RequiredExperience with Government
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Laundry Type Washing Machines/Drying Machines ( 7 pieces ) Technical Specifications * As per GeM Category Specification 1/5 Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type of Machine Washer with Dryer Extractor Washer with Dryer Extractor Type of Usage of Machine Domestic Domestic Number of Duty Cycles per day - Nominal 2 * Type of Mounting "Soft Mount (No Grouting Required)" "Soft Mount (No Grouting Required)" Drive Type Variable Frequency Direct Drive Variable Frequency Direct Drive Number of Tubs/Cont ainers/Drums Stacked Washer/Dryer Containers Stacked Washer/Dryer Containers Container/Drum Position Vertical Vertical Type of Laundry Loading Top Load Top Load Laundry Processing Semi Automatic Semi Automatic Type of Heating Electrical Heating Electrical Heating Steam Source NA NA Provided with coin currency operated Timer No No Material of Top Panel Plastic Plastic Material of side Panel Plastic Plastic WASHER Washer System Drum Type Drum Type Rated capacity of Washer (in kg) 8 - 8.9 8 - 8.9 "Washer Drum Volume 500 * "Washer Drum Dia 10 * "Washer Drum Height Length 450 * Material of the Washer Drum Stainless Steel Plastic
RequiredStainless Steel "Number of Preset Wash Programmes 10 * "Normal Washing and Rinsing Cycle time 15 * Provided with Automatic Detergent dispensor with liquid soap pump/dosing YES YES 2/5 meter DRYER Type of Dryer Hydro Extractor (Spin Dryer) Hydro Extractor (Spin Dryer) Type of Tumble Dryer NA NA Rated capacity of Dryer (in kg) 8 - 8.9 8 - 8.9 Dryer Drum Volume 500 * "Dryer Drum Diameter " 450 * "Dryer Drum Height Length" 450 * "Dryer Spin Speed in rpm" 400 * Material of the Dryer Drum Stainless Steel Plastic
RequiredStainless Steel Spin Speed Selection Yes Yes Provided with Hot Air Blower No No "Exhaust Blower/Fan motor Power Rating" 100 * Air Flow Rate (in cubic meter/hour 100 * "Number of Preset Dryer Programmes" 20 * "Normal Drying Cycle time" 15 * Steam Consumption (in kg/hour) 10 * GENERIC "Electric Heating Power Rating" 15 * Minimum Water inlet Pressure 5 * Maximum allowed Hardness (CaCO3) of inlet water (ppm) 100 * "Steam Pressure" 5 * Temperature Control Selection No * Noise level 50 * connectivity NA * Electrical Safety Provisions as per IS : 302 latest Yes * 3/5 Net Weight 30 * Overall Dimensions (mm x mm x mm) - * Features/Functions Functions Rinse and Spin * Other features
Requiredif any - * List of Items and Quantity of each item included in the offer - * POWER SUPPLY Power Supply Single Phase
Required50 Hz Single Phase
Required50 Hz Working Voltage 230 ± 10% V AC 230 ± 10% V AC Number of Motors 2 * Power Rating of each motor (kW) - * BEE Star Rating NA NA
Required1
Required2
Required3
Required4
Required5 Or higher INSTALLATION & COMMISSIONING/STC Installatiion and Commissioning as per STC Inclusive in the scope of Supply * Agreed to the STC of the Product YES * GUARANTEE WARRANTY Minimum Rated Life Cycles 5000 5000 Warranty on Equipment 1 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
Required9
Required10 Or higher Warranty on Electric Motor (s) 1 1
Required2
Required3
Required4
Required5 Or higher CERTIFICATION Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove the Minimum Guaranteed Life Cycles
Requiredetc No No If Yes
RequiredTest Report to be furnished to the Buyer on demand NA * Test Report No and Date - * Name of the Lab and Address - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
