PROVN OF CERTAIN MINOR WORKS AT URBAN VILLAGE, CASSEL ROAD AND MANEKSHAW MARG UNDER GE (EAST) DELHI CANTT-10

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in- Charge.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slab, & similar works complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed by Engr-in-Charge.

S & F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in ridges hips, vally gutter, drip and straight flashing , fixed with self tapping screws etc complete all as specified and directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and directed

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge.

Earth Soil spreading , levelling in layers n.exc 25 cm thick each layer with well ramming including watering as required under the floor complete all as specified and directed by Engr -in Charge. (Note :- Earth Soil available surplus soil from the excavation at ground )

M&L75 mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 complete all as specified and dirtected by Engr-in-Charge .

M & L Coloured Glazed ceramic tiles in vertical surface 600x300x7-8mm / 450x300x7mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S & F box type steel ventilators with shutter including hings , handels ,galzing bar without wire mesh etc all as specified and directed.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door/cup board shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S & F stainless steel Butt Hinges of size 100 mm with ss screw complete all as specified and directed

S&F 150 mm size aluminium handles cast type anodised complete all as specified and directed

S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Material and labour for preparation of new surface decorated brick/concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint over a coat of cement primer etc complete all as specified and directed by Engr -in Charge.

M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces, complete all as specified and directed.

M&L for 3 coats of white wash on wall including preparation of newly plastered wall surfaces, complete all as specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surface of any description over 10 cm width or girth including preparation of surfaces complete.

M&L for hard core of gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface with broken brick aggregate complete all as specified and directed by Engr -in Charge.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr -in Charge.

S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and to flushing pipe antisyphonage pipe, including sheet cover and making good to floor complete all as specified and directed.

S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket ,32mm bore PVC flush pipe complete all as specified and directed

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces including all fittings complete all as specified and directed.

All as per description of srl item No 36 here-in-before but 20mm bore.

S & F rotational moulded polythene, water storage tank 1000Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including 20 mm flot ball brass valves high pressure with polythene float and flynut complete, Aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 20mm - 210 gms) complete all as specified and dirtected by Engr-in-Charge .

S&F 15 mm angle cock, chromium plated brass with flange complete. (Make: Jaquar/ Marc/Kohler)

S&F 15 mm bore bib tap, chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specifed and directed. (Make: Jaquar/ Marc/Kohler)

S&F grating doom 100mm dia of PTMT complete. (Make: Polytuf/Jindal/ Prayag)

S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or floor or on walls complete all as specifed and directed.

S & F 75 mm bore PVC cowls

S & F 100/110 mm bore PVC floor trap , with ss grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or on wall completed all as specified and directed

S & F 110 mm bore PVC (SWR) bends with acess door completed all as specified and directed

M & L for 100 mm bore thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing completed all as specified and directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for Vitrified Ceramic Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete.

M&L for vitrified coloued Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36sqm,on vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but nexc 2 sqm each complete all as spd

S&F 15mm dia bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-309 KNM and as approved by GE

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167 KNB and as approved by GE

S&F in repair Wall mixture with CP Telephonic shower pipe fixed over wall surface as per manufacturets mannual and Square Over Head shower (200mmx200mm) including easy flex shower tube with hand shower 68mm dia round shape single flow (ABS body chrome plated with rubit cleaning system etc complete all as specifed and directed Make : JAQUAR SHFLR 5281N or Hindware equvalent.

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and to flushing pipe antisyphonage pipe, including sheet cover and making good to floor complete all as specified and directed.

S&F in repair 10ltrs PVC valveless, syphonic ac-tion type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed. (Make: Polytuf/ Jindal/Prayag)

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and waste fitting 32mm dia , CP for WHB with long screwed shunks and nuts complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as spd & directed. (Make: Jaquar/Marc/Kohler)

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed. (Make: Jaquar/Marc/Kohler)

S&F CP health faucet with 1.00mtr long CP flexible pipe as per approved samplecomplete all as spd and directed. (Make: Jaquar/Marc/Kohler)

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete. (Make: Jaquar/Marc/Kohler)

S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water complete

M&L for two coats of oil emulsion distemper on new plaster surfaces of wall over a coat of interior primer including prepration of surface complete.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area n exc 1.5 Sqm each complete all as spd

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each complete all as spd

S&F powder coated aluminium frame for windows and ventilators with one or more rebated incl jointing cleats for fixing etc complete all as specified

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 4.5 mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary frame work of 2 mm thick aluminium section, joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge. Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified. Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and directed

