Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC AT BARIMAL PO HATIBARI PS SUKINDA DIST JAJPUR PIN 755018 | JAJAPUR | ODISHA | 755018 | ₹13.3 L | L1 | Accepted-AOC Being lowest |
| 2 | L2₹14.0 L+₹77,890 (5.87%)Rejected-Finance | ₹14.0 L+₹77,890 (5.87%) | L2 | Rejected-Finance Being not lowest |
| 3 | L3₹15.1 L+₹1.9 L (14.1%)Rejected-Finance AT AMRITPUR PO NB CHILKA DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | ₹15.1 L+₹1.9 L (14.1%) | L3 | Rejected-Finance Being not lowest |
| 4 | L4₹1.5 L−₹11.7 L (88.4%)Rejected-Finance | ₹1.5 L−₹11.7 L (88.4%) | L4 | Rejected-Finance Being not lowest |
| 5 | L5₹16.1 L+₹2.9 L (21.5%)Rejected-Finance AT BRAJARAJPUR PO INS CHILKA DISTT KHORDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | ₹16.1 L+₹2.9 L (21.5%) | L5 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹26,000
Closing Date
9 Dec 2020, 6:00 pmClosed
Garrison Engineer Chilka
Garrison Engineer Chilka Post INS Chilka Dist Khorda Odisha 752037
PROVN OF BARBED WIRE FENCING AT SOLAPOKHARI AT INS CHILKA UNDER GE CHILKA
2020_MES_391959_1
GE/CHL/8676 OF 2020-21
Open Tender
Civil Works
Item Rate
182 days
Garrison Engineer Chilka
MES Enlisted contractor of Class E category a i
6 documents required · 6 mandatory
₹500
Yes
Garrison Engineer Chilka
₹26,000
Yes
18 Dec 2020
2 Nov 2020
15 Dec 2020
2 Nov 2020
9 Dec 2020
17 Nov 2020
2 Nov 2020 - 10 Nov 2020
Amount
Dismantling posts or struts (wood, steel , RCC) any section, including taking out embeded portion in concrete , brick work, masonry etc and making good disturbed ground complete all as specified and as directed.
Excavating in post holes (or similar holes) , each not exceeding 0.5 cum , getting out, returning, filling in and removing surplus soil to a distance not exceeding 50 m in soft/oose soil complete all as specified and as directed.
M&L cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and as directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and as directed
All as per item No 4 above but 5 mm dia and over upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed
Taking down existing Galvanised steel barbed wire of any type and of any description complete all as specified and as directed. Note : Each line of wire shall be measured.
S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. Note : Each line of wire shall be measured.
M&L for providing reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area not exceeding 100 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed
M/S JAGANNATH SASMAL
PABITRA MOHAN PARIDA
ODRA NIRMAN
BHARAT KUMAR BALL
PRADIPTA KUMAR PANI
D RAVICHANDRAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .