SPL REPAIR WORK TO BLDG NO P-31 (SINGLE OFFR MD ACCN) AND PROVN OF FLOORING TILING IN MES BLDG NO MES-27 AT ARMY CAMP JAMSHEDPUR UNDER GE RANCHI

Amount

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete.

Demolition of cement concrete of any description and in any position complete .

Brushing neat cement slurry with 3kg of cement per sqm.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level complete (liquid WPC shall be measured seperatly).

M&L providing, cement concrete 1 : 2 : 4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges with using water proofing compound(liquid WPC shall be measured seperatly) complete all as specified and directed.

M&L bedding layer of mortar 10mm thick finished fair and even in CM 1:4 mixed with liquid water proofing compound (liquid WPC shall be measured seperatly).

Supply only liquid water proofing compound

M&L Cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvented primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed.

M&L for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface before laying of APP Membrane.

M&L APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with torch sealing with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions and as directed

M&L applying protective coating with bituminous based aluminium/Heat resisting paint in two coats complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete .

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using on wall finishing the surfaces even and fair without using extra cement.

M&L 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking of shutter from framed) complete.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 Sqm each with shutter (without taking of shutter from framed) complete.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each and removing from site.

M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed sheet PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making dismantaled portion in CM (1:3) or cement concrete 1:2:4 Type B-1,Depth of embedded portion of Holdfasts not exc.half brick complete.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 all as specified & directed.

M&L 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F Factory made solid panel PVC Skeleton moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wire gauzed i.e. panel will be of wire gauze,The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmly.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

Dismantling steel window and ventilators including guard bar etc complete and removing to MES store all as directed at site.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .

S&F aluminium anodised aluminium window shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter Including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; as specified etc all as specified and directed.

S&F aluminium anodised aluminium ventilator shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter Including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; as specified etc all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples

S&F butt hinges 100mm long medium weight cold rolled MS all as specified and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 .

S&F 150 mm long aluminum anodized barrel tower bolt extruded section.

S&F 100 mm long aluminum anodized barrel tower bolt extruded section.

S&F aluminum handles cast type anodize 150 mm long.

S&F aluminum handles cast type anodize 75 mm long.

S&F 300 mm long of bolt Mild steel sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate of Brass all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site.

All as item No-43 above but for 20 mm dia bore pipe.

Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.

S&F 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.

Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L 15 mm thick screed bed or bedding layer in CM (1:6) to receive floor finishes.

M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match .

All as item No 52 above but in vertical surfaces

M&L 10 mm thick cement plaster in CM (1:4) for backing of tiles complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 300x450x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

Dismantling of boarding any description, fixed in any position with screws all as specified.

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site.

M&L 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and directed.

M&L 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore of any radius .

S&F PVC (SWR) bends 75 mm bore of any radius .

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door .

S&F 75 mm bore PVC (SWR) vent cowl.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR)WC connector with lip ring.

Demolition and breaking up drain pipe 100 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) sat in cement mortor.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L 150 mm dia of reinforced concrete pipe, class NP2, laid and jointed complete with collars.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg for concrete bed to drain pipes including , packing under and haunding against the sides of pipe, after they tested for 150 mm dia pipe.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) Complete.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete .

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in cover slab, shelves, and similar work set in CM (1:4) complete all as specified and directed.

M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specified and directed.

M&L mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with W.P.C (W.P.C will be measured and paid separately) complete all as specified and directed.

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved .(make- Essco, cat no MQT-5178)

S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F in EWC sheet cover to match EWC complete all as specified and directed.

S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.

S&F in Repair for vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178)

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no SQT-516KN)

S&F PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

Demolition of cement concrete (reinforcement) Water Tank any description and positin not other wise specifically.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.

M&L preparation of old decorated surface of walls by brooming down and wire brushing etc and applying two coats of white wash on wall complete all as specified and directed. .

M&L Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash to ceiling complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of weather proof exterior emulsion of approved colour and shade over Primer complete all as specified and directed.

M&L including preparation of newly plastered wall surfaces and applying two coats of cement base paint of any colour over one coat primer complete all as specified and directed.

S&F in Repair brass CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in Repair Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise privided for complete all as directed.

M & L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or slidingwith and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W (Gde- E-250) quality- B incl structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication

Demolition of cement concrete (Un reinforced) in ground floors and pavings n. exc 15 CM thickness (below or above ground level)

M & L PCC 1:3:6 type C2 , using 20mm graded aggregates as in 75mm thick plinth protection including bitumen joints in 1.0 Mtr centre to centre as required.

