SPL REPAIR OF BLDG NO P-1 (MALL - 1) OF 501 AD MSL REGT (MRSAM) UNDER GE NASIRABAD

Taking down cement or cement lime plaster/Pointing on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone /Brick masonry surfaces finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on stone / brick masonary, external surfaces finished fair & even complete all as specified and directed.

M&L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

S&F of vertical TPN distribution board, IP-43 double door metal, 4 way, made out of CRCA sheet steel, factory made powder coated with insulated vertical phase bus bars, shrouded neutral bars, earth bars, colour coded interconecting wire set, blanking plates suitable for up to 125 amp MCCB's as incomer and MCB's SP/TP as outgoing complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB, MCCB and MCB's will be of same make.

S&F in repairs MCCB, 100 Amp, 4 Pole, 25 KA,

415 V, thermal magnetic release type, Ics=100% Ea Icu, with adjustable overload setting and adjustable short circuit setting, including spreader terminals and phase barriers complete all as specified and directed. Make : Legrand/Siemens/Scneider/Havells

Demolition of Stone slabs and tiles laid bedded and jointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L glazed ceramic coloured tiles, size 600 mm X 1200 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for Light shade Non skid ceramic tiles 7 to 8 mm thick, premium quality, coloured (of approved shade and design) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,joint free, as in floors and skirtng, etc. set and jointed in chemical bond of make somany/ Dr fixit/ Bal endura with pigment to match with shad ,laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed.

M & L for two coats of synthetic enamel paint over a priming coat of red oxide after preparation of new surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

d directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M&L pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength og 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion complete all as specified and directed.

M&L for Random Rubble stone walling uncourses, built in CM (1:6) complete all as specified and directed.

All as per item no 38.00 above but except stone complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm complete all as specified and directed.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling with PCC 1:3:6 complete all as specified and directed.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesi

S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair Deco door seal size 1.5" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed. Make :Jaguar,cera,Hindware

Demolition and bracking up drain pipe SWG line set in CM of description, 150mm dia including side packing / haunching complete all as specified and directed.`

S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted.

M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings for 150 mm bore pipe complete all as specified and directed.

M&L for 150mm dia in bore Reinforced concrete pipes, class NP 2 with one collar per length of pipe laid in trenches and jointed complete all as specified and directed.

S& F rotational moulded synthetic (HDPE) water storage tank 1000 litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe they are laid with PCC 1:4:8 type D-2 for pipe of 150mm dia in bore complete all as specified and directed.

Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but n.exc 1000 ltrs capacity each complete all as specified and directed.

S&F ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed.

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing partition at top & bottom with aluminium channel etc complete all as specified and directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified and directed.

M&L in repair precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 and jallies design as per site requirement complete all as specified and directed.

M&L for Post Construction Anti TermiteTreatment by injecting recommended chemicals after proper surface preparation,drillingofplinthfloor/wall, inside floor/wall,door/windows etc at the

recommended level alongthe junction of walls and floors at an interval of about 300 mm,caping and sealing the drill holes with white cement or grouts to create a chemical barrier along the internal perimeter and wood-based materials, structures of the building to eliminate existing termite infestation and to make it resistant from termite attack on the path of termites seeking entry to the building including all cost of materials, chemicals, medicines, labour T&P, PPEs etc. complete and thorough cleaning & housekeeping of the area after application complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

Disconnecting and taking down unserviceable sub main wiring of any size including steel/PVC conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets etc for re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed

M&L for point wiring with 1.5 Sqmm (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth complete all as specified and directed for the following :

One light point controlled by one, one way switch.

One Ceiling fan/wall fan/exhaust fan controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board.

All as per item No 115.00 above but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 1.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed.

S&F of modular switch 1 way 6/10Amp, 1 module, complete all as specified and directed.

S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed.

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth by Auto Roller complete all as specified and directed.

S&F of mdoular socket 6Amp/16 Amp. 2/3 pin combined 2 module complete all as specified and

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module complete all as specified and directed

S&F in repair health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed. Make : Jaguar,cera,Hindware

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed.

