Renovation of Pond near Hanuman Mandir in Village Bandhwadi in MCG Area.

Amount

NS Item

26.4.2 Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils Area for 500 plants 4m x 4 m = 16 sqm 26.13.6 Digging of pits in all kinds of soil and refilling the same with the excavated earth mixed with well decayed FYM @ 30% of pit volume and insecticide for termite control (excluding cost of FYM and insecticide) Size of pits: 0.60 m x 0.60 m x 0.60 m = 0.216 cum (Manure to be taken from Solid Waste Plant Bandhwari, Gurugram) 26.14 Supply and planting in prepared pits and watering, healthy, vigorous, growing permanent trees including application of 10 ml chlorphriphos 20% EC, planting desired disease free, 200 cm to 220 cm height, 5 cm to 6 cm calliper size stem, full of foliage, ornamental tree sapling each to be supplies in 30 cm x 30 cm poly bags 3.1.3 Carriage of manure from Bandhwari Plant (Average lead of 15 KM up to site of plantation) Quantity of manure required 0.216/3 = 0.07 cum 26.17.1 Providing and fixing single stack for a tree with bamboo 38mm dia 2.40 m long including rope wire etc. New HSR 2021

New HSR Item No. 4.30.2 Extra rates for quantities of works, executed: In or under foul position, including pumping out water as required.

-? 26.4.2 Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils Area 1m x 1 m ? 26.13.6 "Digging of pits in all kinds of soil and refilling the same with the excavated earth mixed with well decayed FYM @ 30% of pit volume and insecticide for termite control (excluding cost of FYM and insecticide) Size of pits: 0.45 m x 0.45 m x 0.45 m = 0.091125 cum (Manure to be taken from Solid Waste Plant Bandhwari, Gurugram)" ? 26.18 Supply and planting disease free, healthy, vigorous, growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 2o cm polybags, application of 10 ml chlorphriphos 20% EC termiticide each and watering through the tractor tanker ? 3.1.3 Carriage of manure from Bandhwari Plant (Average lead of 15 KM up to site of plantation) Quantity of manure required 0.091/3 = 0.03 cum. ? Add EPF 13% on 50 % cost considering as labour component ? Add ESI 3.25% on 50 % cost considering as labour component.

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

6.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1 :4: 8 ( 1 Cement : 4 coarse sand (zone Ill) : 8 graded cum stone aggregate 40 mm nominal size) 2735

HSR 6.25.1 + 6.26.1 "Providing and laying in position machine batched and machinemixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approveddesign mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing andreinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-in-charge. " "Extra for providing richer mixes up to plinth and at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)" (5065.00) SDS.

Arm and ShoulderWheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalet fabricated with main post of 140 mm dia and 3.0 mm thic rest of the pipes are 40mm dia and 2.5 mm thick all pipc made up of hot roiled tubular steel and hot dippe galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of pip are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finishink Padals shall be made up of Nylon alloy with rounded edg of prevent any impact of injury and seat to be made fror virgin LLDPE manufactured by rotational moulding wit minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall b maintenance fire, duly oiled sealed and self lubricated mad bY reputed company to be approved by Officer -in-Charge Equipment to be fitted within built limiters to preven unwanted movements. All open ends of pipe to be colourel by GI/LLDPE caps for user safety. The equipment to b fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the bas Mate cover, all complete as per direction and approval o -2,ngineer-in-Charge regarding material, shape of equipment olour on metal, seat and base cover plate and fixing o equipment etc.

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Manure or sludge at 5km lead on Item No -3.1.3

plantation of specimen or rare trees as per chapter 26 of HSR 2021

Bidder Name

Amount

M/s MDM Construction(GSTN-NA)

ADARSH GROUP(GSTN-NA)

ADARSH GROUP

ADARSH GROUP