primer complete all as specified and as directed.

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over a coat of alkali-resistant priming paint over and including a coat of 3mm thick wall care putty on wall surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper over and including a coat of primer and a coat of 2 to 3mm thick wall care putty including preparation of newly plastered or previously un-treated surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint for wooden or wood based surface of any description exc. 10cm width or girth over a coat of pink primer including preparation of new wooden surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface any description exc. 10cm width or girth including preparation of surface complete all as specified and directed.

S&F galvanized steel water tubing medium grade 15mm bore ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ ceiling or laid in floors etc., complete all as specified and as directed.

S&F galvanized steel water tubing medium grade 20mm bore ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ ceiling or laid in floors etc., complete all as specified and as directed.

Supply and laying 16mm dia CPVC pipes SDR 11 & plain CPVC fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supply and laying 20mm dia CPVC pipes SDR 11 & plain CPVC fittings on walls/ ceiling or laying in floors complete all as specified and directed.

S&F 15mm bore chromium plated overhead shower rose with arm and wall flange complete all as specified and directed. Make: Parryware cat No. T9927A1 or equivalent from other makes specified in particular specifications.

S&F 15mm dia bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed. Make: Parryware cat No. G0204A1 or equivalent from other makes specified in particular specifications.

S&F 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. Make: Parryware cat No. G0202A1 or equivalent from other makes specified in particular specifications.

S&F 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. Make: Parryware cat No. G4002A or equivalent from other makes specified in particular specifications.

S&F 15mm dia angle valve cast copper alloy screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and directed. Make: Parryware cat No. T9960A1 model Jade Mini or equivalent from other makes specified in particular specifications.

S&F 150mm square PTMT grating fitting made in two parts for smell and mosquito proofing with minimum 25mm water seal (Minimium weight 85gms) all as specified and directed.

S&F health faucet (hand shower) with 1metre flexible tube with wall hook, chromium plated complete all as specified and directed. Make: Parryware Cat No.T9961A1 or equivalent from other makes specified in particular specifications.

S&F health faucet (hand shower) with 1metre flexible tube with wall hook, chromium plated complete all as specified and directed. Make: Parryware Cat No.T9962A1 or equivalent from other makes specified in particular specifications.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality with washers complete all as specified and directed.

S&F 15mm PVC connection 450mm long with brass unions and washers complete all as specified and directed.

M&L for vitreous china wash down water closet (pedestal pattern) white with including white coloured PVC seat cover (excluding flushing cistern and flush pipe) complete all as specified and directed. Make: Parryware model Elite Cat No. C0278 or equivalent from other makes specified in particular specifications.

M&L for vitreous china wash down water closet (pedestal pattern) white with including white coloured PVC seat cover (including flushing cistern and flush pipe) complete all as specified and directed. Make: Parryware model Cascade NXT Cat No. C0232/86 or equivalent from other makes specified in particular specifications.

S&F 32mm bore PTMT waste coupling (half or full threaded) (Minimum weight 45gms) all as specified and directed.

Supply and fix PVC valveless syphonic action type low level flushing cistern, 10 litre capacity, white complete accessories like inlet, ball valve, float and handle, brackets, PVC flush pipe, over flow pipe etc. complete all as specified and directed.

S&F 125mm/ 110mm bore PVC (SWR) 'P' trap complete all as specified and directed.

S&F 125mm/ 110mm bore PVC (SWR) 'S' trap complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm (excluding taps, waste, chain and plug and porcelain stopper) but including brackets and 32mm dia PTMT waste coupling complete all as specified and directed.

S&F vitreous china wash basin white flat back size 500 x 400mm x 185mm including brackets complete all as specified and directed. Make: Parryware Cat No. C041B model Indus Standards or equivalent from other makes specified in particular specifications.

S&F PVC waste pipe of size 31/ 32mm dia x 800mm length all as specified and directed. Make: Prayag Cat No. 327 or equivalent from other makes specified in particular specifications

S&F toilet paper holder with flap recessed type matt chromium plated as per cat No. T6514A1 of Parryware or equivalent from other makes specified in particular specifications all as specified and directed.

S&F soap dish, matt finished, chromium plated (MCH/ colour) as per cat No. T6403A1 of Parryware or equivalent from other makes specified in particular specifications all as specified and directed.

