REPAIR/MAINT OF BLDGS, HARDSTANDING, BDY WALL, ROOF TREATMENT IN DGRR OFFRS MESS, GUEST ROOMS, OR LINES AT PRATAP CHOWK AND DGRR OFFICE BLDGS AT RPSO COMPLEX IN THE AOR OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position, complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position, complete all as specified.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement including a mix of water proofing compound @ 100ml/50Kg Cement Bag complete all as specified and as directed. (Make Of Water proofing Compoung: Smartcare vitalia of Asian Paint or equivalent of Berger and Nerolac) (Note : Cost of water proofing compound shall deemed to include in the quoted rate).

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including a mix of water proofing compound @ 100ml/50Kg Cement Bag complete all as specified and as directed. (Make Of Water proofing Compoung: Smartcare vitalia of Asian Paint or equivalent of Berger and Nerolac) (Note : Cost of water proofing compound shall deemed to include in the quoted rate).

M & L for application of acrylic polymer-modified cementitious high performance coating on brick surfaces in two layers @ 1.5kg/Sqm complete all as specified and as directed. Make: Smartcare Damp Block 2K of Asian Paints or equivalent of Berger and Nerolac (Note: The rate includes for preparation of surface, Mixing of material, Apllication and curing as per manufacturer instruction)

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher and E-way Bill shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Online Payment proof to authorised applicator shall be submitted by contractor. (5) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M & L for preparation of New surfaces of wall/ceiling and apply 2 coats of Exterior Acrylic Emulsion Paint (coverage area 6.5-7.5 Sqm/Ltr for two coats), over a coat of 1.5-2mm wall care putty over a coat of alkali resistent primer (coverage area 14-17 Sqm/Ltr for one coat) complete all as specified and as directed. Make: Asian- Primer (TruCare Exterior Wall Primer Sealer), Wall care putty-TruCare Wall Putty), Exterior Emulsion Paint- Apex Or Equivalent in Berger or Nerolac

M & L for preparation of Old decorated surface duly brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss, efflorescent, salts and trading oil & greasy spotsand apply 2 coats of Exterior Acrylic Emulsion Paint (coverage area 6.5-7.5 Sqm/Ltr for two coats), over a coat of 1.5-2mm wall care putty over a coat of alkali resistent primer (coverage area 14-17 Sqm/Ltr for one coat) complete all as specified and as directed. Make: Asian- Primer (TruCare Exterior Wall Primer Sealer), Wall care putty-TruCare Wall Putty), Exterior Emulsion Paint- Apex Or Equivalent in Berger or Nerolac

M & L for preparation of New plastered or un-plastered surfaces of wall and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over 2-3mm wall care putty and coat of primer complete all as specified and as directed.

M & L for preparation of Old plastered or un-plastered surfaces of wall duly brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss, efflorescent, salts and trading oil & greasy spots and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over 2-3mm wall care putty and coat of primer complete all as specified and as directed.

S & F rotational moulded polythene, water storage tank 1000Ltrs capacity in double layer , closed top, cylindrical vertical ) hoisted and fixed in position including 20 mm flot ball brass valves high pressure with polythene float and flynut complete, Aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 20mm - 210 gms including dismantling old water tanks and removing to store etc complete all as specified and directed

S & F steel water tubing galvanised 15mm bore medium grade including all fittings fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 15 mm bore and connecetions, including fittings etc complete all as specified and directed.

S & F steel water tubing galvanised 20 mm bore medium grade including all fittings fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions, including fittings etc complete all as specified and directed.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for coloured vetrified tiles of size 600 x 600 x10mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 08mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L for coloured wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.36 Sqm of 10-12mm thick on vertical surfaces of wall over 10mm thick rendering and as per sample approved by GE complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. Make : Jaquar continental series - Cat Part No- CNS-WHT-85153005PP or equivalent in Cera/Parryware

S & F Vitreous china wash basin under counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make : Jaquar continental series - Cat Part No- CNS-WHT-705 or equivalent in Cera/Parryware

S & F Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, complete all as specified and as directed. Make : Jaquar Kubix series - Cat Part No- KUS-WHT-35901 or equivalent in Cera/Parryware

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. Make : Saint Gobin/Modi Gaurd

S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. Make : Jaquar continental series - Cat Part No- CON-107KW or equivalent in Marc/Kohler.

