Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Fee/PreQual/Technical/Finance S O ASSIAN NO 5 396 DURAISAMY PURAM PICHAMPALAYAMPUDHUR TIRUPUR 641 603 | TIRUPUR | TIRUPUR | TAMIL NADU | 641603 | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹2.0 L+₹5,897.64 (3.12%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | BABU L1 | MUTHURAMAN SUSILA L2 |
|---|---|---|---|---|---|
| 1.00 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 25.8 | M2 | 3,860 ₹99,588 Lowest | 3,980 ₹1,02,684 |
| 2.00 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. | 2.1 | M2 | 6,570 ₹13,797 Lowest | 6,770 ₹14,217 |
| 3.00 | Manufacturing,supplying and Fixing in position of Linear modular workstation model with keyboard tray and dividers standardised and customised for Office Work Specification for Linear seater modular workstationThe Table top shall be provided at a height of 750mm from floor level and 600mm width at top etc complete and as directed by the departmental officer | 5.9 | R.M. | 5,940 ₹35,046 Lowest | 6,120 ₹36,108 |
| 4.00 | Supply of first quality plastic chair etc complete and as directed by the departmental officer | 6 | Nos. | 1,980 ₹11,880 Lowest | 2,050 ₹12,300 |
| 5.00 | GST | 1 | Nos | 28,855.98 ₹28,855.98 Lowest | 29,755.62 ₹29,755.62 |
Tender Value
₹1.9 L
EMD Value
₹1,920
Closing Date
24 Sept 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer, PWD., Buildings (C and M) Division, Tirunelveli
Providing Partition arrangements for e-Sewa Kendras in the existing Building at Mahila Court Complex at Tirunelveli in Tirunelveli District.
2026_PWD_703010_1
4(10) EE/2026-27 dated.08.09.2026
Open Tender
Civil Works - Buildings
Lump-sum
90 days
Mahila court in Tirunelveli
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹1,920
30 Sept 2026
10 Sept 2026
25 Sept 2026
10 Sept 2026
24 Sept 2026
10 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 25.8 | M2 | 3,899.51 | ₹1,00,607.36 |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. | 2.1 | M2 | 6,632.39 | ₹13,928.02 |
| 3 | Manufacturing,supplying and Fixing in position of Linear modular workstation model with keyboard tray and dividers standardised and customised for Office Work Specification for Linear seater modular workstationThe Table top shall be provided at a height of 750mm from floor level and 600mm width at top etc complete and as directed by the departmental officer | 5.9 | R.M. | 6,000 | ₹35,400 |
| 4 | Supply of first quality plastic chair etc complete and as directed by the departmental officer | 6 | Nos. | 2,000 | ₹12,000 |
| 5 | GST | 1 | Nos | - | - |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
Tendercondition10.pdf
Tender Documents • 0.97 MB
BOQ_845075.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .