Continued work of providing Electrification by installing transformer in hosaholalu landfill site at TMC Krishnarajapete limit

Continued work of providing Electrification by installing transformer in hosaholalu landfill site at TMC Krishnarajapete limit

PSCC Pole - 9 Mtr Long, 200 Kg WL

11 kV, Horizontal Cross Arm - Galvanised Iron (GI)

HT ST Support 50x8 mm Flat - MS

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mmdia FRP Rod)

Silicon rubber composite insulator 11 kV, 45 kN Polymeric Insulator

Turn Buckle (GI)

Anchor Rod using 12 mm rounds/Guy Rod - MS

No. 15 Strain Insulator

Transportation charges for poles:25 to 105 mtr

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot) 9 Mtr RCC/PSCC Pole NOTE:- Consolidated amount for both loading and unloading.

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

Earth Work Excavation for pipeline/cables by manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shorting, strutting,barricading, caution lights,...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

GI/Copper strips for grounding connections,using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate

Supplying fixing and wiring earth electrode for grounding of lifts, transformers,DG sets etc.using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...

Pipe Grounding -Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Pipe Grounding -Good Quality well burnt charcoal for grounding purpose packed in non returnable gunny bag of 30kg each

Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.

95 Sqmm -11kv-3core-XLPE HTUG Cable(Round Armoured), (54 GI Wires - 2.5 mm Dia)

Making and Fixing pot head for HT Cable only

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing and Fixing G.I. Chain link fabric fencing of required width in mesh size 50X50mm including strengthening with 2 mm dia wire or nuts, bolts, and washers as required complete as per the direct...

Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment.Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of ...

DAS Specification Compact RMU VCB SF6 Type as per IEC 62271 The DAS RMUs shall have the following in addition to the Standards: DC motors, Numerical Relays, Multi functional meters, fault passage indi...

LT Brass Terminal Connector for Transformer (630 Amps, Aprrox. Weight

11 kV,Jointing & Cable Termination Kit as per IS 13573. Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable. 3x95 Sqmm

11 kV, Jointing & Cable Termination Kit as per IS-13573.Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable. 3x95 Sqmm

Collars for RCC Hume Pipe 200 mm Dia

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

RCC Pole - 9 Mtr Long, 145 Kg WL(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9

Mtr Long, 300Kg WL - MS

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300

Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for

mounting of Transfo...

Spiral Earth Electrode

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which arem...

Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood/panel board using necessary screws, bolts nuts necessary phase separators handle and wiring complete. Protection of Overlo...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 70 Sqmm, 3...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden /Aluminum Rollers as directed by the departmental staff. LT Cable. 35 to 95 Sqmm

Heavy Duty Copper Terminal Long Barrel. 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25MM x 6 mm GI strip

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying . A rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Mild Steel (Flats, Bars, Rods, Channels)