S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed.

S&F of ventillation fan 300 mm sweep non metallic white colour including connecting with three core Ea flexible copper wire from ceiling rose to connector of fan complete all as specified and directed

Supply and fixing LED box type tube light fitting 20 watt, cool day/warm/ white light with made up of Ea CRCA sheet with pre wired double sided connections including 1x20 watt retrofit LED tube rod with extruded aluminium body, PC diffuser and inbuilt driver, double sided connection, complete with all accessories internally prewired. Make : Crompton Cat Part No IS 340 NWH, Suitable for 1 x 20 Watt T8 LED & LED Tube rod 20 watt, TCS-726 or equivalent in Havells/Bajaj

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with motor, blade set of three nos, down rod, canopy, shackle assy complete all as specified and directed.

Supply and fixing wall mounted decorative luminarie fitting suitable up to 9/10 Watt LED lamp/filament lamp champagne gold finish fixture with plastic body suitable for B22 Base complete all as specified and directed. Make : Havells Model LHFOECE1TZ1B014, LHFHANDBTN1K007, LHFOAJE2TZ11060 and LHFHANDBTN1M007 or equivalent model of Crompton/Philips

Supply and fixing LED light fitting mirror type, in decorative, cool day/warm/ white light with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size 20 S&F LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including cool day/warm/ white light connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

S&F LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including cool day/warm/ white light connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics alongwith bracket made of 32 mm Gl pipe, 1.2 mtr length complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm/ white light with white powder coated CRCA housing with LED driver, efficiencey >100 Lm/w complete all as specified and directed. Make : Crompton/Havells/Philips

M & L for submain wiring with two single core PVC insualated unseathed, FRLS, 1100 volts grade 6 sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid concealed conduits and the conduits accessories inci one run of green colour earth continuity conductor with 6 sqmm multi stranded copper conductor cable complete all as specified and directed.

M & L for submain wiring with two single core PVC insualated unseathed, FRLS, 1100 volts grade 4 sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid concealed conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 sqmm multi stranded copper conductor cable complete all as specified and directed.

M&L for TV Socket incl PVC conduit and co axial cable wire complete all as specified and directed.

M&L for Telephone socket incl PVC conduit and telephone wire complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP 'C' series for AC complete all as specified and directed.

Taking down and Supply and fixing of Change over Three Pole Neutral AC 400 Amp, with bolted type fuse in sheet enclosure with fuses complete all as specified and directed.

S&F cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed. Make : Jaguar,cera,Hindware

S&F wall fan of size 300 mm sweep, Speed upto 2100 RPM, Air Delivery 90 CMM, 230/240 volts including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. Make : Havells, Bajaj, Usha

Supply and fixing in repair surface mounted LED downlight 15/18 watt round shaped, Slim surface mounted LED panel with cool day/warm/ white light premium diffuser to ensure glare free & even light distribution complete all as specified and directed. Make : Havells, Model -Trim Cosmo Surface Round, Cat Part No LHEAAHP7IL1W018, or

S&F looking mirror 900x600x6mm with frame, with chromium plated brass screws and cup washers fixed to wall complete all as specified and as directed. Make : Jaguar,cera,Hindware

S&F in repair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed. Make : Jaguar,cera,Hindware

equivalent model of Philips/Compton

S&F storage type water heater (Geyser) electrical operated 230 volts including connecting Ea inlet/outlet/vent pipes, electric/earth connections, mounting bolts, nuts and carrying out testing for proper functioning of geyser of capacity 25 ltrs complete all as specified and directed.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43. E DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way. 240 volts suitable for housing MCB's and isolator's complete in all fixing material/ accessories etc complete all as specified and directed. Note: MCB DB and MCB will be of same make.

S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43, made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed

S & F of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F of MCB SP, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F of MCB TPN, 415 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-1 of 2009 incl dismantling of old unsv existing earthing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed.

Supply and fixing tubes light grade Gl tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.