Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹82.0 L+₹1.4 L (1.72%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹86.3 L+₹5.7 L (7.05%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹1.0 Cr+₹20.3 L (25.2%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹1.0 Cr+₹20.3 L (25.2%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
13 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
STRUCTURAL REPAIR AND MS WORK SS RAILING, MICRO CONCRETE, CEMENT WORK AT DRY DOCK NAVAL DOCKYARD UNDER GE (NW) KUNJALI, COLABA, MUMBAI
2024_MES_641437_1
8303/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Kunjali
Class B
Category a (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹2.1 L
Yes
28 Mar 2024
8 Feb 2024
15 Mar 2024
8 Feb 2024
13 Mar 2024
29 Feb 2024
8 Feb 2024 - 28 Feb 2024
Amount
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engr-in-charge.
Material and labour for rolled mild steel Sections as in post, runners, refter, purlins, truesses, steps etc fixed with connecting plates including bending, welding etc conformingto Fe 410-W (Gde-E-250) quality-A complete all as specified and directed by Engr-in-charge.
Supply and fixing mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to FE 410-W, (Gde- E-250) quality-A complete all as specified.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.
Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips.
Material and labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
Material & labour for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
Material & labour for Stainless steel ( Grade 316) in ladder, railings, plate, chain etc fixed in staircase, landing etc including necessary welding, buffing/ polishing and fixing including necessary drilling, bolting or riveting and embedding post in concrete complete all as specified and directed by Engr-in-charge. Note - Design and pattern shall be as approved by GE.
Material & labour for Stainless steel decorative railings (grade 316) having 8mm minimum thicknesss as used to connect two SS post with hooks etc complete with and including necessary welding, buffing, polishing and fixing including necessary drilling, bolting or riveting and embedding post in concrete complete all as specified and directed by Engr-in-charge.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and complete all as specified and directed by Engr-in-charge.
Material & labour for brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed by Engr-in-charge.
Material & labour 150mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in floor and finished the surface even and smooth using extra cement complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing debris out side MD land. Note: The place of disposal shall be find out by the contractor.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 mixed with (admixture, synthetic & fibre) in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation complete all as specified and directed by Engr-in-charge.
Material & labour for form work to sides of square, rectangular or polygonal pillars, post, struct, columns for rough finished surfaces of concrete flat.complete all as specified and directed by Engr-in-charge.
Material & labour for errection MS tubler double scaffolding (H frame) upto height of 30m with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls & dismantling and removing the scaffolding complete all as specified and directed by Engr-in-charge.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques using water jet with a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface and removing all sea vegetation complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruments required at site.
Material and labour for applying two coats of solvent free Epoxy primer coat on oil/damp wall using composition of UR Tech CG 2752 and UR Set CG 1054 in the ratio 100:60 Parts by weight, Epoxy Primer to be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer will be applied at coverage of 3 to 4 Sqm per kilograms per coat of Epoxy primer, thickness of each coat shall be 120-150 microns complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruments required at site.
Material and labour for applying two coats of anti carbonation paint over vertical concrete surface in jetty/dry dock above sea level complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruments required at site.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 20mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface as direct including removing debries outside MD land complete all as specified. Note:-i) New reinforcement and MS Sections will be measured and paid separately. ii) The place of disposal shall be find out by the contractor.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor from RCC columns, beams, walls, chajja etc and exposing the reinforcement using wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as directed, applying two coats of epoxy zinc primer on new and old steel surfaces and applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finishing the surface as directed including removing debries outside MD land complete all as specified. Note :- i) New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately. ii) The place of disposal shall be find out by the contractor.
Dismantling timber scantlings 40 sq. cm and over in section, in wooden coping from edgges of jetty in unframed work and deposited to MCM store yard complete all as specified.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 3000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 1000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 500 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land. Note :-i) The place of disposal shall be find out by the contractor.
M & L for precast RCC 1:2:4 type B 1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to match complete all as specified and directed.. Note - Reinforcement shall be measured and paid separetly.
M & L for removing covers of any type from the top of covered drains of sectional area exc 0.24 Sqm but n.exc 1 Sqm and cleaning the drain by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils out side MD land including taking precautionary and safety measures and refixing the covers as per existing after cleaning complete all as specified and directed by Engr-in-charge. Note :-i) The place of disposal shall be find out by the contractor.
Supply and fix structural mild steel framed works such as angle, channel, grating, gate, ladder confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed by Engr-in-charge.
Material & labour for complete removal of existing treatment from wall surfaces and applying a coat of wall care putty 3mm thick and applying two coats of oil bond distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge.
Material & labour for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces in ceiling and finishing the surface even smooth without using extra cement complete all as specified and directed by Engr-in-charge.
Material & labour for preparation of newly plastered surfaces in ceiling and applying three coats of white wash complete all as specified.
Material & labour for rendering 20mm thick in two coats (5mm under coat plus 5mm finishing coat in CM 1:4 mixed with water proofing chemical as per manufacturer''s instructions and finishing the surface even and fair complete all as specified. Note -Water proofing Chemical shall be measured and paid seperately
Material & labour for preparation of new plastered wall surfaces over 10cm width or girth and applying two coats of weather resistant emulson (100% acrylic) over a coat of exterior wall primer complete all as specified .
Material & labour for preparation of surfaces by complete removal of existing decorated surfaces of wall over 10cm width or girth and applying two coats of weather resistant emulson (100% acrylic) over a coat of exterior wall primer complete all as specified .
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.
Material & labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof kerbs / padding mixed with water proofing chemical as per manufacturer's instructions and finishing the surface even and fair complete all as specified. Note -Water proofing Chemical shall be measured and paid seperately
Material and labour for rendering 20mm thick cement plaster in CM (1:3) mixed with WPC by 3% of weight of cement on roof top surface and finished even and fair , priming @ 0.8 Kg per sqm of finished concrete surface and applying a coat of cold bituminous at 1 Kg per sqm and applying seating cloth over cold bituminous surface and applying paving bitumen of any penetration at 1.5Kg per sqm complete all as specified and directed by Engineer-in-Charge. Note -WPC shall be measured and paid seperately.
Material & labour for preparing old steel surfaces of any description n.exc 10 cm in width or girth by removal of rust and aplying one coat of antirust liquid over a coat of zinc chrome primer complete all as specified and directed by Engr-in-charge.
Material & labour for preparing old steel surfaces of any description n.exc 10 cm in width or girth and aplying two coats of epoxy paint complete all as specified and directed by Engr-in-charge.
RAJENDRA CONSTRUCTION
ROHIT CONSTRUCTION
Shetty Construction Co
Nilesh Construction
the bhimani group of companies
ROY CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .