PROVN OF TOILET STORE ROOM INCL ADDN ALTN TO EXISTING BLDG AT BSO YARD COMPLEX AND PROVN OF TOILET BLOCK BLDG AT DSSC WELLINGTON

Amount

ROVN OF TOILET, STORE ROOM INCLUDING ADDN/ALTN TO EXISTING BLDG AT BSO YARD AGE B/R I

Dimantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all a specified and as directed.

Dismantling floor, hearth or wall tiling & stone slab laid, bedded and pointed cums mortar in etc incl cement mortar bedding but not backing removing rubbish off the premises.

Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 15cm thick (below or above ground level) un-reinforced all a specified and as directed.

Taking down Door/Window shutter not exc. 1.0 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc. 1 Sqm and not exc. 2.00 sqm each

Demolition of cement concrete (un reinforced) in ground foors and pavings exceeding. 15 cm thick all as spd

Demolition of brick work, built in cement mortar including all Quloins arches, pillars etc. complete as specified and as directed.

DemolitionRR Masonry wall of any description and in any position not otherwise specifically provided etc complete all as specified and as directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/ dense soil

Rough excavation not exceeding 1.50 metre deep and getting out in hard dense soil all as directed.

Excavating over areas, n .exc 1.50 m depth and getting out in hard dense soil

Excavating over areas, exc 1.50 m and n.exc 3.00 depth and getting out in hard dense soil

Excavating over areas exc 3 m and n.exc 4.5m depth and getting out in hard dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting out in hard/dence soil complete all as speaified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and as directed

Removal of excavated material (Soil) exc 1.5 KM and n.exc 5.0 KM and deposited where directed all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L plain cement concrete 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed.

M& L for Pre-cast cement concrete Type C1 1:3:6 (20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate)as in surface channels and drains incl all moulds and forms all as spd and as directed.

M&L for reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm aggregate) for lintels and chajjas upto 1.5m clear span complete all as specified and as directed.

M & L Plain cement concerte 1:2:4 type B1 using 20 mm graded stone aggregate as in benching to manholes etc including use of form work all as specified and as directed.

M&LPrecast cement concrete block Type C1(1:3:6)(using 20 mm graded stone aggregate) masonry with solid solid blocks 10cm width and setting in mortar(1:6) complete all as specified and as directed.

M&L Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves,cooking platform and similar articles with plain faces complete as specified and as directed.

Formwork to sides and bottom of roof beams, lintel beams etc rough finished surface of concrete complete all as specified and as directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surface of concrete completed all as sspecified and as directed.

M&L Rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces finishing all as specified and as directed

M&L Rendering 15mm thick CM 1:4 on fair faces of brick work or concrete surfaces incl finished even and smooth (without using extra cement) all as specified and as directed

Supply and fix Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columy hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia or securing with clips all as specified and as directed

Supply and fix Mild steel bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columy hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia or securing with clips all as specified and as directed

Ditto as item No 16 but 6 to 8 mm dia dia and over upto and including 10mm diain stirrups, spacers and binders

M&L PCC 1:4:8 type D-2 using 40mm graded Aggregate in sub base 100mm thick.

M&L PCC 1:2:4 type B-1 using 20mm graded Aggregate in floor 25mm thick.

M/L for non skid coloured ceramic tiles ( of any colour) flooring 7 to 8 mm thick area of each tile exceeding 0.06 sqm and not exc 0.11 sqm with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick cement screed bed in CM 1:4complete.(Make: Somany/Naveen)

M&L glazed ceramic tiles in vertical surface of size 300x600x7mm thick set and jointed in neat cement slurry pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:3 complete

M&L for matt finished joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and as directed.

Ditto all as per item No. 10 above but in skirting etc and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles.

Granite (of any type) work (table rubbed and polished) in steps in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20mm thick screed bed etc complete as in flooring all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 75 mm thick all as specified and as directed.

M&L Chequered cement concrete coloured tiles having hard rubber finish top with polymer admixtures in any pattern or design of min size 30cm x 30 cm x 25 mm thick, set jointed and poited in neat cement slurry in floors over 20 mm thick screed bed in CM mortar 1: 4 all as specified and as directed

UPVC door The profile for costruction of UPVC Door will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The door will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 nos on each sicde. The glazing will be fixed to door frame with UPVC standerd beadings of 24.5 x 16 mm of 2 mm thick.The bottom portion of door for 1 m height will be provided with UPVC hollow board not less than 6 mm thick. The door shutter will be fixed to frame using 3 nos of 3 D hinges. The door will be provided with one mortice lock with powder coated handle and two powder coated MS tower bolts. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge.

S&F steel windows with side hung shutters incl projecting type hinges with steel handles, steel peg staycomplete with glazing dove tail or welded all as specified and as directed.

UPVC ventilators M& L for UPVC ventilator with The profile for costruction of UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge.

M&L 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and as directed.

M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane all as specified and as directed.

Supply and fix counter top wash basin white oval type 410x410x155mm fixed over granite slab of size 750x450x18mm including brackets, waste pipe, waste coupling etc. Including taking down existing one all as specified. Make Jaquar No CNS-WHT-705 popular for counter type or equivalent in Jaquar/Parryware/Hindware Note : Granite rate in included in items.

S&F wash basins, vitreous china of size 450 x 300 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed.

S&F vitrous china wash hand basin white 550x400mm flat back inclduing fastners and providing CI brackets, wste pipe 40mm dia medium grade, CP brass wast coupling 32mm dia with check nut washer, PVC connection etc fixed in repairs all as diected by EIC.

S&F pillars taps CP 15mm dia of long body cast copper alloys of fancy type screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed in repairs all as directed by EIC.

S&F stop valve chromium plated fancy type cast copper alloy of long shank consealed type, screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete 15mm dia.

S & F Viterous china wash down water closet pan(pedestal pattern) white including fixing bolts, flushing cistern, PVC bend, seat cover and connecting to PVC (SWR) pipe complete all as specified : Make : Jaquar CNS-WHT-551PN or equivalent in Paryware/Hindware

S&F viterous china wash down water closet (EWC) pedestal pattern with seat cover including stainless steel hinge device incl trap and connection to waste pipe and flushing cistern complete all as spd and as directed.

S&F viterous china wash down water closet (EWC) pedestal pattern incl trap and connection to waste pipe and flushing cistern incl seat cover and PVC flush pipe 32mm complete in repairs.

S&F for 10 litres capacity PVC flushing cistern high level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level all as specified

S&Ffor Vitreous china bowl urinal of flat back half stall type white excluding flushing cistern white with grating and union for discharge pipe and PVC waste pipe flexible type etc complete in repair.

Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F cast copper alloys chromium plated fancy type urinal spreader with push cock suitable for 15mm dia pipe for urinals all as spd and as directed.

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of size 15mm dia

S&F GI tubing tubes 15mm dia bore"medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

Description all as per item No 60 but 20mm dia bore

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm all as specified and as directed.

S&F high density polythene pipe 40mm dia blue in colour HDPE at pressure rating 6kg/cm2 fixed complete to wall or floor incl bend tee elbow etc for waste pipe at wash basin /flush tank.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and as directed.

S&F in repairs Bib cock (Two in one) complete all as specified and as directed.

S&F bib taps of cast copper alloys chromium plated fancy type, screwed down screwed for iron pipe or for brass fenule and fixrd for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed in repairs.

Supply and fix health faucet (hand shower) chromium plated with 1.0metre long easy flex tube 8mm dia with wall hook screwed for two way bib taps etc., complete all as specified and as directed.

S&F CP toilet paper holder fixed to wall with cp brass screws .Make Jaquar Cat No- AKB 35751 or equivalent models in Cera

S & F CP towel ring squre . Make - Jaqaur. Cat No. AKB-35721 or equivalent in Cera

S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed.Make:Jaquar CQT-23083K

S&F two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed..

S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed. Make : Prayag Cat No FT-93 or equivalent in Jaquar/Parko/Marc as approved by GE.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S & F PVC (SWR) bends any radious 75mm bore provided with acess door.

M/L 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for PVC (SWR) bends 110mm mm any radius complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl of size 110mm bore dia complete all as specified and as directed.

M/L 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall as spd and as directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S & F rolled mild steel section conforming to grade E-165 (Fe-290) framed work as in door or gates of angle or other section with gusset plates rails , braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening, etc complete all as directed by Engr-in-Charge.

M&L applying two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide of any description not other wise described over 10 cm width or girth incl preparation of surfaces all as specified and as directed.

M&L two coats of cement based paint over a coat of white wash on new plaster surfaces on walls including preparation of newly plastered surfaces complete all as specified and as directed.

M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall &applying with white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint complete all as per manufacturer instruction as directed.

M/L for PCC 1:2:4 type B1 using 20mm graded stone aggreages as in hard standing/approaches of 75mm thick complete all as specified and as directed.

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and as directed

S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm

S&F extruded brass handle fabricated type 150mm size and complete all as specified and directed

Supply and fix Magnetic closer of suitable size for cupboards fixed with screws complete all as specified and as directed.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

S&F of stainless steel cupboard cabinet lock with 2 keys

M&L walling of random rubble un coursed well bonded bedded and solidly hearted built in cm 1:6 and pointed the dressed surface with same mortar as the work process.

Material Labour for 110 mm dia PVC (SWR) pipes single socketted, in any length with rubber ring joints, laid in trenches or in floors

Hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exe 40mm.

M&L cement concrete 1:3:6 using 20mm graded aggregate, as in coping including necessary form work

Material Labour for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4)

M&L for broken stone / boulders loose filling with aggregates of gauge 40 to 80 mm in back of walls

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall

Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make:Sintex/Polycon/Vectus Industries Limited

S&F of 9/10mm thick PVC ceiling/wall panels of interlocking types,width250/255mm with lamination design and exc 60% of PVC content incl necessary H-joints, internal and ext cornertrim,corner cove,F/J edge trim where required fixed with hidden screws to steel/wooden frame work complete all as specified

M&L for providing gypsm board false ceiling using 12mm thick gypsm boar panels of size as approved by GE,fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing gypsm board using T and angle sections made out of 0.5mm thick PGI sheet grade of Zinc coating 220, bent to shape as required as in main member, secondary member, perimeter angle section incl provn of GI channel suspender fixed to roof member at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasterners clips as per manufactures instructions with and incl POP decorative type cornice all around at the junction of wall and ceiling complete all as specified and as directed

M&L for preparing of gypsm board false ceiling with primer and applying 3mm thick wall care putty and appling two coat of OBD over one coat of primer complete all as manufacturer instructions and as directed

M&L brick work sub class B bricks straight or curved on plan exc 6m mean radioujs built in CM 1:6 complete all as specified and as directed.

S&F 20mm dia mild steel bar as in rung of septic tank all as specified and as directed..

M&L for Reinforced cement concrete (nominal mix) type B- 1(1:2:4) using 20mm graded stone aggregate as in slabs supported on wall etc all as specified and dircted.

M&L providing precast cement concrete as in manhole cover, set and jointed in cm 1:4 type B1 1:2:4 (using 20mm graded aggregate including necessary form work all as specified and dircted.

Form work to saffit of suspended stab such as roof slubs, floor stabs, landing and similar work not exceeding 200mm thick horizental or slooping for rough finishedsurfaces all as specified and dircted.

M&L for Reinforced concrete pipes, Bore 150mm class NP2, laid and jointed complete with collars all as specified and dircted.

