SPECIAL REPAIR TO BLOCK NO P93 AND P9FA OF OTM ACCN AT 34 THE MALL FEROZEPUR CANTT AND CERTAIN MINOR WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

M&L raking out joints/ pointing to brick tiles (30cm X 15cm) work in cement mortar laid flat as in floors, roofs, ceilings, chajjas, etc. etc complete all as specified and directed.

M&L for flush pointing to brick tile in roof with cement mortar 1:3 complete all as specified and directed.

M&L 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface. Note : WPC shall be measured and paid for separately.

Supply only water proofing compound complete all as specified and directed.

M&L applying a layer of blown grade of industrial bitumen 85/25 @ 1.20 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed.

M&L plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate)+B135 min radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including formwork complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including bitumen primer complete all as specified and directed.

M&L APP membrane to be finished with one coat of solar reflective bituminious based aluminium [email protected] kg per sqm complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

S&F for pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L providing PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast block, copings, bed plate, hold in down blocks complete all as specified and directed.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shuttersof 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc devided into square with plain chamfered or rounded and rebated sas bar (any no of bars)for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.20(a) complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F 150 mm mild steel pressed handle, oval type, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified and directed.

M&L galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified .

S&F solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent as approved.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.

M&L external rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick rendering in cement mortar 1:3 in ceiling on fair faces of brick work or concrete surfaces is to finished even and smooth(without using extra lime or cement complete all as specified and directed.

Dismantling of floor hearth and wall tilling including mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non-skid ceramic tiles coloured 7 mm to 8 mm thick (square/ rectangular), premium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6, complete all as specified and directed.

M&L non-skid ceramic tiles coloured 7 mm to 8 mm thick (square/ rectangular), premium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, in repair complete all as specified and directed.

S&F 15mm bore bib tap fancy type of chromium plated cast Copper alloy brass, screwed down screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers 38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

M&L white color rotational molded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed.

S&F 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe as in repair complete all as specified and directed.

S&F 15mm bore stop valves bore fancy type, chromium plated, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions in repair complete all as specified and directed.

S&F 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for union, fixed in repair complete all as specified and directed.

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F wash hand basin, flat back 550mmx400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.

M&L preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new plastered surfaces wall and applying two coats of oil bound distember over a coat of primer and applying a coat of 1mm thick wall care putty complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete in ground floor not exceeding 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land complete all as specified and directed.

M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L non-skid coloured ceramic tiles of 7 mm to 8 mm thick , area of Each tile exceeding 0.06 sqm but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour over a screed layer of 15 mm thick in cement mortar 1:6, complete all as specified and directed.

M&L glazed ceramic coloured (colour & shade as approved) tile 350mmx250mm/450mmx350mm and 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

S&F factory made mild steel, box type ventilator with side hung shuttes including projecting type hinges with steel handles and steel peg stay, complete without sash bars, dovtailed or welded complete all as specified and directed.

M&L 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F chromium plated Soapdish Oval /squaretype as fixed in repairs complete all as specified and directed.

S&F Vitreous china white squatting pan Orrissa pattern of size 630mm x 450 mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 70 here-in-before but using old bricks retrieved from dismantling under ser item no 69 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

M&L for half brick thick work with sub class "B" bricks built in cement mortar 1:4 complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) multi-floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

S&F ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L white colour rotational molded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 litre including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and directed.

Dismantling of brick tiles double layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging complete all as specified and directed.

Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.

M&L bedding screed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as directed on roof of concrete surface finished even and smooth without using extra cement including preparation and cleaning of old concrete surfaces or racking out joints in old roof treatment etc complete all as specified and directed. Note:- water proofing compound to be measured and paid for separately.

M&L Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed.

M&L 80 mm thick average consolidated thickness,mud phuska on flat roofs including 25 mm thick mud plaster complete all as specified and directed.

M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.

M&L except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed. Note :- Old brick tiles retreived by dismantling of treatment vide item No 81 here-in-before shall be reused.

M&L flush pointing to roof tiles in cement mortar 1:3 tiles complete all as specified and directed.

Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F mild steel work as in roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces, cleats etc Fe 410-W (Gde E-250) quality B complete all as specified and directed.

S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe- 290 (Gde E- 165) complete all as specified and directed.

M&L pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 250mm long alluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 150mm long extruded anodised Aluminium alloy handles, fabricated type complete all as specified and directed.

S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 100mm extruded Aluminium alloy butt hinges with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness below or above ground level complete all as specified and directed.

M&L use and waste of formwork to sides and soffits of floor or roof beams, beam similar work to rough finish surface of concrete flat complete all as specified and directed.

M&L RCC 1:1½ :3 (using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and similar work complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer chalk whiting and applying a coat of 1mm thick wall care putty complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

M&L complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and a coat of 1mm th wall care putty of approved make as on wall surface and applying two coats of oil based distemper (white or tinted) complete all as specified and directed.

M&L complete removal of old existing surface and applying two coats cement based paint over one coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceiling including cornices complete all as specified and directed.

M&L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed.

M&L sand filling under floors or in foundations or under interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, with grey cement and pigment laid dry over a layer of 25 mm thick sand cushioning complete all as specified and directed. Note :- Sand will be measured and paid seperately

Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. Note:- Cost of new fittings, if required shall deemed inclusive of quoted rates.

Taking up or down 20 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. Note:- Cost of new fittings, if required shall deemed inclusive of quoted rates.

S&F 600mm long chromium plated towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipe of pressure not less than 4kg/Sqm in single socketed in any length with rubber ring joints fixed to walls including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipe of pressure not less than 4kg/Sqm in single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.

S&F PVC (SWR) vent cowl, for 75 mm bore pipe complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as specified in MES schedule part-I & II as in repair complete all as specified and directed.

S&F Gypsum Board 6mm-7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm, Main tee 38mmX23mm, Sub tee 23mmX23mm) including aluminium anodised snap grid frame 605mmX605mm for false ceiling including hanging arrangement as in repair complete all as specified and directed.

Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 1.60mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood orsteel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Dismantling plain or corrugated steel sheet/fibre sheet on roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down carefully Copper/Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One 3 pin socket outlet 5 Amp on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per ser Item No. 133 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F switch piano flush type 15 Amps, single pole one way complete all as specified and directed.

S&F Socket outlet 2 in one , 5/6 Ampere flush type complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watt LED Bulb complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar, Neutral link, Earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp - 40 Amp poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F MCB, Single pole 240 Volts, 6 Amps - 32 Amps 10 KA 'B Series complete all as specified and directed.

S&F LED tube light fitting 1 X 18 Watt decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volts, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Cat Part No LHEXBLP7UN1W018 of Havells or techno-commericially equivalent in approved makes

S&F LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230 Volts of size 300m sweep with, blades, and frame and louvers complete complete all as specified and directed.

S&F 1100 Volts grade heavy duty 6 Sqmm two core cable PVC insulated aluminium stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and porcelean beat not more than one metre apart including 4Sqmm suspension wire, one twin core cable flat or circular complete all as specified and directed.

S&F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as required in repair complete all as specifed and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type) fitted with ABS frame and 415 Volt 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCCB 100 Amps, 415 Volts, 16 KA, 4 Pole complete all as specified and directed.

S&F MCB, Single pole 240 Volt, 6 Amps - 32 Amps 10 KA 'B Series complete complete all as specified and directed.

S&F MCB, single pole and neutral 240 Volt, 40 Amps 10 KA 'B' series complete complete all as specified and directed.

S&F MCB, single pole and neutral 240 Volts, 32 Amps 10 KA 'B' series complete complete all as specified and directed.

S&F sheet metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps complete all as specified and directed.

S&F sub main wiring of 4 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia in repair complete all as specified and directed. Note: Two run of single core 4 Sqmm cable and one run single core 4.0 Sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core and one run of PVC conduit shall be measured as single run.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with Aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and direced.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for taking out and laying underground cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

M&L sand cushioning in trenches for underground cables complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and direced.

M&L bricks (Size 23cm x 11.5cm x 7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of underground cable complete all as specified and direced.

S&F mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e mild steel clamps nuts & bolts etc as required complete all as specified and directed.

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60 cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 meter below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit 50 mm thick pre cast cover of cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

M/s Manoj Construction Co.

Kissan contractor and engg works

M/S N Maini Constrution

Dee Kay EnterPrises

B.L. Chaudhri and Co.

M/s Sarup Singh