S&F Sheet glass, 4 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F in repair two way bib tap 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

Supply only “Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing over telescopic channel. ( Make: Godrej Cat part no 6132 or equivalent approved by Engr-in-Charge”

Supply only “Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved quality with suitable arrangement for fixing over telescopic channel. Make: Godrej Cat part No 6136 or equivalent approved by Engr-in-Charge. ”

Supply only Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing over telescopic channel. Make: Godrej Cat part No 6121 or equivalent approved by Engr-in-Charge”

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm®

M&L 4mm thick desginer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaqaur Cat Part No. ARI-39041 or equivalent in Marc/Kohler as approved by GE)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S&F in repair SS soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete. (Make: Jaquar/Marc/Kohler)

S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and smooth without using extra cement complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely).

Supply only liquid water proofing compound complete all as specified & directed.

M & L for angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E complete all as directed by Engr-in-Charge.

S&F Mild steel screw bolts 5 to 10 mm dia ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , n exc 5 cm long complete all as specified .

S & F expanded metal n .exc 4 kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

M&L providing cement concrete 1:2:4 Type B-0 (Using 12.50 mm graded stone aggeregage ) set in CM 1:6 Size as per site requirement as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and in kerb stone rounded and chamfered on edges incl necessary form work etc complete all as specified and directed by Engineer in Charge.

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including necessary reinfocement, complete all as specified and as directed.

PCC (1:2:4) type B1 using 20 mm graded agg as in benching, surface channel, in drain etc complete.

M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, such as skirting, dados , verticale surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh hall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

S & F anodised aluminium door shutters, poweder coiating of any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F stainless steel square/round bar as in window grills, design & pattern as approved by GE, complete all as specified and directed.

S&F and fabrication of wardrobe/ cup board made out of 18-19 mm thick PVC board of density 600 kg/cum laminated sheet on both sides incl PVC lipping/tape on exposed surface , color as approved by GE, complete all as specified and directed.

S&F Continuous (piano) hinges(width of flaps 40mm when open , mild steel , bright finish or electrogalvanised

S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified

S&F 150mm Brass handle, cast type, polished bright complete all as specified and directed

S&F stainless steel 100mm long Hosp and Staple, Safety type and fixed with screws complete.

S&F 150mm stainless steel handle polished complete all as specified and directed.

S&F 65mm size brass cup board lock, 4 lever grade I of superior quality complete all as specified and directed.

S&F Drapery rod 18-20mm dia stainless steel pipe with steel finish 1mm thick including steel brackets etc including connected items for wardrobe/ CB etc complete all as specified and directed.

M & L for PCC 1:3:6 type D2 using 40mm graded stone aggregate as in foundation etc complete.

Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering, complete all as specified and as directed.

Materials and labour for 75mm thick plain cement concrete (1:4:8) Type D2 using 40mm graded aggregate in sub base of floor complete all as specified and directed.

Materials and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

M & L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in CM (1:4) on fair faces of brick work or concrete surface complete all as specified and directed. Note : water proofing compound shall be measured and paid separately).

M & L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

M&L for 50 mm thick Sand filling under floors or in foundation including watering & consolidation slab including rubbing & polishing complete.

M&L Machine pressed precast conctete interlocking paver block any shape and size with grey cement & pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade & polishing complete

S&F for factory made solid PVC moulded door shutter 28 to 30mm thick(stile) with 2, or 6 raised pannel design with two mm thick mounted PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing with two nos 125mm alu door handle, two nos 150mm alu tower bolts and 03 nos 100mm hinges complete (Make: Rajshree Plastiwood Ltd,Sintex, M/S FENESTA)

Providing and applying waterproof cement based 1 MM thick over the new plastered/ old painted wall/ ceiling after scrapping to prepare the surface even and smooth in following stages complete all as specified and as directed :- (i) Mix the putty powered by adding 40-50% water and mix it with Putty mixer (Putty mixier capacity of min 2.5 kg putty per minute). (ii) Allow 6-8 hrs time to dry the putty surface.

Providing and applying two coats of smooth acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10 Sqm diluted with water in 2:1 ratio applied over and including a coat of primer @0.90 Litre/10 sqm complete all as specified and directed.

M&L Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weighing not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, including taking down old existing window complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

THE LOTUS BUILDTECH (BID ID -3310280)

K S CONSTRUCTIONS (BID ID -3314176)

Akhil Enterprises (BID ID -3314034)

imran construction company (BID ID -3314524)