PROVN OF TOILET FOR STAFF OFFRS AT AIR FORCE FACULTY OF MILIT GIRINAGAR AND CERTAIN MINOR AND REVENUE WORK AT MILIT GIRINAGAR PUNE 25

Amount

(B/R PORTION) Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed. Note : Water proofing compound shall be paid under relevent item.

M&L for rendering 15 mm thick on brick surfaces in cement mortar 1:6 finished even and smooth without using extra cementcomplete all as specified and directed.

Supply only WPC complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on New surfaces of wall complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

M&L for RCC Nominal Mix type B1 1:2:4 (using 20mm graded aggregate) as in Roof beams, lintels, cantilevers, etc complete all as specified and as directed.

M&L for RCC Nominal Mix type B1 1:2:4 (using 20mm graded aggregate) as in slabs supported on walls, chajja, Roof beam, roofs , canopies, shelves & the like complete all as specified and directed.

M&L formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, overhangs etc also splays between floors and beams etc. complete all as specified and directed.

M&L formwork to soffits of suspended slab such as roof slabs, chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping). complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 5 to 10mm dia as in sturrips scut to length bebt to shap required including cranking, bending etc and bindidng and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type B1 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area area of each tiles ( 600 mm X 1200 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600mm x 600mm with using 32.5mm x 23.5mm x 1.5mm thick main tee, 25mm x 23.5mm x 1.28mm cross tee and 25mm x 23.5mm 1.2mm angle fixed to wall for false ceiling including necessary supporting hangar with 4.00mm dia GI wire nad 'J' hook bolts washer nuts for securing frame work to ceiling, suspended @ 120cm C/C both ways, size of grid shall be 605mm x 605mm complete all as specified and directed.

S&F for solid PVC coloured door frame of size 50 x 47mm made oit out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed.

S&F for factory made solid PVC moulded door shutter 28 to 30mm thick (sysles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

M&L for 12mm thick frosted toughened glass fixed to door and window and partition as directed by Engr-in-Charge including necessary wooden beadings, steel clamps, hinges nails, screw, complete all as specified and directed.

S & F for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S& F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix for vitreous china coloured wash down water closet EWC cascade type ‘P’ trap/ S trap including seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

S&F Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 540X360X150 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy swan neck pillar tap chromium plated with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.

S&F Chromium Plated Push type, auto closing concealed Urinal Flush valve with wall flange complete all as specified and as directed.

S&F Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F Chromium Plated Toilet Paper Holder complete all as specified and directed.

S&F soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia including brackets both side complete all as specified and directed.

S&F brass chromium plated bracket for towel rail complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per item 50.00 but 15mm bore complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as directed by Engr-in-Charge.

M&L for PVC (SWR) waste and vent pipe 100mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

S&F for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement complete all as specified and directed.

S&F 1000 ltrs capacilty, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20 mm high pressure with polythene float and fly nut complete all as specified and directed.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified.

M&L for 4mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete all as specified and directed.

M & L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed.

M&L cement concrete 1:3:6 type C12 (using 40 mm gde stone aggregate) as in foundation filling and mass concrete. complete all as specified and directed.

S&F rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy duty brackets framing (beam, tee, angle, channel or flat sections) inlcuding distance peices, cleats etc complete all as specified and directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M& L for mild steel black sheet in door 1.60 mm thick in steel gate and in similar work cut to size ,holes punched ,including round heraded screws ,cut nails or revets,and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sams including or turning up, mitred complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth.Complete all as specified and as directed.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed.

S & F collapsible steel gate ,top hung,consisting of channel pickets ,pivoted flat bars,top and bottom runners ,brass handles etc,as specified,erected in position and securing runners with holdfast and brackets complete all as specified and as directed.

S & F flat iron fillets ( for securing wire mesh any type) including all necessary drilling ,bolting,or riveting ,etc, and similar work confirming to Fe -290 Gde E-165 complete all as specified and as directed.

S&F welded steel wire fabric not exceeding 4 kg per Sqm in weight, complete to wood or iron members complete all as specified and directed.

