6 Class Room and Electricity and water related Construction work in Girls Middle School ,South Barkatha , Block- Barkatha, Hazaribag

Amount

Earth work in excavation in foundation trenches in ordinary soil(vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering-All work up to plinthlevel 1:3:6(1 cement:3 coarse sand(zone III):6 Gradestone aggregate 20 mm nominal size)

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering-All work up to plinthlevel 1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls(any thickness) , including attached pillar, buttresses ,plinth and string courses, fillets.columns.pillers.piers,abutments, posts and struts etc above floor five level, excluding the cost of centering , shuttering, finishing,and reinforcement with- :1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specication and direction of E/I.

Providing 25mm thick damp proof course with cement concrete M-150 with nominal mix of (1:12:4) with approved quality of stone chips of 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position, striking, curing, taxes and royalty all complete asa per building specification and direction of E/I

Providing designation 75 B brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete work in beams ,suspended floors,roofs having slope up to 15 degree landing,balconies,shelves,chajjas,lintels,bands,plain wndows ills,staircase and spiralstair case up to floor five level, excluding the cost of centering , shuttering, finishing,and reinforcement with- :1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundation ,footings,bases of column .etc for mass concrete Centering and shuttering including strutting proping etc .and removal of form for

Centering and shuttering including strutting, propping etc. and removal of form for Centering and shuttering including strutting proping etc .and removal of form for Lintels,beams,plinth beams ,girders,bressumers and cantilever

Centering and shuttering including strutting, propping etc. and removal of form for Centering and shuttering including strutting proping etc .and removal of form for Columns,pillars,piers,Abutments,post,and Struts

Centering and shuttering including strutting proping etc .and removal of form for suspended floors,roofs,landings,balconies and access platform

Centering and shuttering including strutting proping etc .and removal of form forstairs (excluding landings) except spiral staircase

Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window) gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all complete as per specification and direction E/I.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specification and direction of E/I.

Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.

Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing 25 mm thick water proof cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab beam at the time of casting all complete as per building specification and direction of E/I.

Provinding primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurment Area shall be multiplied by the co-efficient as indicated in building specificaton.)

Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I.

Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with flor, curing, taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing and applying white cement based putty of thickness 1.0 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth with complete job

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade : ( New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth.

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Supplying, fitting & fixing C.A.R.W.D. pipe with necessary strips, spikes, bends, shoes etc. including cost of carriage all complete as per building specification and direction of E/I.

Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 10 mm (TMT Fe 500)

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (b) 12 mm-20 mm (TMT Fe 500)

Carrage of Materials (a) Sand Avg. Lead 10 km

Carrage of Materials (b) Brick Avg. Lead 10 km

Carrage of Materials (c) chipes Avg. Lead 15 km

Carrage of Materials (d) Metal Avg. Lead 15 km

Wiring for light point / exhaust fan point / call bell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As

Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections as required. 5/6 amps , 3 pin socket outlet

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper cinductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required.

Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x2.5 sq mm+1x2.5 sq mm earth wire

Supplying and fixing batten /angle holder including connection etc as required.

Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required.

Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job 6 Way Single door

Supplying & fixing 6amps to 32 amps rating 240 volts "B" series miniature circuit breaker suitable for lighting and other loads of folloing poles in the existing MCBDBcomplete with connectiontesting and commissioning etc. 6/32 amps, single pole,"B" series

Providing and fixing following capacity double pole / TP/N sheet matal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in matel board making connection etc. 32 amps , double pole

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. (But without charcoal or coke and salt )

Extra for using salt and charcoal for G.I. or Copper plate earth electrode as required.

supplying and fixing 8SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G. I. tube, having single prong at top, with 85 mm dia 3 mm thick G. I. base plate including holes etc. as required.

Reverting, swearing and soldering of copper/ G. I. tape ( with another copper / G. I. tape, base of the finial ar any other metallic object) as required.

Providing and fixing G. I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing testing joint, made of 20 mm x 3 mm thick G. I. strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, check nuts and spring washers etc. complete as required.

Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as required.

S.T.C.OF Floowing rating LED street lighting luminarie with pressure die cast housing and toughened glass cover(IP 66 protection ) in existing pole/pipe for supply voltge 100-270 V AC,50Hz.Luminarie Shall be confirm ti IS:10322 part 5/section -3and shall be complete with all neccssary accessories as required 90/100 W LED Street light

Supply Installtion, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS: 374: 2019 Including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm.FR PVC Insulated copper wire suitable for 230 v 50Hz ,single phase supply etc complete as required 1200 mm (48") Ceiling fan

S.T.C.OF Floowing rating reccess /surface mounted LED tube light fitting suitable for 230v 50Hz,single phase supply etc.complete as required 15/16 Watt LED Bulb

Add GST 18 %

Add L.Cess 1 %

nomnes construction pvt. limited (BID ID -660447)

Amrendra Kumar (BID ID -660305)

INDRADEV PURUSHOTTAM CONSTRUCTION PRIVATE LIMITED (BID ID -660460)