.M & L 150 mm dia PVC SWR drain pipes laid in trenches and jointed complete with collars all as specified and dircted.

Material & labour for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they laid and tested in cement concrete 1:3:6, type C2, 150mm bore pipe all as specified and as directed

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 1.5 M effective depth

Removal of excavated material n.exc 50 metre and deposited where directed at a level n.exc 1.5M above from starting point.

PROVN OF TOILET BLOCK BLDG AT DSSC WELLINGTON AGE B/R II

Cutting out bricks,forming toothing for,and bonding new into old work built in CM (1:4) including value of new materials entering old walls and jointing and pointing all as directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m all spd and as directed.

M&L for precast solid block exceeding 10 cms in width 1:3:6 type C1 (using 20mm graded aggregate) and set in cement mortar 1:6 all as specified and as directed

Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type B-1 using 20mm graded stone aggregate and setting in mortar,(1:4) complete, in walls all as directed by the Engr In Charge.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete and removing rubbish outside MD land as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for Reinforced cement concrete (nominal mix) type B- 1(1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers,lintels over 1.5m span etc all as specified and dircted.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.all as spd and as directed.

S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Description all as item No 117 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick(square/rectangular) area of each tile exceeding 0.11Sqm, but not exceeding 0.18 Sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.Make : Rak Ceramics/Somany/Khazaria

M&L for glazed coloured 300x600 x 7 mm th as in skirting/dado over & including 15mm th rendering in CM 1:4 set on stone masonry or other trhan brick masonry & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as specified and as directed. Make : Rak Ceramics/Somany/Khazaria

M&L 20mm thick rendering plaster on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathingsmooth without using extra cement in CM 1:6 complete all as specified and as directed .

M&L 20mm thick rendering plaster onon stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing (External wall) smooth without extra cement in CM 1:4 complete all as specified and as directed .

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.Make : Rajshri palstiwood/Duroplast/Sintex Industries

Supply and fix Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.Make : Rajshri palstiwood/Duroplast/Sintex Industries

S & F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete.

S & F Flush shutters,35mm thick solid core construction, with particle board core and one face is covered with decorative face vaneer complete all as specified and as directed.Make : Century/Greenlam/Jain Doors

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed incl taking down old damaged steel ventelator.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled.

S&F Mild steel butt hinges 75mm long, medium weight, cold rolled.

S&F Extruded aluminium alloy handles 125mm long, Aluminium handles, cast type,anodised.

S&F Aluminium anodised barrel tower bolts,125 mm long, of extruded section.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragate steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed

M&L for M S Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as spd and as directed.

M&L for MS work for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to AFe-290 (Gde E-165)

S&F figured glass pin head type and glazing 3mm thick with oil putty in squares with oil putty in squares n.exc 0.5 sqm in each pane.

Supply only Liquid water proofing compound

S&F in repair Water closet vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connecting to trap and flushing pipe anti syphon pipe etc provision of lime concrete bedding complete all as specified & directed.Make : Parryware/Hindware/CERA

Supply and fix in repair, 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. Make: Hindware/ Prayag/Neycer

Supply and fix galvanised steel water tubing 15 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.Make : Jindal/Prakash/Tata

Supply and fix galvanised steel water tubing 20 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.Make : Jindal/Prakash/Tata

Supply & Fix Bib cock 15mm bore cromium plated (Fancy) long nose with wall flange and aerator complete .screwed down for 15mm bore GI Pipe or for brass ferrule complete .Make : Parryware cat No : G1405A1/Hindware cat No F730011/Jaquar Cat No : CON107KN

S& F Pillar cock cromium plated with wall flange complete .screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed.Make : ESSCO Cat No : APR-101001M/ JAQUAR cat No : ALI-85001/Hindware cat No : F520001

Supply & fix in 15 mm bore dia angular Stop cocks, cast copper, fancy type, chromium plated, with wall flange screwed down, screwed fro iron pipe or union and complete all as directed. Make : JAQUAR Cat No CON-053KN/Parryware Cat NO : T9828A1/Hindware Cat No :F850030

S&F20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to iron pipe or union and complete all as directed.

