SPL REPAIR TO BATHROOM AND TOILETS AT BLDG NO P 25C, P 25CL, P 26C, P27C, P27C2 AND P 27C4 AT 21 ENGR REGT AND SPL REPAIR TO BLDG NO T 914, T 926 OR LIVING AT 986 LT AD REGT, RATION STORE BLDG NO T 75 AT 146 EW COY OF BR I BR II, E

Amount

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and as directed.

Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work. complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws/nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.

Demolition of cement concrete (unreiforced) in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed.

Demolition of cement concrete (unreiforced) in any description and any position not otherwise specifically provided for.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed.

Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as directed by Engr-in-charge.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.

M&L for PCC type D2 (1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation filling and mass concrete, complete all as specified and as directed.

M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika

M&L for preperation new concrete /plastered surface of wall any description,applying two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed.

M & L for two coat of cement base paint on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

S&F anodised aluminium (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings complete all as specified

M&L sheet glass 5.5mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed paneled shutters (two panels) with panels with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window/ventilator shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed by Engr-in-charge.

S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. complete all as specified and as directed.

M&L Preparation of New wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and as directed.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed.

S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F in 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.

Dismantling water tank exc 250 & n exc 500 litre and removing to storel all as specified.

S&F trippled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

S & F in repair Chrominum plated brass soap dish (Oval shape) to walls (size not less than 125mm long) complete fix to wall complete all as specified and directed by Engr-in-Charge

S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F grating doom 100mm dia of PTMT (min weight 25gms) complete as specified and directed.

S&F in repairs towel Hnager with 6 Nos of pin and 600mm long Cromum plated etc complete fitted as per sepcified and directed by Engr-in-charge.

S&F in repairs 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and as directed.

S&F in repairs 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair. complete all as specified and as directed.

S&F in repairs 15mm dia angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as spd.

S & F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and as directed.

Taking up or down 25/32 mm bore steel/PPR tubing and connections and set aside for re-use or removal to store, complete all as specified and as directed.

S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes laid in trenches and jointed all as specified .

S&F in PVC(HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes fixed with wall and jointed all as specified .

S&F 110 mm dia (SWR) bend any redius complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore vent cowl complete all as specified, complete all as specified and as directed.

M&L for Cast iron Nahani trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L for PCC 1:4:8 TYPE D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismentling. complete all as specified and as directed.

S&F in repairs 15mm dia angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes, complete all as specified and as directed.

S&F in repairs PVC connectons 15 size with PTMT nuts (length 600mm). complete all as specified and as directed.

S & F in repair Vitreous China wash basin Fency type pedestal pattern , white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and as directed.

S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with PCC type B-I 1:2:4 , using 20 mm graded crushed stone aggregate.

S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel shromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F CP toilet jet spary ABS with double lock 1.2 mtr CP tube stainless steel flexible hose all as specified and as directed.

Supply & Fixing sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12 cm wide with chromium plated bracket gourd and railing 60 cm long, complete all as specified and directed.

Supply & Fixing sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F in repair 15mm bore dia pillar tap cast copper alloy fancy type high pressure screwed for iron pipe and fixed in repair.complete all as specified and as directed.

S & F in repairs 750 mm long, 32/ 40 mm dia, PVC flexible Waste pipe for sinks / wash hand basins. complete all as specified and as directed.

S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M & L for two coat of synthetic enamel paint over one coat of red oxide priming including preperation of new steel surfaces over 10 cm width or grith not otherwise described. complete all as specified and as directed.

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275, complete all as specified and as directed.

Ditto all as item No 89 above but except sheeting. complete all as specified and as directed.

S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hi, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.

M&L for preperation and removal of old Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

M&L for preperation of new plastered wall surface of wall any description and applying three coat of white wash complete all as specified and as directed.

S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified

M&L for hardcore of broken stone gauge n.exc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed.

M & L for 100mm PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floor all as specified..

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings, etc. complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specifed and directed.

M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and as directed

M&L for PCC type D-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc, complete all as specified and as directed

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified

S&F Pre painted galvalumealuminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified

M&L for (350 x250mm) x 7 mm / 450mm x 350mm x 7mm glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck backing coat bed below tile for dado/skirting CM 1:4 and removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

S & F 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr -in-Charge.

S &F Flush shutters 30mm thk, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge

M&L Plain solid straight chowkats and frames rebated and put together with glue pinned joints supplied and fixed of second soft wood complete all as specified and directed.