S&F 250mm long Mild steel sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section,complete all as specified and directed.

S&F stainless steel butt hinges, of size 100 mm complete all as specified and directed.

S&F 150mm size, mild steel, Hasp and Staple,safety type, brass with mild steel hinge pin, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F for steel water tubes 25 mm bore medum grade galvanized with all fittings and fixed complete to walls, ceiling or laid in floor, complete all as specified and directed.

M&L for one coat of synthetic enamel paint over red oxide primer on old steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

M&L for writing letters or figures (Block. Roman, Italic or Indian) exc. 30 cm high complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034, Glazing clips - 4407

S & F for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S & F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Incl all necessarly Fittings ) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge .

S&F of gyproc white water proofing gypsum moisture resistance boards rectangular for false ceiling 10 mm thickness moisture resistance < 5% total water absorption , acoustic waterproofing suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity in module sizeof 600x 600x10 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions Complete all as specified and as directed. ( Make : Saint Gobain or equivalent make)

Dismantling wall /ceiling board (fiber,pulp,insulation,etc.incl all fitting ) or insulation board /slab/blankets, any thickness, including cover fillets.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointed in any mortar as specified.

M & L for vitrified Ceramic dark shade ,ultracharged colour tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes

M & L for glazed ceramic tiles in colour tiles vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting /dados over 15 mm rendering in CM 1:4 as specified & directed.

S&F wall panelling on existing wall surface consisting 12 mm thick prelaminated waterproof MDF boards plain colour MDF inclusive prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workof solvent cement and fixing at site on MDF frame as per specification and drawing to be fixed on wall The edge and periphery finally to be covered by extruded MDF corner angles, brass strips use as beading/fillet in panelling complete all as specified and as directed by Engr-in-Charge.

M & L second class soft wood in scantling clean swan complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm each complete all as directed

Supply and fix for 30mm thick flush shutters solid core construction, with laminated decorative surface both sides with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

S & F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Demolition of stone Brickwork or stone/ boulder masonry, laid dryBrickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles All as above but built in cement mortar or cement mortar

S & F for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

S & F for 300 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

(E/M PORTION) M & L for Point wiring with proper colour coding complete with and including PVC insulated, unsheathed, flexible bright annealed multi stranded copper conductor single core flame retardant low smoke (FRLS) cables 1.5 Sqmm 1100 volts grade drawn through in and including heavy grade, rigid non-metallic PVC conduits 25 mm or higher dia as required at site, totally concealed in walls / floors /ceiling and surfaces on trusses by means of saddles & clips etc including all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and modular metal boxes, totally concealed in walls with modular plate including modular cover plate, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches, sockets fan regulators etc; including 1.5 Sqmm 1100 V grade PVC insulated FRLS, unsheathed flexible, multi stranded, copper conductor cable(green colour) as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, all as specified and directed for following :- (a) One light/ Fan point controlled by one, one way switch 6 Amps 240 Volts.

(b) One fan / exhaust fan point controlled by one switch and one regulator complete all as specified and directed.

(c) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed.

All as per description of serial item No 105.00 here -in -before but for 3-pin socket out let 15 Amps on independent board with 4 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous 4 Sqmm earth wire.

S&F modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S&F ceiling rose surface backlite 65 x 50mm 3 terminals complete all as specified and directed.

S&F for recess mounted 2' x 2' square LED panel 36 watts, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling

S&F LED batten 10 watts, 2 Feet, with electronic driver including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all s specified and directe by Engr-in-Charge.

S&F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body louvers, including connected with 3 core 1.5 Sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and directed.

S&F exhaust fan, AC, single phase, 240 V, 225 mm sweep, Metal body with metal blades metal louvers, including connected with 3 core 1.5 Sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and directed.

S&F double door sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with PI 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

S&F of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, 'C' series complete all as specified and directed.

S&F of MCB single pole, and 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, 'C' series complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN DB's 2 way with MCB complete all as specified and directed.

S&F 30 watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening separate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable multistranded on the surface through and including suitable size of PVC conduit with its accessories all as specified and directed by E-in-Charge for the following (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire.