Supply & fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall/floor etc with necessary clamps,bolts etc.complete all as specified and as directed .Make : Prince/Supreme/Finolex

Supply & fix 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by the Engr-in-Charge.Make : Prince/Supreme/Finolex

Supply & fix 110 mm bore PVC (SWR) junction (Single T) equal or un-equal radius complete all as specified and as directed by the Engr-in-Charge.Make : Prince/Supreme/Finolex

Supply & fix 110 mm bore PVC (SWR)vent cowl 110 mm complete all as specified and as directed by the Engr-in-Charge.Make : Prince/Supreme/Finolex

Supply & fix in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps,bolts etc.complete all as specified and as directed .Make : Prince/Supreme/Finolex

Supply & fix in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed by the Engr-in-Charge.Make : Prince/Supreme/Finolex

Supply & fix in repair 75mm bore PVC (SWR) junction (Single T) equal or un-equal radius complete all as specified and as directed by the Engr-in-Charge.Make : Prince/Supreme/Finolex

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete for 100mm dia all as directed.

Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make:Sintex/Polycon/Vectus Industries Limited

M&L for 6mm thick Plywood, grade BWR,type BB, fixed with screws to timber frame work all as spd and as directed by the Engr In charge. Make : Century/Kitply/Greenlam

M&L for Second class hard-wood in scantlings with wrought finish as ceiling etc all as spd and as directed by the Engr In Charge.

M&L for 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads sec area exc 6 and not exc 13 Sqcm all as spd and as directed

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as spd .

S&F 75mm PVC (SWR) multi floor trap plain with grating including jointing with solvent cement complete all as spd .

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm.

M&L for applying three coats of white wash on new/old plastered wall surface including preparation of new and old surfaces of wall complete all as specified and as directed .

M&L for perperation of new /old plastered surfaces of walls including preperation and appying two coats of weather coating on external emulsion (Apex) over a coat of primer on walls complete all as spd and as directed.. Make:Asian paint (Apex Ultima)/Berger Paint (Wheather coat all Guard)/Dulux(Wheather Shield Max)

M& L for 100mm thick PCC type C-2(1:3:6) using 40mm graded stone aggregate as in pavings,hard standing etc including finishthe surface even and rough to receive the top finish complete all as diercted by the Engr In charge.

M&L for chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in soft /loose soil all as specified and as directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality B complete all as directed by the Engr In Charge.

Material and labour for two coat SE paint on steel surface over one coat of red oxide primer incl prepareation of new or old steel surface complte all as spd and as directed.

S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as spd and as directed .Make : JSW/Tata/Metco

Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in any type of soil for foundation etc complete all as directed by the Engr-in-Charge.

M&L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations,filling and mass concrete

M&L for Concrete bed in PCC 1:3:6 type C-2 using 20mm graded stone aggragate to drain pipes including packing under and completely Surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe all as spd and as directed.

S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and direcetd.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil all as spd and as directed.

Removing excavated material exc. 2.50KM and not exceeding 5 KM and depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engr In Charge.

Precast RCC 1:2:4 typeB1 using 20mm graded stone aggregate for cover slab of set in CM 1:4)reinforcement measured separately)

TMT 10 mm dia and over cut to length bent to shape required and cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia

S& F CP Towel rail 600mm (24") incl necessary drilling,bolting etc all as directed by the Engr In charge.Make :CERA Cat part No : F5003103/Hindware Cat No :F880005RGD/ESSCO Cat part No : AEC-1111N/Jaquar cat part No :CAN-1111SM

S&F corner glass shelf made out of glass with cap guard rail and wall fixing accessories of 300mm radius matt finished,chromium plated (MCH/colour CP) with brass brackets fixed on walls all as specified and as directed. Make : Jaquar,Cat No. CAN-1173/parryware Cat No. T6010A1/Prayag Cat No. BEA-52.