S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F in repairs, 20 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed by Engr-in-Charge

S & F in repair 15mm bore angle stop valve standard of PTMT any color high pressure screwed for iron pipes and fixed complete all as specified and directed by Engr-in-Charge

S & F Vitreous china wash basin white flat back size 550 x 400 mm including including CI brackets of irosn 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed by Engr-in-Charge

S&F in Repair Vitreous China Urinal full stall type white (excluding flushing cistern flush pipe and wast pipe) Vitreous China Urinals bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge

S & F in repair tubular towel rail , 20mm dia 600mm long of chromium fixed and including chromium plated brass screw and wooden/plastic cleats (min weight 270gms) D type 4, complete all as specified and directed by Engr-in-Charge

S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed by Engr-in-Charge

S&F in repairs PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified and directed by Engr-in-Charge

Dismantling water tanks and removing to store Exe 500 and n exc 1000 ltrs capacity

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge

M&L for 15 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and directed by Engr-in-Charge

M&L for preperation of new plastered surface and apply two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge

M & L for two coat of oil bound distemper on old decorated surfaces of walls incl prepartion of surface complete all as specified and directed by Engr-in-Charge

M & L for two coat of cement base paint on old decorated surfaces of walls incl prepartion of surface complete all as specified and directed by Engr-in-Charge

Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors with screed bed or bedding layer of mortar 15 mm thick for laying floor finishes and in Cm 1:6 and pointed in white or coloured cement to match all as specified and directed.

M&L for 6mm thick prelaminated board, solid core, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

M&L for wind ties as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Stee complete all as specified and directed by Engrr-in-Charge.

Dismantling structural steel work including doors and gates of any description.

M&L for one coat of synthetic enamelled paint on new or previously untreated surface of any description, not otherwise described, over 10cm width or girth including preperation

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as specified and directed.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on Same board complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed.

All as item No 139 above, but using cables 4 Sq mm size complete all as specified and directed.

Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed.

Supply and replacement of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as specified and directed.

Supply and replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as specified and directed.

Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways complete all as specified and directed.

Supply and fix in replacement of MCB TPN 63 Amp 415 Volts, 50 Hz AC, 'C' series complete all as specified and directed.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x 4 sq. mm + 1x 4 sq. mm earth wire complete all as specified and directed.

Supply and fixing in repalcement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type ( Cool white )with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and Fixing in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old unserviceable exhaust fan & Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply, install, testing complete water heater, storage type steel body with copper inner tank and heating element upto 2 kw capacity 25 ltrs,BEE 5 star rated complete with accessories such as safety valve ,thermostate,NRV,connection ppipes complete all as specified and directed.

Supply and fix steel metal enclosure with socket plug top and neutral with two pin and earth plug with one mcb sp 20 Amps 240 volts complete all as specified and directed.

Supply & Fix MCB SPN 40 Amps rating 240V, 10 KA 'C' curve complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 complete all as specified and directed.

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete all as specified and directed.

M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying UG cavble in trenches on plan and n exc 1.5 m in depth in any type of soil and getting out complete all as specified and directed.

M&L for Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m,complete all as specified and directed.

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified and directed.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid for complete all as specified and directed..

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed.

Taking down old unseviceable strret light fitting and Supply and fix in replacement of LED Street light fitting 70 watt with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass/PolyCarbonate, LED lenses, surge protector, BIS electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, etc complete all as directed.

Supply and laying in replacement of XLPE insulated, armoured, haeavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4.0 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete all as specified and directed.

All as item No 139 above, but using cables 2.5 Sq mm size

Supply and fix lamp holder insulated body with back plate.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volt 8 Ways complete all as specified and directed .

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mcomplete all as specified and directed by Engr-in-Charge.

S & F in replacement of old U/S decorative durable LED batten fitting of 18/20W , 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube of any capacity, 4 feet long (white colour) tube having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge.

S&F in replacement of old U/S LED Mirror light fitting of 9/10 W and type 230 volts box type , with standard specification etc complete withh all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

S&F in replacement of Old U/S Lamp LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED LED bulk head fitting 10 watt in capacity complete with IP 65/66 protection complete.

Taking down unserviceable LT U/G cable of size 10 Sqmm 2 Core complete all as specified.

Supply, laying, jointing and testing LT underground cable heavy duty 1100 volts grade PVC ins 16 Sqmm 02 core complete all as specified.

S&L in replacement of Galvanized iron tubing 'light grade' 40 mm bore, with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with clamps including bolts, nuts & washers, including taking down old steel tubing and connections complete all as specified and directed.

Deduct Schedule of Credit of Rs (-) 176826.50 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

PARIDHI CONSTRUCTION (BID ID -3343052)