Provision of RCC over head tank of capacity 25000 gallon at Mil Stn Beas under GE Kapurthala

Amount

Note: Please refer Schedule 'A' Notes given on serial page No. 15 to 18 of tender documents.

Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' part-I brought forward from serial page No. 19

Lump sum price worked out by the contractor for FENCING WORKS as listed in Schedule 'A' part-II brought forward from serial page No. 20

Lump sum price worked out by the contractor for PATH/ HARDSTANDING WORKS as listed in Schedule 'A' part-III brought forward from serial page No. 21

Lump sum price worked out by the contractor for DRAINAGE WORKS as listed in Schedule 'A' part-IV brought forward from serial page No. 22

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' part-V brought forward from serial page No. 27

Lump sum price worked out by the contractor for SITE CLEARANCE WORKS as listed in Schedule 'A' part-VI brought forward from serial page No. 28

MISCELLANEOUS ITEMS (PART-VII) ( EXTERNAL WATER SUPPLY WORKS)

Supply and lay pipe ductile Iron , 100 mm dia, Centrifugally Cast , Class "K-9" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining complete all as specified and as directed. Make- Electrosteel/ Jindal/ Jai Balaji

Supply and lay pipe ductile Iron , 100 mm dia , Centrifugally Cast , Class "K-7" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining complete all as specified and as directed. Make- Electrosteel/ Jindal/ Jai Balaji

Repair to existing valve pits of internal dimensions 90 x 90 x 100 cms making good disturbed/dismantled brick work in cement mortar (1:4) and PCC flooring of 75 mm thickness in chamber in cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) and providing MS cover in replacement made out of MS sheet 4 mm thick duly welded to MS angle iron frame 50x 50 x 6 mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Construction of valve chamber of size 90 x 90 x 100 cms Internal size suitable for housing 150/100 dia sluice valve etc., with PCC 1:4:8 for foundation, solid block masonry type C-1 1:3:6 blocks set in CM 1:4 and PCC flooring 75mm in the chamber, sheet cover 4 mm thick double door type, fixed to MS angle iron frame 50x50x6mm embedded in concrete with suitable hinges and locking arrangements, including 2 coats of synthetic enamel paint over a coat of red oxide primer, with all necessary excavation and earth work, all as specified and and as shown on drg No. CEJZ/TD-1060/08 1/3 to 3/3

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine and make it finish with out any dammage of road, pavement, hard standing , complete all as specified and as directed by Engineer-in-Charge.

S & F DI pipe fittings such as Bends (any type, radius and angle ) Tapers any type (straight , bend, increasing, decreasing or double socket etc) Tee pieces single branch Y junction double branch cross (all sockets and spigot) , tail piece collars caps and plug suitable for DI pipes rubber gasket joints/ flanged type joints all as specified and directed by Engineer-in-Charge.

Supply,installation, testing and commissioning of Chemical Dosing system Model No VST-1005 alongwith injector Model No VDP-0550 Max pressure 5 Kg/ Sqcm & max flow rate 50 Litres/hr with following specification with complete accessories like lead tubing, connecting ferrules, check valves etc all as specified and as directed. Make- VARIMA from Ravi Enterprises, Kolkata or equivalent ISI Mark make. Specification :- 1. Preparation Tank Model No VST-1005 of net capacity 170 Litres of FRP dosing tank 650 mm x net height 375 mm + conical 300 mm gross height with stand 100 mm consisting of (a) Water inlet line (b) Outlet with Y strainer (c) Drain (d) Over flow (e) Conical bottom for sludge deposition (f) Pot hole with cover (g) Level guage (h) Agitator 120 W, 900 RPM, 1 Phase flange mounted motor with plastic shaft and impeller (HSN Code- 84798200) (j) Varima Dosing Pump/Injector (HSN Code-8413) Model No VDP-0505 Max pressure 5.5 Kg/ Sqcm & Max flow rate 5 Ltrs/Hrs

supply ,Install ,Testing & commisioning of SubmersibleMotor cum pump,multi stage (not less than 8 Stages) ,stainless steel body , electric driven 415 V, AC, 50Hz Three phase suitable for 250/300 mm dia bore well ( Casing pipe of size 80 mm) and of Capacity not less than 15 HP, discharge not less than 1100 LPM at 60 Mtrs Head including suitable size connecting piece/distance piece suitable to connect the pump with column pipe -01 No and including necessary arrangement for welding/fixing with pump end complete all as specified and directed by Engr in Charge.Make: Crompton /KSB /kirlosker.

Supply & Fixing PVC insulated submersible flat cable 03 core 1100 Volt AC Supply stranded copper conductor of size 6 sqmm for submersible Pump motor including connection, testing all as specifed and directed.Make : Havells / Polycab/Fenolax.

Supply, install, testing and commissioning of Star Delta starter panel of capacity 15 HP panel size 90cm x 90cm x 50cm enclosures cubical weather and vermin proof totally enclosed made out of 2mm thick CRCA sheet machine pressed of suitable size to operate on 3 Phase 4 wire system 415 Volts, 50 HZ double door with front openable with locking arrangement incl inner shutters for mounting switch gear etc, bottom Gland plate with sufficient numbers of circular cable entery holes, including PCC work, prewired complete duly powder coated with Aluminium bus bar of capacity 200 A,4 wire system 3 Ph & Neutral comprising of the following:- (i) MCCB 63 Amps FP, 415 Volt 25 KA thermal magnetic = 01 No of Make : Schneider/ Legrand /Siemens. (ii) On load Change over switch 63 Amp in open execution Cat part No INAE0063 of make indoasian or equivalent in HPL/L&T. (iii) Power contractor 3 pole 50Amp (AC 3 duty) AC control different level of power and control contacts, inbuilt 1 No + 1 NC Quxiliery contacts Cat part No LC 1D50A* of make : Schenieder or equivalent in Legrand

M&L for cutting the existing DI/CI pipe line of any type/size and making connection all as specified and diected by the Engr in Charge

siddharthenterprises

Sachdeva Builders