S&F Brass CP basin mixer central hole , for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions complete all as specified and directed Make : Jaquar clarion series - Cat Part No- CQT-23167B or equivalent in Marc/Kohler

S&F in repair 15mm angle valves, fancy type chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaquar continental series - Cat Part No- CON-059KN or equivalent in Marc/Kohler

S & F Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. Make : Jaquar continental series - Cat Part No- ACN-1121BN or equivalent in Marc/Kohler.

S & F Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make : Cera - Cat Part No- F3001211 or equivalent in Hindware/Parryware.

S & F CP brass soap dish, fixed in repairs, complete all as specified and as directed Make : Jaquar continental series - Cat Part No- ACN-1131N or equivalent in Marc/Kohler.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. Make: Jaquar continental series - Cat Part No- AKP-35781PFS or equivalent in Marc/Kohler

S & F cast copper alloy CP Health faucet with connecting pipe 1.0m long complete all as specified. MAKE : Jaquar continental series - Cat Part No- ALD-565 or equivalent in MARC/KOHLER.

S & F in repairs CP Jet Spray to EWC with connecting pipe 1.00m long complete all as specified.

S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.

S & F in repairs of 15mm bore size, 60cm long PVC connection complete all as specified and as directed. MAKE : PRAYAG/SYMET/GEM

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100mm size stainless steel butt hinges complete all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F designer board false ceiling with 4mm thick fixed over GI powder coated inverted Tee or 'L' section suspended from ceiling with 3mm thick GI wire tie with ceiling/trusses with suitable arrangement complete all as directed and specified (a) Main runner/ Cross tee size 29x24.7x0.8mm (b) Wall angle of size 22.2x22.2x0.65mm (C) Size of grid 600x600mm including dismantling of old ceiling with frame any size and description complete all as specified and as directed

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons or in any position etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving near 15 cm thick (below or above ground level).

M & L 20 mm thick granite (of any type) work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including rendering in CM1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding complete all as specified and as directed .

M & L 20 mm thick Granite (of any type) laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base.

M & L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 complete all as specieied and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 80 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path complete all as specified and as directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Fabrication & fixing of Modular kitchen cabinet & wardrobe/ cupboard made out of 18-20mm thick WPC boards with 2.00mm thick high glossy fabric colour laminate sheet of approved quality and texture on all exposed sides with edges band including providing cabinet for keeping basket/cutlery basket etc. complete all as specified and as directed. (Design and pattern as approved by GE). Make : Rajshree plastiwood or equivalent Note:- Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately).

Fabrication and fixing of 18-20mm thick WPC Boards with laminated fabric colour on both sides, fixing in partitions of Modular Kitchen cabinet and wardrobe/ cupboard complete all as specified and as dirfected. Make : Rajshree plastiwood or equivalent

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel thali basket (11-13 division) of size 500mm x 370mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel Plate basket (11-13 division) of size 500mm x 370mm x160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel Partition basket of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel grid basket (plain) of size 500mm x 520mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Continuous piano type hinges, mild steel bright finish or electro-galvanised with width of flaps 30mm, complete all as specified and as directed.

Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.

M & L for providing and fixing in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts nd bolts complete, including fixing the railing with necessary assosories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor/roof or the side of waist slab with suitable arrangement complete all as specified and as directed. Make: (1) Jindal (2) Tata (3) SAIL

M & L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & thoating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.

S & F in Repair 15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swimming point screwed down for iron pipe complete all as specified. Make : Jaquar continental series - Cat Part No- CON-309 KNM or equivalent in Marc/Kohler.

S & F in repairs brass chromium plated wall mixutre 3 in 1 system with provision for hand shower and overhead shower and suitable for and screwing to walls all as specified and directed. Make : Jaquar continental series - Cat Part No- CON-281KN