Tender for procurement of Laboratory Furniture for Optical Instrumentation and Complex Fluids Lab.

Amount

Main Items

Wall Bench (WB - 1) Size: L 2001 mm x W 750 mm x H 750 mm

Work top in 18 ± 1 mm thick Black Granite construction

750 mm wide storage module with one drawer two shutter

500 mm wide storage module with one drawer one shutter

Leg space

Worktop mounted electrical raceway in GI powder coated construction

6/16 Amp electrical sockets and 16 Amp one way switch

Close Panel in G.I. Construction

Filler Panel in G.I. Construction

Corner Bench (CB-1) Size: L 1030 mm x W 1030 mm x H 750 mm

Work top in 18 ± 1 mm thick Black Granite construction

Corner storage module with one shutter

Worktop mounted electrical raceway in GI powder coated construction

6/16 Amp electrical sockets and 16 Amp one way switch

Filler Panel in G.I. Construction

Wall Bench (WB - 2) Size: L 3755 mm x W 750 mm x H 750 mm

Work top in 18 ± 1 mm thick Black Granite construction

750 mm wide storage module with one drawer two shutters

500 mm wide storage module with one drawer one shutter

Leg space

Worktop mounted electrical raceway in GI powder coated construction

6/16 Amp electrical sockets and 16 Amp one way switch

Filler Panel in G.I. Construction

Wall Bench (WB - 3) Size: L 3820 mm x W 900 mm x H 900 mm

Work top in 18 ± 1 mm thick Black Granite construction

750 mm wide storage module with one drawer two shutters

Leg space

Close Panel in G.I. Construction

Filler Panel in G.I. Construction

Corner Bench (CB - 2) Size: L 1180 mm x W 1180 mm x H 900 mm

Work top in 18 ± 1 mm thick Black Granite construction

Corner storage module with one shutter

Single piece molded PP sink (L 600 x W 450 x D 315)

Worktop mounted three way water tap with swan neck spout

Peg Board in Phenolic resin construction with 20 Nos. PP Pegs

MS 25 X 25 X 1.2 mm Sq. Pipe for Granite Support

Filler Panel in G.I. Construction

Wall Bench (WB - 4) Size: L 3055 mm x W 900 mm x H 900 mm

Work top in 18 ± 1 mm thick Black Granite construction

750 mm wide storage module with one drawer two shutters

Leg space

Single sided double tier reagent rack with electrical raceway

6/16 Amp electrical sockets and 16 Amp one way switch

Vertical Support

Filler Panel in G.I. Construction

Low Constant Volume (LCV) type Bench Fume Hood (Size: L 1800 x D 915 x H 2300 mm) (For AC Lab) Consisting of following : Fume Hood Superstructure Fume Hood Worktop Service Valves Electrical Fittings Controls Fume Hood Understructure Fume Hood Under-Cabinet (Chemical Storage Purpose) Accessories

Exhaust Fan (315 mm Dia) - one fan for 1 Nos. 1800 mm wide Fume Hood Single piece molded UV treated chemical resistant SISW direct driven centrifugal fan in PP constuction with suitable stand in MS powder coated construction, CFM 600 to 700 Corrosive resistant PP Impeller with extra strength,high efficency, properties which produces lower noise and power consumption. Drive - 1 HP, 1400 RPM, 415V, 50Hz., TEFC Class B insulation induction motor with IP55 enclosure, in Non- FLP const. 16A, 3Ph MCB for Fan - Legrand or eq. Make DOL Starter for Motor.

Wall Bench (WB - 7) Size: L 5179 mm x W 750 mm x H 900 mm

Work top in 18 ± 1 mm thick Black Granite construction

750 mm wide storage module with one drawer two shutters

500 mm wide storage module with one drawer one shutter

Leg space

Worktop mounted electrical raceway in GI powder coated construction

6/16 Amp electrical sockets and 16 Amp one way switch

Close Panel in G.I. Construction

Filler Panel in G.I. Construction

Emergency Safety Shower Floor standing, overhead emergency shower with eyewash unit, main frame in SS fabrication

Supply & Installation of exhaust ducting in PP/ FRP (Round Shape) construction (3mm + 2mm) complete with necessary bends, reducers, T-connections, supports, flanges, gaskets, nutbolts etc. (Total Amount for ducting shall be payable as per actual site measurement)