Supply and fix as in reapir vitreous china, white, flat back wash hand basin of size 515mm x 410 mmx 195mm including m and including CP brackets (of suitable size) including 32 mm bore brass chromium plated waste coupling, 32 mm dia PVC waste pipe etc. complete including taking down old wash hand basin alongwith fittings all as specified.Make CERA :Cat part No : CADAL S2040121 or Equivalent.

E/M PORTION OF WORK AGE E/M

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-Charge.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed by Engr-in-Charge.

NOTE for Item Nos 193.0 to 195 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.Make of cable : Havells/Polycab/Finolex.

Description all as per Item No.196 above, but One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.196 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

M&L for surface point wiring with 1.5 Sq mm,FRLS, PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including PVC Casing caping medium grade for one light/exhaust fan/call bell point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly complete all as directed. Make:Havells/Finolex/Polycab.

Description all as per Item No.199 above, but One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.199 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

NOTE for Item Nos 196 to 201 : (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces & matching to the original/existing surface is deemed to be included in the quoted rate.(iii) Modular metal flush boxes shall be measured & paid separately. (iv) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for Surface sub-main wiring alongwith earth wire of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. NOTE for item No 202AND 203 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit/Casing-capping (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.3) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular switch with indicator, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACTXMIIX04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACVPPCWV04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

NOTE for Item Nos 204 to 213 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F in repairs call Bell, AC, Buzzer Ding Dong type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/Legrand/Anchor

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No LT510Por techno-commercially equiv In Havells/Philips

S&F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No LT5M24 or techno-commercially equiv In Havells/PhilipsS or techno-commercially equiv In Havells/Philips

S&F ultra modern, recess mounting, 40W, 6500K LED Elegant slim panel of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED of Make: Luker cat No: LPS40 or techno-commercially equiv in Jaguar/Philips all as directed by the Engr- in- charge .

Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL30WLED757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips.

S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton.

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note for item No 34 & 35 :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/ABB.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/ABB.

S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN004DD or techno-commercially equiv in Legrand/ABB.

S&F MCB TPN, 63A rating, 415Volts, 10 KA `C' Series all as specified and as directed by the Engr-in-Charge. Make: L&T Cat No: BB40630C or equiv in Havells/Legrand.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for fixing one single pole MCB 32A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB

Supply, Installing and Testing Vertical type Storage electric water heater (Geysers) of 50 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation,2KW, 230 V, Single Phase, 50 Hz, AC, BEE 4 Star rated including multifuntion safety valve and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and as directed by the Engr-in-Charge. Make: Havells Cat No: GHWAMGSWH050 or techno-commercially equivalent in Racold/ Bajaj Note : (i)Installed Geyser's warrenty card duly signed by the user should be submitted to the Engr-in-Charge (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate. (iii) The cost of transportation of old unsv geyser to MES storeyard is deemed to be included in unit quoted rates.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 16 Sqmm incl connecting with suitable glands, lugs etc all as specified and as directed by the Engr-in-Charge. Make: Havells/Gloster/Polycab.Note: Removing of old Un-serviceable LT UG Cable is deemed to be included in the unit quoted rates.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 2 Core 10 Sqmm incl connecting with suitable glands, lugs etc all as specified and as directed by the Engr-in-Charge. Make: Havells/Gloster/Polycab.Note: Removing of old Un-serviceable LT UG Cable is deemed to be included in the unit quoted rates.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and as directed.

Supply and lay light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces). Make:Tata/Jindal/Prakash

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and as directed.

Supply, spreading and compacting of Riddled earth in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32X6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. . Make of GI Pipe : TATA/Jindal/Prakash

Sree Constructions

ACE PROMOTERS

VVM CONSTRUCTIONS