Supply, laying and testing cable XPLE insulated, creened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 aq mm 2 core.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil including forming bottom surfaces etc. complete all as specified and directed.

Returning, filling in cluding spreading levelling watering and well ramming in layers not exceeding 25cm thick complete in soil complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositing where directed at a level not exc 50 mtrs above the starting point complete all as specified and directed.

Supply & laying 50mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground/ road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirements complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to glavanised earth lead wire 4.0mm dia by means of bolts, nuts check nuts and washes of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicateng testing on compleiton complete all as specified and directed.

Supply only CO2 Cylinders 45Kg Capacity including clamping,bolts/Nuts/washers complete all as specified and directed by Engr-in-charge.

Supply only Master Valve required as on site complete all as specified and directed by Engr-in-charge.

Supply only 150 Bar Brass Co2 slave Valve for 45 kg Cylinder complete all as specified and directed by Engr-in-charge.

Supply only 1/2" PVC Lay Flat Water Pump Discharge Hose With Aluminum Pin Lug Fittings, Heavy Duty Reinforced Pool Backwash Hose Assembly complete all as specified and directed by Engr-in-charge.

Supply only only Brass NRV 1/2 Inch (Non Return Valve 1/2 Inch) including all required fittings complete all as specified and directed by Engr-in-charge.

Supply only Interconnecting hose 1/2'' With Aluminum Pin Lug Fittings, Heavy Duty Reinforced Pool Backwash Hose Assembly complete all as specified and directed by Engr-in-charge.

Supply only Cylinder Battery Frame with manifold complete all as specified and directed by Engr-in-charge.

Supply only Safety relief valve as required at site complete all as specified and directed by Engr-in-charge.

Supply only Bleeder valve 1/2'' dia complete all as per specified and as directed.

Supply only Pressure Switch required as per site or as per Engr-in-charge complete all as specified and directed by Engr-in-charge.

Supply only Discharge Nozzle as per required on site complete all as specified and directed by Engr-in-charge.

Supply only smoke detector complete all as specified and directed by Engr-in-charge.

Supply only Fully Automatic Abbort Manual Call Point Operating Voltage 24VDC, IP-50, Operating Current 30mA, color MCP Yellow complete all as specified and directed by Engr-in-charge.

Supply only Fully Automatic Emergency Release Manual Call Point Operating Voltage 24VDC, IP-50, Operating Current 30mA, color MCP Green complete all as specified and directed by Engr-in-charge.

Supply only Hooter Mini Horn with BackBox, Operating Voltage 24V DC, Operating Current 40mA, Sound Level 85dB@1m, Operating Temperature 0 – 49° C / 32-120° F, Sounder Type - Piezo Electric Type, Tone Type- Fire Engine Siren, Material : ABS Plastic,Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D mm, Back Box : 95 H mm X 75 L mm X 58 D mm, Mounting Type : Surface / Flush Mount complete all as specified and directed by Engr-in-charge.

Installation, Testing, Commissioning of the above System from item No. 1.0 to 15.0 complete all as specified and directed by Engr-in-charge.

Supply, Installation, testing & commissioning of 2 Zone Gas Release Fire Alarm Panel, Display size 16 x 2 LCD Dot Matrix Display, Power Source 120 - 220V AC, 60 / 50 Hz, Standby Time 24V DC, complete all as specified and directed by Engr-in-charge. Make: Ravel, model 2 Zone-RE 120Gr ( panel ) or equivalent.

S&F socket 2-in-1 5 pin 6 Amps Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 6 Amps single pole one way complete all as specified and as directed.

Supply and install pipe galvanized, “Medium class”, including fittings 25 mm (1'' dia) complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable, multistranded on the surface through and including suitable size of PVC conduit /Casing caping fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the size of 2x6 sq mm and 1x6 sq mm as earth wire complete all as specified and as directed

Supply and install of Split AC indoor/outdoor complete with cordless remote control unit for better indoor air quality of capacity 2 TR 5 star including Stand for outdoor unit & additional 5 mtr drain pipe, 3 pin power plug pin top including dust filter, air purifier, 3.5 meter lenth connecting pipe of copper and 3.5 meter connecting cable complete all as specified & directed by Engr-in-charge.