M & L 100 mm dia flue pipe of mild steel sheet, black in suaitble length as approved by EIC Fixed to wall as specified and directed.

M & L 100 mm dia Bends or elbow , cowls riveted including 15 cm length of flue pipe to as approved by EIC Fixed to wall as specified and directed.

M&L preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.

S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod complete all as specified and as approved

S&F brass chromium plated decorative bracket fixed to wall .

M&L for machine cut Kota stone slab flooring 18-20 mm thick (square or rectangular size.) over cement screed bed laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 109 above but on vertical surface as dado/ skirting.

S & F in repair PVC cabinet looking mirror box type of size 355 x 455 mm all as directed by EIC (prayag or equivalent)

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

M &L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and as directed.

M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendents, regulators etc and making good disturbed surface of walls, floors etc complete all as specified & directed Note :- Light fittings shall be measured & paid separately.

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC consealed conduit of 20mm bore with accessories in wall/roof/floor etc, ISI marked with mild steel/prest ressed steel modular sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, 3mm thick plastic laminated sheet top cover for mounting switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following .

One light or fan point, controlled by one, one way switch 5 Amps.

One socket out let 3 pin 5 Amps on the same board.

One socket outlet of 3 pin 5 Amp on independent board.

One bell point controlled by one 5 amp bell push

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC consealed conduit of 20mm bore with accessories in wall/roof/floor etc, and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.

S&F in repair ceiling rose, PVC of size 65mmx50mm three terminals (ISI marked) all as specified and directed

S & F in repair bell push 5 amp flush type

S & F in repair modular switch 1 way 6A, 1 module.

S & F in repair modular switch 1 way 16A, 1 module

S & F in repair modular socket, 6A - 3 pin combined 2 module

S & F in repair modular modular Socket 6A/16A - 3 pin combined 2 module.

S & F in repair modular fan regulator step type, 120W - 2 module

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 1 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 2 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 3 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 4 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 6 module.

M&L in repair modular metal flush box 1 & 2 module

M&L in repauir modular metal flush box 3 module

M&L in repair modular metal flush box 4 module

M&L in repair modular metal flush box 6 module

S&F in repair MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and asdirected

S&F in repair MCB single pole & neutral 40 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed

S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed

S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 4 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed.

S & F in repair bell ding dong type 230 v, 50 Hz

S&F in repair, lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings and including LED lamp 12 watt complete all as specified and directed by Engineer-in-charge.Make : Crompton Greaves/Havells/Philips/Bajaj

S & F in repair LED building Security light fitting 1x20watt with polycarbonate housing, Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Crompton Greaves/Havells/Philips.

Taking down existing earthing and M&L for new Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 5 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :-(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 5 of MES SSR Part-I.(ii) Item includes the cost of 7.5M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order.(iii) Item includes cost of 7.5 M earth lead wire. Any variation in length shall be adjusted through deviation order.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

S&F in repair service connection of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core multistandard cable flat or circular of 6 Sqmm 2 core including taking down old service cable complete all as specified & directed

M & L in repair for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4 Sq mm (FRLS) of continuous earth wire green in colour complete all as specified and directed . (NOTE: Two runs of 6.0 sqmm cable & One run of 4 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

Taking down old unserviceable LT cable, supply and Laying in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 10 Sqmm 2 core

Excavation in trenches not exceeding 1.5mtr wide & not exceeding 1.5 mtr in depth for laying LT cable, hard/loose soil complete all as specified and as directed.

Returning, filling in trenches with soil, including spreding, leveling, watering & well ramming, in layers not exceeding 25 cm each complete

Removing surplus excavated material (soil) to distance not exceeding 50 Mtr & depositing where directed at level not exceeding 1.5 mtr above the starting point.

S&F Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trench

S&F old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

S & F in repair box type fitting 1x 16w, blue coloured end caps, prewired for LED tube including LED tube 16 watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Cromton Greaves Cat part no for Fitting DMLN1LT8-16 and for LED tube LTT8-16 or Equivalent make of Havells/Philips.

Supply and fix exhaust fan steel boday Ac singal Phase . 230V OF size 300m sweep with ,blades, and frame and louvers.

Supply and Fix electric water heater storage type steel body with copper inner tank and heating element up to2 KW capacity 25 Litre BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, as ,connection piece etc. Make : Bajaj/C&G/ Havell's (Monza EC) Note : Old uns geyser will be deposited to SDO Jamshedpur.

Supply and fixing ceiling fans complete with blades down rods ,electronic regulator and accessories, 230V, 1200MM sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushess direct current motor (BLDC)

UPENDRA KUMAR SINGH (BID ID -3063203)

M/S Manoj Kumar Sinha (BID ID -3068225)