GE/863/EWS-T-52 OF 2025-26 SPL REPAIR TO BLDG NO T-81(OTM)INCL TOILET, T-106 OF HQ 136(I) INF BDE C

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed by Engr in Charge.

S & F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to I.S.1161- 1979 Fe 410-W (GdeE- 250) complete all as specified and as directed by Engineer-In-charge

S & F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated)conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed by Engr in Charge..

S&F Pre-painting galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr in Charge.

S&F Pre-painting galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr in Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets complete all as specified and directed by Engr in Charge.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed by Engr in Charge.

-Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr in Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr in Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr in Charge.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed by Engr in Charge.

Ditto- all as above but except timber complete all as specified and directed by Engr in Charge.

M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed by Engr in Charge.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed by Engr in Charge.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr in Charge.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in coping complete all as specified and directed by Engr in Charge.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in Charge.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr in Charge.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr in Charge.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks complete all as specified and directed by Engr in Charge.

-Ditto- all as per item above but 75mm long.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane complete all as specified and directed by Engr in Charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr in Charge.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engr in Charge.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr in Charge.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregateas in floor, including rough finished with out using extra cement complete all as specified and directed by Engr in Charge.

S& F for providing and fixing powder coated aluminium (minimum thickness of powder coated 50 micron) work for doors, windows, ventilator and partitions (Fixed portion) with extruded build up statndard tubular sections/ appropriate Z sectins and other sections of approved make conforming to IS : 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at jucntions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium section shall be smooth, rust free, straight, snap beading for glazing/panelling, CP brass/stainless steel screws, complete all as specified and directed by Engr in Charge.

S&F anodised aluminium door shutters, aluminium section wei

ITEM NO-63

ITEM NO-83

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed by Engr in Charge.

ITEM NO-85

ITEM NO-88

ITEM NO-92

ITEM NO-93

ITEM NO-94

All as per Srl item No 97 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

ITEM NO-99

Supply and fixing of switch piano type 6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type single pole one way complete all as specified and directed by Engineer -in-Charge,

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr in Charge. Make : Anchor/leader/havells

Supply and fixing surface & wall mounted LED 10 W tube light fitting batten, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Havells / Philips / Crompton

Supply & Fixing LED SQUARE Slim compact ,aluminuim die cast edge lit pannel,Recess mounted Square fixture with opal diffuser and separater eletronic driver LED 6500 K 15 Watt with best in class design for long lasting performance connected with copper conductor cable of suitable size complete all as specified and directed by Engr in Charge.Make Havells/Bajaj/Crompton.

Supply & Fixing LED light fitting 1 x 9 W/1 x 10 W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge. Make havells/Bajaj

Supply and fixing 9 watts LED lamp all as specified and directed by Engr-in-Charge. Make: Havells

S&F in replacement exhaust fan, Steel body AC Single Phase, 230V of size 300 mm sweep, with blade and frame and louvres. complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 08 way 240 volt complete all as specified and directed by Engineer-in-Charge

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 12way 240 volt complete all as specified and directed by Engineer-in-Charge

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr in Charge. (i) SP 5 to 32 AMP

(ii) SPN 40 to 63 AMP

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular complete all as specified and directed by Engr in Charge.

Supply and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. Grade), with two nos of suitable size of clamp,nuts, bolts and wahers etc fixed to GI sheet roof complete all as specified and directed by Engr in Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions complete all as specified and directed by Engr in Charge.

Supply and fixing recessed mounting 36 W 3000K (Warm) 2 x2 panel luminaire with high performance LEDs suitable for mounting with Grid ceiling 2x2 incl driver complete fitting , all as specified and directed by Engr-in-Charge. Make: Crompton / Havells / Wipro

Supply and fix in replacement LED Batten 20W , 4 ft (Approx) length ultra slim square profile with extruded polycabonate, enviromenental friendly, energy efficient , connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed by Engr in Charge. Make- Havells / Philips / Crompton

Supply and fixing 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed by Engr in Charge. Make: Havells

Supply & Fixing LED Bldg security light fitting 30 Watt with best in class design & robust heat sink along with class leading IP 65,IK & surge protection for long lasting performance connected with copper conductor cable of suitable size complete all as specified and directed by Engr in Charge. Make Havells/Bajaj/Crompton.

Material and Labour street light bracket made out from GI Pipe 32 / 40 mm bore light grade 1.20 meter long bent to required shape and fixing to poles etc including fixing of clamps, nuts, bolts etc complete all as specified and directed by Engr in Charge.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in onduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engr in Charge.

S&F in replacement exhaust fan, Steel body AC Single Phase, 230V of size 450 mm sweep, with blade and frame and louvres. complete all as per specified and directed by Engineer-in-Charge.