REPAIR TO ROOF TREATMENT, JOINERY, FLOORING, PERIODICAL SERVICES AND CERTAIN B/R REPAIR WORKS INSIDE DSC COMPLEX UNDER AGE B/R-I, HYDERABAD

Amount

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4). complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC (DULUX)

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT Note:- (i) The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. ii) Paint work should be carried out by Authorized applicator with brand warranty only. iii) Approval of authorised applicator (Agency name) shall be obtained from GE before commencement of work.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX) Note:- i) Paint work should be carried out by Authorized applicator with brand warranty. ii) The work carryout up to 4 story bldgs and rates are incl necessary empty and Scaffolding. iii) Approval of authorised applicator (Agency name) shall be obtained from GE before commencement of work.

M&L for preparation of old painted steel/iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L in repairs Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Preparation new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

S&F Non skid joint less colored ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match and laid over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles complete all as specified and as directed by Eng-in-Charge.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, suitable for 20mm bore complete all as directed.

M&L for glazed ceramic colored tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or colored cement over and including 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified.

M&L vitrified tiles of any shade 10mm thick (square/ rectangular) polished area of each tiles n. exec 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over and including 20 mm thick screed bed or bedding layer in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises out side MOD land all as specified and directed.

All as per item no. 15 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or colored cement laid over and including 10 mm thick backing coat of cement mortar 1:4.

Demolition of cement Concrete in ground floors and pavings n exec 15 cm thickness (below or above ground level) and removing debris outside MOD land complete all as specified and as directed by Eng-in-charge.

M&L for 100 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over screed bedding layer 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block PU coated with grey cement and pigments any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment over 50mm thick sand cushioning including leveliing the surface with mechanical vibrator complete.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera

Cleaning of Septic tanks of 150 users capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as directed.

S&F in repair vitreous china water closet Orissa pattern of 580 mm x 440 mm white with integral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed. Make: Parryware / HIindware/ Cera

S&F in repairs vitreous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackets , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make: Parryware/ Hindware/ Cera

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe.

S&F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or Prayag / Cera

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked

S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked

S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked

S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed. ISI marked

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked.

S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head screwed down for 15 mm dia iron/CPVC pipe complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repairs 15mm & 20mm GI small fittings such as socket, elbow, nipple, tee, union, Double Nipple etc for galvanized iron 15mm & 20 mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing up to 1.5m included in rates.

Removal of air lock/ blockage in 15mm/ 20mm bore GI water tubing, cleaning the pipe and fittings etc complete all as directed. Note:-(Work shall be carried out up to G+2 storey bldg, contractor to quote rates accordingly)

Repairs to leakage from inlet/ outlet of over head water storage tanks, GI pipe line by using M-seal or tightening of check nut or replacing check nut etc complete all as directed.

S&F in repairs Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 1000 liters capacity.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup board shutter, shelves and similar items fixed to timber frame/Beading work complete all as specified and directed.

S&F in repairs chromium plated brass double soap dish with screws complete.

S&F in repairs 40mm dia brass polished cup board knobs fixed with nuts and screws all as directed.

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed. Make: Jaguar/Hindware/Parryware

S&F in repair telephone hand shower complete all as directed. Make:Jaquar/Hindware/Parryware

S&F in repair for Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs plastic cover water closet seat cover white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging devise complete all as directed.

Taking down chowkats or frame with shutters but each exceeding 1.50 Sqm not exceeding 4sqm

M&L for preparation of new painted Steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed.

S&F 40 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F mild steel butt hinges, heavy weight cold rolled 100 mm size complete all as specified. Butt hinges,

S&F 150 mm long Aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 1.25mm thick pressed steel door frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc., including PCC filling 1:3:6 type C0 (using 12.5mm graded stone aggregate) filling in the frames complete all as directed.

S&F 35mm thick factory made 1st class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

M&L running welding in repairs exec 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed.

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodized mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanized wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

Taking down wash hand basin/ sink vitreous china of any size and re-fixing the same after replacing rusted damaged brackets with 50x50x6mm thick angle arion brackets including cutting for and pinning in ends of brackets complete all as directed.

S&F in repairs 40mm dia waste coupling of PTMTsuitable for wash basin/ sink half or full threaded( minimum weight 60gms) complete all as directed.

All as per item No.65 above but suitable for urinals, (Minimum weight 32mm-45gms dia 32mm all complete all as directed.

Cleaning floor/ Nahani trap blockages up to 1st manholes of any length and dia by roding and removing the materials (sludge) to a distance exec 200 Mtrs away from the residensial area all as directed.

Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as directed.

Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs from mouths of circulating pipes etc complete all as directed.

M&L date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YY”

S&F in repairs syphon set suitable for PVC low level flushing cistern of any type complete all as directed.

S&F in repairs 15mm dia bib tap, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 105gms) complete all as directed.

S&F in repairs 15mm dia pillar tap, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed.

Supply and fix in repairs MS single action spring hinges with steel wire springs, stove enameled black 125mm long complete with necessary screws/welding complete all as directed.

Resecuring the shutters without taking down of any description of area exec 1sqm and n exec 2sqm each after carrying out necessary repair complete all as directed.

S& Fix in repairs floor door stopper of aluminium alloy body and tongue anodized with hard steel spring 150 mm fixed to door complete all as directed .

S&F in repairs 125mm size aluminium handles, cast type, anodized complete all as directed.

S&F in repairs 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as directed.

S&F in repairs 100mm long MS steel butt hinges complete all as directed.

M&L for preparation of old decorated surfaces of ceiling cornices, pilasters etc and applying one coat of white wash complete all as directed.

M&L for preparation of new wooden surfaces over 10 cm width/girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down existing roof treatment of any position with bituminous felt including plaster / loose concrete and removing rubbish to a distance exceeding 100 mtr and not exec 250 mtrs and roughing the surface of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc all as specified and directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M& L for Cement concrete 1:2:4 type B-1 ( 20 mm Graded stone aggregate size in pavements, laid in required slope and camber in panels as required including consolidation finishing and tamping complete

M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule.

Supply only integral water proofing compound Make :- SCOTT AQUA PROF/IMPERMO/Dr FIXIT/FOSROC

Providing and carry out water proofing treatment to sound, moisture free concrete surface system includes proper surface preparation to remove loose dust, dirt, loose mortar , curing compound etc carry out cementations injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticized expansive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortar prepare by using Nit bond SBR latects, application of polymer modified batta at floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementoinous grouts. Andulated surface and pot hole shall be treated with epoxy mortar or putty to obtained sound/ leveled surface. Application of primer Nito proof WB primer on sound mortar slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurethane coating supplied in 25 kg drum coverage @ 2.30 Kg/ m2 to achieve 1.5mm thickness in two coats complete including all tools and tackles as per manufacturers specification. Coating shall be having crack bridging of 2mm, elongation ( ASTMD 124 ) greater than 600 percentage, tensile strength ( ASTM D412) , 2.5 N/MM2 , recovery from elongation ( ASTM D412) , 95 percentage, 85 percentage of solid continents, tear resistance ( ASTM D624) , 15 KN/M, shore A hardness ( ASTM D2240) , 60, water vapor transmission not more than 1 gm / M2 ,water permeability ( DIN -1048) - NIL, services temperature - 40'c to 70 degree 'c , flash point greater than 70'C HSE guidelines :- It is recommended to provide adequate general and local exhaust ventilations, providing protection to Eye, face, Hand and other skin by wearing appropriate grouse, Gougle, face cilid, respiratory protectionist. directed in SDS of the product.

Anjana corporation

SRI SAI ENTERPRISES

ELEVATORS MAINTENANCE ENGINEER WORKS

SUN LIGHT HOUSE

Venkat Sai Enterprises

Maruthi international

M/s ANUSHA ENTERPRISES