S&F brass chromium plated towel ring all as specified and as directed. Make: Parryware, Cat No. T6002A1 or equivalent from other makes specified in particular specifications.

S&F towel rail 600mm long between flanges, brass chromium plated fixed with brass screws all as specified and as directed. Make: Parryware, Cat No. T6001A1 or equivalent from other makes specified in particular specifications.

S&F glass shelf matt finished chromium plated (MCH/ colour CP) with bracket end fittings as per Cat No. T6009A1 of Parryware or equivalent from other makes specified in particular specifications all as specified and directed.

S&F corner glass shelf 300mm, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. ACN-1173 of Jaquar or T6010A1 of Parryware or Cat No. BEA-44 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends suitable for 110mm bore of any radius all as specified and directed

S&F PVC (SWR) bends suitable for 75mm bore of any radius all as specified and directed

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains upto 150mm dia and making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate smooth finished, & reforming benching as required complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons and removing rubbish to outside MD land complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises to outside MD land, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises to outside MD land, complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 thick using 12.5mm graded stone aggregate finished fair and even complete all as specified and directed.

Demolition & breaking up 100mm bore drain pipes (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and directed.

Cutting holes in into or through brick wall of superficial area n. exc. 150sqcm built in cement mortar or cement lime mortar and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish outside MD land complete all as specified and directed.

E/M ITEMS

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including 20mm bore non metallic rigid PVC conduit medium grade, ISI marked, with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board including taking down existing point wiring complete all as specified and directed.

M&L for point wiring for one light point controlled by one switch complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including 20mm bore metallic rigid PVC conduit medium grade, ISI marked, with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly including taking down existing point wiring complete all as specified and directed.

All as per item No. 109 but for one fan point controlled by one switch through regulator.

All as per item No. 109 but for one 3 pin socket outlet on independent board.

All as per item No. 109 but for one 3 pin socket outlet on the same board with other switches.

Supply and fix switch socket combination, 2 in 1, 15 Amps, 230 volts flush type all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts.

S&F switch socket combination, 2 in 1, 5 Amps, 230 volts flush type all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm; 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix stepped type electronic ceiling fan regulator all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 42, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S&F connecting and testing isolator MCB of rating of 230 Volts, SPN, 63 Amps, including taking down the existing one complete all as specified and as directed.

S&FAC metal box with 20 Amps MCB including taking down the existing one complete all as specified and as directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 40 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

S&F 34 watts environment friendly, new generation, aesthetically, ultra modern designed recess mounting luminaire with high brightness SMD LEDs as light source suitable for ceiling all as per Cat No. PLUTONEO2X2 PLR34WLED857S of Havells or equivalent of other specified makes fixed to ceiling including taking down the old fitting complete all as specified and directed.

S&F wall mounted LED batten 10 Watts LED 6000K (600mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including 10Watts LED tube light all as per Cat No. ENDURALINEARNEO BS10WLED 865SPCWH of Havells or equivalent of other specified makes fixed on surfaces of waall or ceiling including taking down the old fitting complete all as specified and directed.

S&F wall mounted LED batten 20 Watts LED 6000K (600mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including 20Watts LED tube light all as per Cat No. ENDURALINEARNEO BS20WLED 865SPCWH of Havells or equivalent of other specified makes fixed on surfaces of waall or ceiling including taking down the old fitting complete all as specified and directed.

S&F wall mounted LED batten 22 Watts LED 6000K (1200mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including 22Watts LED tube light all as per Cat No. ENDURA LINEAR NEO BS22WLED865SPCWH of Havells or equivalent of other specified makes fixed on surfaces of waall or ceiling including taking down the old fitting complete all as specified and directed.

S&F high speed BEE 5 star rated standard plain ceiling fan of 1200mm sweep (colour as approved by GE) 230V, 50HZ single phase fixed with suitable clamp and down rod (GI Pipe) including drilling, bolts and nuts complete all as specified and directed.

S&F exhaust fan 300mm sweep, AC single phase 230/ 240 volts, heavy duty corrosion resistant body rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 complete all as specified and directed.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 6.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

DJ Group