Supply and fixing Single pole and neutral enclouser with two pin and earth plug and socket complete with one single pole MCB with 240 V 20 AMPs complete all as specified & directed by Engr-in-charge.

Supply and fix suction and discharge copper tubing pipe 3/8" and 5/8" for split type AC including provision of insulation on tubing, PVC insulated flexible multistranded copper cable 3 core 2.5 sqmm all as directed by Engr-in-charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth and making good disturbed surfaces complete all as specified & directed by Engr-in-charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified & directed by Engr-in-charge.

Supply, laying, testing and connecting LT UG cables of size 35 sqmm 3.5 core 1100 Volt grade XLPE insulated and PVC sheathed, armoured, with multi stranded aluminium conductor, heavy duty confirming to IS - 1554 part-I, including cable glands, cable lugs in LT panel/ FP Box etc including material and labour for all jointing/connecting material as required, cables laid in trenches/ducts/under plinth floors passing through pipes etc complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard dense soil complete all as required and directed by Eng-in-charge.

Supplying and laying of following size DWC pipe 40 mm ISI marked along with all accessories etc confirming to IS 14930, part II complete with fitting and cutting, jointing etc. in trench/open, for LT UG cable protection complete all as specified & directed by Engr-in-charge.

M&L for cutting of bituminous road/floor for laying of pipe/cables not exceeding 30 cm wide and not exceeding 60 cm deep including refilling/with material and watering well ramming/ compacting and making good with PCC 1:2:4 type B-1, 100 mm thick complete all as specified and directed by Engineer-in-charge.

Supply and fixing GI tubing (ISI Marked), light grade 40 mm bore for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed.

S&Fix MCCB DB VTPN 4 ways,with metal double door, IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

S&F MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA complete all as specified & directed by Engr-in-charge.

S & Fix sheet metal enclosure distribution board SPN, 4 way 240 volts, single door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified & directed by Engr-in-charge.

M & L for cutting holes into or through cement concrete slabs, chajjas, etc. reinforced for making holes for split AC pinning including making good the disturbed surfaces and packing as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting DBs etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

S&F socket 5 in 1, 6 /16 Amp Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 16 Amps single pole one way complete all as specified and directed.

S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4step complete all as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded concealed in the surface through and including suitable size of PVC conduit on walls/roofs/ceiling with its accessories all as specified and directed by Engr-in -charge for the following :- (a) 2x4.0 sq mm and 1x4 sq mm as earth wire

(b) 2x6.0 sq mm and 1x6 sq mm as earth wire complete all as specified and directed.

S & Fix Metal plug and socket DB's with MCB 20A SP for AC complete all as specified and directed.

S & F PVC Conduits Min 25 mm size run in walls/surface for provision for telephone cable fixed on wall concealed and including dismantling of old pipes, cutting chasis, pinning in and making good to disturbed surfaces etc complete all as specified and directed b Eng-in-charge.

S&F Rj45 Double Port Network Ethernet LAN Wall Outlet Plate Socket Panel set of 2 complete all as specified and directed b Eng-in-charge. Note:- cable will not be provided by the MES.

M&L for removing of existing split Acs of capacity 1.5/2.0 TR and installion , testing & commissioning the same after servicing, refilling of refrigerant Gas, pin top industrial type including electrical connection, drain pipe, stand for outdoor unit complete all as specified & directed by Engr-in-charge.

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with bus bars with front openable cover single pole and neutral 12 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed.

S&F MCB SPN 63 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed.

Supply and install of Split AC indoor/outdoor complete with cordless remote control unit for better indoor air quality of capacity 1.5 TR 5 star including Stand for outdoor unit & additional 5 mtr drain pipe, 3 pin power plug pin top complete all as specified & directed by Engr-in-charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 160 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and directed.

M&L for PVC drain pipe for additional length as required on site complete all as specified and directed by Engr-in-charge

M/S P D TUPE (BID ID -3118410)