PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME RAMUR MANDER BLOCK BUDHLADA DISTT MANSA

Item Wise Description :

Carriage of Earth, Surkhi, sand, Fly Ash, bajri, ballast, stone boulders, kankar and building rubbish, Earth. Carriage of material excluding initial lead of 5 Km (a) Phillaur Sand (Av. Lead 167 Km) 0 to 167 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (b) Ghaghar Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (c) Bajri Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (d) Filter Media (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR Item No. 6.6

Dismantling Concrete (d) Cement Concrete plain 1:2:4 mix. CSR Item No. 8.6 (d)

Scraping (a) white wash and colour wash CSR Item No. 8.31 (a)

Scraping (c) cement plaster CSR Item No. 8.31 (c)

Cement concrete 1:8:16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.6 (b) (ii)

Cement Concrete 1:2:4 (a) With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.13 (a) (ii)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. CSR Item No. 10.20

12.5 mm thick cement plaster 1:2 CSR Item No. 15.7

12.5 mm thick cement plaster 1:4 CSR Item No. 15.9

White Washing (Three Coat) CSR Item No. 16.3

Bolts and nuts of all sizes and length required CSR Item No. 18.15

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter (6kg/cm2 pressure). (xii) 63 mm o/d Pipe Line CSR Item No. 28.13 + 28.18 + 28.2 (xii)

90 mm o/d Pipe Line (xiv) CSR Item No. 28.13 + 28.18 + 28.2 (xiv)

Providing, Stringing out, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS:7181, Class-B (ISI marked with the prior approval of Engineer-inCharge) and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion fitted complete including all cartage. (d) 150 mm i/d pipe line laid complete. CSR Item No. 28.21 (d)

Supplying and laying C.I. specials as per IS:1538 complete as desired by Engineer-inCharge conforming to ISI specifications. (a) C.I. specials upto 300mm i/d CSR Item No. 28.24 (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (a) 80 mm i/d Sluice Valve CSR Item No. 28.27 (A) (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (b) 100 mm i/d Sluice Valve CSR Item No. 28.27 (A) (b)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (c) 150 mm i/d Sluice Valve CSR Item No. 28.27 (A) (c)

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below (a) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. CSR Item No. 28.51 (a)

Construction of Masonary Sluice Valve Chambar excluding Sluice Valve Cover as per standard design & drawings of Public Health Department. (a) 0.6 x 0.6 m. CSR Item No. 28.66 (a)

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/ Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete. CSR Item No. 28.71

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). (A) R.C.C. Manhole cover (a) 560mm i/d RCC man hole cover with frame as per IS (ii) Medium duty CSR Item No. 29.34 (A) (a) (ii)

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 600 LPM against a head of 13 & 29 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) Raw water Sumping set BHP 3.00 ( Motor with Pump) Discharge 600 LPM. Head 13.00 Mtr

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 600 LPM against a head of 13 & 29 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) Clear water pumping set BHP 7.50 ( Motor with Pump) Discharge 600 LPM. Head 29.00 Mtr

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 600 LPM against a head of 13 & 29 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (iii) Panel Board for Raw water motor of 3.00 BHP

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 600 LPM against a head of 13 & 29 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter. Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (iv) Panel Board for Clear water motor of 7.50 BHP

NON SCHEDULE ITEMS Providing, installing, testing & Commissioning one no. Electronically actuated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Liters of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications.

NON SCHEDULE ITEMS Providing & Fixing C.I. T - TYPE / Rose ventilator complete in all respects.

NON SCHEDULE ITEMS Providing & Fixing Orient Electric Apex-FX 1200mm Ceiling Fan (White) & Regulator etc. complete.

NON SCHEDULE ITEMS Providing & Fixing Crompton Slim Ray 18-Watt LED Tube Light (Cool Day Light) complete.

NON SCHEDULE ITEMS Dismantling brick or flagged stone flooring without concrete base.

NON SCHEDULE ITEMS Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.34 (a), 28.36(a), 30.65 b (i). (i) Water Connection on Old pipe line

NON SCHEDULE ITEMS Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.34 (a), 28.36(a), 30.65 b (i). (i) Water Connection on New pipe line

NON SCHEDULE ITEMS Provision for connecting the proposed pipe with existing pipe line any size including cost of excavation, pipe piece, D-joint, Bailing out etc. complete in all respect.

NON SCHEDULE ITEMS Painting of Sign Board

NON SCHEDULE ITEMS Credit of old sluice valves (3 No. @ 59 kg each) (N.S. Rates) (-)