8199 PROVISION OF WATER PROOFING TREATMENT AT ARMOURY AT INS AGNRE AND ADDITION/ ALTERATION OF TOILET IN TRAINING AND RECREATION ROOM AT A 85 BUILDING CASTLE BARRACKS, ANGRE UNDER GE (NW) KUNJALI

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down old tarfelt

M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.

M&L rendering 20mm thick Pre polymer modified ready mixed cement based plastrer in two coats(12mm inner coat 8mm finishing coat). Polymer modified ready mixed cement based plastrer should having min composition of cemne and sand 1:4 using fully treated dry, well graded natural sand confirming to IS 383 suitable for external plastering having low rebound properties, low water demand for curing proprities, mechanical mixing with water in a metalic tray to only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl making grooves of existing size complete all as specified and directed by Engineer-in-charge.

Supply only integral water proofing compound complete all as specified.

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc.

M&L for applying 1.5mm thick modified bitumen waterproofing membrance with cross laminated HDPE film for wet application on the roof. The membrance shallbe applied after making concrete wall in saturated surface dry condition and applying a bonding slurry. The membrane is the unrolled and pressed into the fresh slurry after removal of the release liner. Both long and shoth edges of the membrane are overlapped by min 80mm and firmly pressedtogether using a roller with staggered overlaps. The membrane shall have a tensile strength -25Mpa according to ASTM D412; elongation ~500% according to ASTMD 412 resistance to static puncture ~900N according to ASTM E 154: adhesion in peel ~1.8N/mm according to ASTM D 903 mod; resistant to lateral water migration ~71 m according to ASTM D 5385 mod.

M &L for machine cut kota stone slab flooring 18-20mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl incl 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F Cement concrete tiles 300 x 300 x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and pegments in floors, and cut and polished incl 20mm thick screed bed in CM 1:4 complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3.

M&L light shade double charged virified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing.

S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, as directed by Engr- in- charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F Stainless steel butt hinges 100 mm.

S & F Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore

S & F 15 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc

S & F 20 mm bore UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc

S&F in repair fancy type CP stop/angle cock of 15 mm dia, screwed for iron pipe and fixed as per sample and directed by Engr-in-Charge.

S&F in repair fancy type bib cock 15 mm dia, screwed for iron pipe and fixed complete as directed by Engr-in-Charge.

S&F in repair fancy type CP Pillar taps 15 mm dia, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F 450mm PVC connections 15 mm size with PTMT nuts

S&F 600mm PVC connections 15 mm size with PTMT nuts

Supply and fixed in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union.

S&F of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified.

S&F PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe),

S&F CP towel rail 600 mm long with round flange complete all as specified and as directed

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S & F in repairs Stainless steel soap dish holder fixed with suitable screw as per sample and complete directed by the Engr-in-Charge.

S&F in repairs coner glass shelf incl bracket fixed with suitable screw as per sample and complete directed by the Engr-in-Charge.

S&F mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100mm dia pipe.

S & F 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls.

S & F 75mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls.

S & F PVC (SWR) bends 110 mm

S & F PVC (SWR) bends 75 mm

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia.

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and joints are in cement or rubber gasket of 150/160mm dia pipe.

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 160 mm dia bore PVC (SWR) bends including fixing with ciment/ rubber ring etc complete all as specified and as directed .

S&F 1mm thick, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Removing any kind of debris including loading in truck (more than 3 Ton) and conveying day to day basis to approved dumping point i.e @ urban / industry loading spreading etc. complete with all leads and lifts (lead 50km) Market Rate

M&L for applying 1 to 2 mm thick wall care putty for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed.

Preparation of newly plastered surfaces of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including necessary scaffolding for high raise bldg complete all as specified and as directed

M&L for preparation of newly or priviously untreated cement concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat complete all as specified.

M&L for preparation of newly steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L complete removal of existing treatment of old decorated surfaces of walls and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated surfaces of ceiling and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated surfaces of wall and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including necessary scaffolding for high raise bldg complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of old painted cement concrete surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge.

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly including required nos and size of modular box with cover plate frame in any module, ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One light point controlled by one switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly with an including required size of PVC modular box with cover plate for one 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note : (a) Colour coding shall be followed as (i) Phase-Red/Blue/Yellow (ii) Neutral -Black (iii) Earth - Green (b) Switch socket measured and paid separately (iv) Make of wire : Polycab/Plaza/Havells/Gloster (v) Make of PVC casing capping/Conduit : Precision /pesto plast / National / Plaza

M&L ceiling rose surface bakelite 65x50mm, flush type , 3 terminals complete all as specified and directed by Engr-in-Charge.

Supply and fix modular switch 1 way 6 Amps 1 module 240 volts all as specified and directed. Make: Roma/Legrand

Supply and fix modular switch 1 way 16 Amps 1 module 240 volts all as specified and directed. Make: Roma/Legrand

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

S&F Modular fan step regularor, 120W, 2 module all as specified and directed by Engr-in-Charge

Supply and fixing of ceiling fan 1200 mm sweep, BLDC, five star rating complete all as specified and directed.

Supply and fixing heavy duty exhaust fan 300mm sweep , 240 volt 50 HZ AC, 1300 rpm including louvers complete all as specified and directed.

S&F in repair LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess/ceiling mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.Make : Havells/crompton/phillips

Supply and fixing in repair walll/surface mounted 20W LED batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : CG/wipro/C&S cat No LTTB4F20WLEDEW BATTEN/Bajaj/Havells/Philips

Supply and fixing in repair walll/surface mounted 1 X 10 W LED batten fitting, 2 feet surface mounted plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed by Engr-in-Charge. Make : CG/wipro/C&S

Supply and fixing in repair of LED 90W Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed by EIC.Make : CG/Bajaj/C&S

S&F in repair 32 mm bore, light grade, GI pipe bracket 1.2 mtr long, bend to shape including clamps made out of 50 x 6 mm flat iron and suitable size nuts, bolts and washers duly painted with two coats of aluminium paint over a coat of red oxide primer all as directed.

S&F in repair of double door type vertical type TPN DB 4 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand /Seimens/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Make: Legrand cat No 507611 /Seimens/C&S. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

Supply and fix Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed. Make : Legrand/C&S

S & F in repair MCB SPN 40Amps, 10 KA Rupturing capacity

S & F in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity

S & F in repair MCB TPN 63 Amps, 10 KA Rupturing capacity

M&L for submain wiring in repair with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including heavy grade PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

MADHU ENTERPRIZES (BID ID -3355886)

A.R. ENTERPRISE (BID ID -3356175)

Laxmi Sales (BID ID -3364453)

Bright Construction Co (BID ID -3355131)

GANGAJAL (BID ID -3350927)

VIVANSH RAWAT CONSTRUCTION (BID ID -3355960)

MAA VAISHNAV CONSTRUCTION (BID ID -3363791)